JQIS  Vol.1 No.3 , December 2011
On the Reversal Effects of the Velocity Quotient on the Directions of Changes of Finishing Results of Conventional and Flexible Grinding
Abstract: The paper presents the problem of right direction of changes of the velocity quotient in view of getting advantageous smoothing results of material finishing using a compact elastic wheel. In fact the problem has been considered reversely in comparison with the change direction of the velocity quotient on the grounds of knowledge on grinding using ceramic wheels. The specifics of performance of the elastic wheels are considered. The investigation was carried out on the effect of their peripheral velocity on the directions of smoothing. The problem is considered by presenting it on the background of determined results of grinding using a ceramic wheel. The dependence of a determined roughness measure of the smoothed surface on the velocity quotient is delivered. The forms of a function approximating experimental dependences of the subject roughness measure on the mentioned quotient have been derived. Furthermore, the results coming out of the performed experimental studies have been presented.
Cite this paper: nullZ. Pluta and T. Hryniewicz, "On the Reversal Effects of the Velocity Quotient on the Directions of Changes of Finishing Results of Conventional and Flexible Grinding," Journal of Quantum Information Science, Vol. 1 No. 3, 2011, pp. 149-160. doi: 10.4236/jqis.2011.13021.

[1]   M. Rodziewicz, “Mechanical Polishing of Metals,” WNT, Warszawa, 1968.

[2]   Z. Pluta, “Fundamentals of Surface Smoothing Using Elea- sic Grinding Wheels,” Wydawnictwo Politechniki Kosza- lińskiej, Koszalin, 2007.

[3]   “‘Soft’ Grinding Wheel for Polishing and Micro-Chips Removal,” Prospectus of SLIP-NAXOS, 2000.

[4]   “Elastic Grinding Wheels,” Catalogue of ARTIFEX, 1999.

[5]   “Elastic Polishing Wheels,” Prospectus of Grinding Wheels Manufacture of Grodzisk Mazowiecki, Poland, 1998.

[6]   “Programme of Kronem-R-Flex Abrasives,” Prospectus of KLINGSPOR, 2001.

[7]   “Grinding and Polishing,” Catalogue of LUKAS, 2002.

[8]   “Systems of Abrasive Materials. Delivery Programme,” Catalogue of 3M, 1997.

[9]   T. Sier?ant, E. Weiss and Z. Weiss, “Selected Problems of High-Speed Grinding,” Biuletyn Techniczny, Vol. 19, No. 9-10, 1975, pp. 109-114.

[10]   F. I. Klocke, “High-Speed Grinding Fundamentals and State of the Art in Europe, Japan and the USA,” Annals of the CIRP, Vol. 46, No. 2, 1977, pp. 715-724.

[11]   “Grinding with Elastic Bond. High Peripheral Velocities Favour Effectiveness of Machining,” Maschinen und Wer- kzeug, Vol. 100, No. 1-2, 1999, pp. 44-45.

[12]   J. Kaczmarek, “Fundamentals of Chip, Abrasive, and Ero- sive Treatment,” WNT, Warszawa, 1970.

[13]   L. Burnat, “Grinding and Superfinish of Metals,” WNT, Warszawa, 1962.

[14]   M. Kieda, A. Hamada and S. Shiratori, “Polishing of Sili- con Single Crystals with an Elastic Wheel,” Annals of the CIRP, Vol. 23, No. 1, 1974, pp. 103-104.

[15]   Z. Pluta and K. Wo?niak, “Some Aspects of Manufacture and Use of Abrasive Tools of Porous Elastic Bonds,” Post?py Technologii Maszyn i Urz?dzeń, Vol. 7, No. 3, 1983, pp. 39-56.

[16]   K. Wo?niak, “Manufacture of Elastic Abrasive Tools of Polyurethane Bonds,” Chemik, Vol. 35, No. 11-12, 1982, pp. 137- 141.

