JSSM  Vol.4 No.4 , December 2011
Service Value Stream Management (SVSM): Developing Lean Thinking in the Service Industry
ABSTRACT
This paper presents a comprehensive lean approach, based on Value Stream Management (VSM), which makes it possi- ble to enhance the performance of a service, by spotting and tackling its criticalities. The study is motivated by the growing need to extend lean concepts to the service industry and, on the other hand, by a lack of operating tools capa- ble to support technical staff in this effort. Specifically, to tailor VSM to the specific requirements of pure services, sub- stantial modifications were made: 1) for a detailed map of the process new icons were created, 2) most of the lean approaches were adapted/modified and 3) concepts such as Takt-Time and Pitch have been redefined in a more suitable way. To validate the approach, an application concerning an enrolment process is presented. Results demonstrate the quality of the approach and confirm the significant improvements that can be obtained with the application of lean thinking to the service context.

Cite this paper
nullA. Bonaccorsi, G. Carmignani and F. Zammori, "Service Value Stream Management (SVSM): Developing Lean Thinking in the Service Industry," Journal of Service Science and Management, Vol. 4 No. 4, 2011, pp. 428-439. doi: 10.4236/jssm.2011.44048.
References
[1]   D. Tapping, “The Lean Office Pocket Guide: Tools for the Elimination of Waste in Administrative Areas,” MCS Media, Inc., 2005.

[2]   H. Acland, “Disaffected Nation,” Marketing, Vol. 8, 2005, pp. 32-35.

[3]   D. Dickson, R. Ford and B. Laval, “Top Ten Excuses for Bad Service,” Organisational Dynamics, Vol. 34, No. 2, 2005, pp. 168-204. doi:10.1016/j.orgdyn.2005.03.001

[4]   J. Maleyeff, “Exploration of Internal Service Systems Using Lean Principles,” Management Decision, Vol. 44, No. 5, 2006, pp. 674-689. doi:10.1108/00251740610668914

[5]   F. Abdi, S. Shavarini and S. Hoseini, “Glean Lean: How to Use Lean Approach in Services Industries?” Journal of Services Research, Vol. 6, Special Issue, 2006, pp. 191- 206.

[6]   B. Ehrlich, “Service with a Smile: Lean Solutions Extend Beyond the Factory Floor,” Industrial Engineer, Vol. 38, No. 8, 2006, pp. 40-44.

[7]   P. Hines, M. Holweg and N. Rich, “Learning to Evolve: A Review of Contemporary Lean Thinking,” International Journal of Operations & Production Management, Vol. 24, No. 10, 2004, pp. 994-1011. doi:10.1108/01443570410558049

[8]   S. Bashin and P. Burcher, “Lean Viewed as a Philosophy,” Journal of Manufacturing technology Management, Vol. 17, No. 1, 2006, pp. 56-72. doi:10.1108/17410380610639506

[9]   Y. C. Wu, “Lean Manufacturing: A Perspective of Lean Suppliers,” International Journal of Operations & Produ- ction Management, Vol. 23, No. 11, 2003, pp. 1349-1376. doi:10.1108/01443570310501880

[10]   P. Hines, A. L. Martins and J. Beale, “Testing the Boundaries of Lean Thinking: Observation from the Legal Service Sector,” Public money & management, Vol. 28, No. 1, 2008, pp. 35-40.

[11]   K. Juroff, “Lean it’s not Just for the Shop Floor Anymore,” Automotive Industries, Vol. 183, No. 12, 2003, p. 45.

[12]   P. Hines and N. Rich, “The Seven Value Stream Mapping Tools,” International Journal of Operations & Production Management, Vol. 17, No. 1, 1997, pp. 46-64. doi:10.1108/01443579710157989

[13]   M. Emiliani, “Cracking the Code of Business,” Management Decision, Vol. 38, 2000, pp. 60-79. doi:10.1108/00251740010317423

[14]   N. Piercy and N. Rich, “Lean Transformation in the Pure Service Environment: The Case of the Call Service Center,” International Journal of Operations & Production Management, Vol. 29, No. 1, 2009, pp. 54-76. doi:10.1108/01443570910925361

[15]   M. Braglia, G. Carmignani and F. Zammori, “A New Va- lue Stream Mapping Approach for Complex Production Systems,” International Journal of Production Research, Vol. 44, No. 18-19, 2006, pp. 3929-3952. doi:10.1080/00207540600690545

[16]   J. Bicheno and M. Holweg, “The Lean Toolbox: The Essen- tial Guide to Lean Transformation,” Picsie Books, Buc- kingham, 2009.

[17]   B. Kollberg, J. Dahlgaard and P. Brehmer, “Measuring Lean Initiatives in Health Care Services: Issues and Findings,” International Journal of Productivity and Perfor- mance Management, Vol. 56, No. 1, 2007, pp. 7-24. doi:10.1108/17410400710717064

[18]   D. Sarkar, “Lean for Service Organizations and Offices: A Holistic Approach for Achieving Operational Excellence and Improvements,” Quality Press, Milwaukee, 2007.

[19]   I. Serrano, C. Ochoa and R. De Castro, “An Evaluation of the Value Stream Mapping Tool,” Business Process Ma- nagement Journal, Vol. 14, No. 1, 2008, pp. 39-52. doi:10.1108/14637150810849391

[20]   B. Singh, S. K. Garg and S. K. Sharma, “Value Stream Mapping: Literature Review and Implications for Indian Industry,” The international Journal of Advanced Manu- facturing Technology, Vol. 53, No. 5-8, 2010, pp. 799- 809. doi:10.1007/s00170-010-2860-7

[21]   P. Hines, N. Rich, J. Bicheno, D. Brunt, D. Taylor, C. Butterworth and J. Sullivan, “Value Stream Management,” The International Journal of Logistic Management, Vol. 9, No. 1, 1998, pp. 25-42. doi:10.1108/09574099810805726

[22]   M. Braglia, M. Frosolini and F. Zammori, “Uncertainty in Value Stream Mapping Analysis,” International Journal of Logistic: Research and Application, Vol. 12, No. 6, 2009, pp. 435-453. doi:10.1080/13675560802601559

[23]   M. L. Emiliani and D. J. Stec, “Using Value-Stream Maps to Improve Leadership,” The leadership & Organization Development Journal, Vol. 25, No. 8, 2004, pp. 622-645. doi:10.1108/01437730410564979

[24]   F. Holmes, “Is Your Office as Lean as Your Production Line?” Manufacturing Engineering, Vol. 139, No. 3, 2007, pp. 20-21.

[25]   C. Canel, D. Rosen and E. A. Ancerson, “Just-in-Time is not just for Manufacturing: A Service Perspective,” Industrial Management & Data Systems, Vol. 100, No. 2, 2000, pp. 51-60.

[26]   Y. Monden, “Toyota Production System: An Integrated Approach to Just-in-Time,” 2nd Edition, Industrial Engineering and Management Press, Norcross, 1993.

 
 
Top