CN  Vol.1 No.2 , November 2009
Mobile Positioning System Based on the Wireless Sensor Network in Buildings
ABSTRACT
Established on the Intel Multi-Core Embedded platform, using 802.11 Wireless Network protocols as the communication medium, combining with Radio Frequency-Communication and Ultrasonic Ranging, imple-ment a mobile terminal system in an intellectualized building. It can provide its holder such functions: 1) Accurate Positioning 2) Intelligent Navigation 3) Video Monitoring 4) Wireless Communication. The inno-vative point for this paper is to apply the multi-core computing on the embedded system to promote its com-puting speed and give a real-time performance and apply this system into the indoor environment for the purpose of emergent event or rescuing.

Cite this paper
nullX. LI, G. SUN and X. WANG, "Mobile Positioning System Based on the Wireless Sensor Network in Buildings," Communications and Network, Vol. 1 No. 2, 2009, pp. 96-100. doi: 10.4236/cn.2009.12015.
References
[1]   S. Akhter and J. Roberts, Multi-Core Programming, 2007.

[2]   Multi-Core Programming on Windows (Student Workbook), Intel Corporation, 2006.

[3]   A. Nakano, “OpenMP programming,” University of Southern California, 2006.

[4]   T. M. Wang, The development of Embedded system, 2003.

[5]   P. Burton, “An introduction to MPI programming,” February 2009.

[6]   S. Gezici, “A survey on wireless position estimation,” Wireless Personal Communications Manuscript, 2007.

[7]   Y. Liu, “A comparison between some location techniques,” Applied Science and Technology, 9th Period, Vol. 32, 2005.

[8]   L. M. Sun and J. Z. Li, Wireless Sensor Networking, 2005.

[9]   H. B. Yu and P. Zeng, Intelligent Wireless Sensor System, 2006.

[10]   A. Stentz, “Optimal and efficient path planning for partially-known environments,” In Proceedings IEEE International Conference on Robotics and Automation, May 1994.

[11]   C. L. Li and J. Gao, Visual C++ Serial Communication and Typical Examples, 2006.

[12]   S. H. Kang and A. Zakhor, “Effective bandwidth based scheduling for streaming multimedia,” in Proceedings of 2003 International Conference on Image Processing (ICIP 2003), Piscataway, IEEE Press, NJ, Vol. 3, pp. 633–636, 2003.

[13]   X. Q. Zhu, J. P. Singh, and B. Girod, “Video streaming over wireless: Where TCP is not enough,” Information Systems Laboratory, Stanford University, April 2008.

[14]   M. Goel, S. Appadwedula, N. R. Shanbhag, et al., “A low-power multimedia communication system for indoor wireless applications,” in 1999 IEEE Workshop on Signal Processing Systems, SiPS 99, pp. 473–82, October 1999.

[15]   Z. H. Yao, D. Tian, and L. S. Shen, “The research of real time video coding based on H.263,” Journal of Circuits Andystems, Vol. 3, 2002.

[16]   K. Rijkse, “H. 263: Video coding for, Low-bit-rate communication,” KPN Research, IEEE Communication Magazine, December 1996.

 
 
Top