[17]   Z. Pluta, “Effect of Machining Parameters using Elastic Grinding Wheels on the Surface Quality,” Werkstatt und Betrieb, Vol. 7, No. 6, 1988, pp. 487-489.

[18]   Z. Pluta and K. Wo?niak, “Cutting Ability with Abrasive Grains Obtained from Post-Copper Slag,” Werkstatt und Betrieb, Vol. 121, No. 10, 1988, pp. 843-847.

[19]   W. Kacalak and Z. Pluta, “Grinding and Polishing Using Elastic Abrasive Wheels,” Schleifen und Trennen, Vol. 107, No. 2, 1983, pp. 7-11.

[20]   S.-S. Cho, Y.-K. Ryu and S.-Y. Lee, “Curved Surface Finishing with Flexible Abrasive Tool,” International Journal of Machine Tools Manufacture, Vol. 42, No. 2, 2002, pp. 229-236. doi:10.1016/S0890-6955(01)00106-7

[21]   S. Makuch and W. Kacalak, “The Elastic Properties of the Flexible Grinding Tools with Polyurethane Bonds,” Advances in Manufacturing Science and Technology, Vol. 30, No. 1, 2006, pp. 89-99.

[22]   Z. Pluta and T. Hryniewicz, “Verification of Forecasts on Surface Finishing Results of Peripheral Smoothing,” International Journal of Advanced Manufacturing Tech- nology, Vol. 42, No. 5-6, 2009, pp. 515-522. doi:10.1007/s00170-008-1616-0

[23]   Z. Pluta and T. Hryniewicz, “Initial Cutting Conditions by Abrasive Grain Fixed Flexibly,” International Journal of Advanced Manufacturing Technology, Vol. 43, No. 5-6, 2009, pp. 440-448. doi:10.1007/s00170-008-1722-z

[24]   Z. Pluta, “Butt-Mounted Elastic Wheel,” Utility Pattern RP No. 55144, 1997.

[25]   Z. Pluta, “Mounting to Fix Flat Abrasive Wheels of High Susceptibility,” Patent RP No. 171852, 1997.

[26]   Z. Pluta and A. Markiewicz, “Elastic Wheels,” Utility Pattern RP No. 53832, 1996.

[27]   Z. Pluta, “The Way and Device to Smooth External Ro- tary Surface with a Disk-Type Grinding Wheel of High Susceptibility,” Patent RP No. 168170, 1996.

[28]   Z. Pluta, “The Effect of Bond Kind on Some Properties of Elastic Wheels,” Mechanik, Vol. 64, No. 3, 1991, pp. 110-116.

[29]   K. Wo?niak and Z. Pluta, “Use of Elastic Abrasive Wheels of Post-Copper Slag to Polish Colour Metals,” Werkstatt und Betrieb, Vol. 120, No. 1, 1987, pp. 55-58.

[30]   Z. Pluta and K. Wo?niak, “The Effect of Machining Para- meters on the Surface Roughness Smoothed by the Grinding Wheels of Porous Elastic Bonds,” Post?py Tech- nologii Maszyn i Urz?dzeń, Vol. 11, No. 1-2, 1987, pp. 45-58.

[31]   Z. Pluta and T. Hryniewicz, “Advanced Model of the Tool Edge Blunting under Machining,” International Journal of Advanced Manufacturing Technology, Vol. 51, No. 1-4, 2010, pp. 35-43. doi:10.1007/s00170-010-2595-5

[32]   K. Mańczak, “Technique of Experiment Planning,” WNT, Warszawa, 1976.

[33]   H. Szyd?owski, “Theory of Measurements,” PWN, Wars- zawa, 1978.

[34]   E. B. Wilson Jr., “Introduction to Scientific Studies,” 2nd Edition, PWN, Warszawa, 1968.

[35]   W. E. Deming, “Statistical Adjustment of Data,” Wiley, New York, 1938.