1.1. Particulate Matters
Particulate Matters (PM) are a complex mixture of particles that can be solid, liquid or both vary in size, composition, and origin. The specific composition and size distribution of PM varies by region, time of year, time of day, weather conditions and other factors (WHO, 2001) .
1.1.1. PM Categories
PM can be divided into four categories:
• TSP: (Total Suspended Particulates): particulate matter with an upper size limit of approximately 100 µm.
• PM10: particles with a diameter less than 10 micrometers (course particles), such as those found near roadways and dusty industries, and pose a health concern because they can be inhaled into and accumulate in the respiratory system.
• PM2.5: particles with a diameter less than 2.5 micrometers (fine particulates) such as those found in smoke and haze, and are believed to pose the largest health risks. PM2.5 has very small size less than one-seventh the average width of a human hair and can lodge deeply into the lungs and reach terminal bronchioles and alveoli.
• UFPs (Ultrafine Particulates): particles with a diameter less than 0.1 micrometer (PM0.1) (WHO, 2001) .
1.1.2. PM Sources
It is imperative to survey sources to solve the problem of PM high concentrations. PM sources may be natural or anthropogenic: 1) Natural sources that include dust storms, pollen grains and spores, volcanic eruptions, forest and grassland fires and sea spray. 2) Anthropogenic sources that include industrial processes, combustion of fossil fuel, either by stationary sources or by transportation, construction and demolition activities, exciting of road dust in the atmosphere (especially in unpaved roads), domestic solid waste, smoking, and agricultural operations (US EPA, Dec. 2009) .
1.1.3. Health Effects
Exposure to PM10 and PM2.5 has adverse effects on human health whether in the short or long terms. US/EPA published a reference about Integrated Science Assessment for Particulate Matter (ISA PM) in December 2009, which included inventory of different health effects of PM10 and PM2.5 which scientific studies had shown that there was an explicit correlation between PM concentrations and these diseases. (US EPA, Dec.2009) .
1) Exposure to PM2.5
PM2.5 considered more influential than PM10 on human health because of its ability to penetrate the respiratory system and access to trachea and primary bronchi. Research studies have shown that exposure to large concentrations of PM2.5 leads to different health problems in respiratory and circulatory systems and cause mortality as shown in Table 1 (US EPA, Dec.2009) .
2) Exposure to PM10-2.5
Different epidemiologic studies have done to find correlation between PM10 concentrations and different health diseases as shown in Table 2 (US EPA, Dec.2009) .
1.2. Air Quality Index
The AQI is an index for reporting daily air quality. As the AQI increases, an increasingly large percentage of the population is likely to experience increasingly severe adverse health effects. Different countries have their own air quality indices that are not all consistent. Different countries also use different names for their indices such as Air Pollution Index and Pollutant Standards Index (PSI). Computing AQI requires an air pollutant concentration from a monitor or model. The function used to convert from air pollutant concentration to AQI varies by pollutant, and is different in different countries. AQI values are divided into ranges, and each range is assigned a descriptor and a color code. Standardized public health advisories are associated with each AQI range (David Mintz, Sept. 2012) .
Table 1. Summary of causal determinations for short-term exposure to PM2.5.
Table 2. Summary of causal determinations for short and long-term exposure to PM10-2.5.
1.3. Study Area
The study area is Alexandria governorate, the second largest industrial city in Egypt. It has the latitude and longitude of 31˚13'N and 29˚58'E, with a population more than 4.6 million according to the latest report of CAPMAS, 2012 . Measurements and survey carried out in the seven sites of EEAA monitoring stations and eighth site as background as shown in Table 3 and Figure 1 (IDSC, Dec 2011) .
1.4. Environmental Problem
This thesis was prepared to study the environmental problem of the very high concentrations of PM10 and PM2.5 that have serious health effects. Available data as in WHO report about polluted cities classified Egypt as one of the most polluted countries all over the world (WHO, 2001)  , CAPMAS Annual reports from 2003 to 2011 recorded that the annual average concentrations of PM10 in Alexandria city were higher than AQLs (IDSC, Dec 2011)  , as shown in Table 4 and Figure 2. In addition, there is lacking of data about PM2.5 although it has highly risk impact than PM10.
Figure 1. Showing the background site and other measurement sites.
(*)according to EIMP/EEAA.
Figure 2. Annual average concentrations of PM10 in Alexandria (μg/m3).
Table 4. Annual Average Concentrations of PM10 (μg/m3) (IDSC, Dec 2011) .
(*)US/EPA revoked the annual PM10 NAAQS in 2006.
2. Material and Methods
2.1. Monitoring Instruments
To complete this research, multiple devices have been used such as, CEL-712 MICRO DUST PRO to measure PM10 and PM2.5, GPS to determine locations of measurement points on the map, and digital camera to document different activities of the ambient measurement locations which would help us in the interpretation of the figures and results.
2.2. Previous Data Sources
Previous data collected from different sources such as (EEAA) and (CAPMAS), Table 4.
2.3. Metrological Data
Climatic variables are considered as one of the very important factors in understanding and analyzing any results of all air pollutants and significantly affect the concentration of pollutants in the air and help in identifying places which highly affected by any contaminant.
Results of PM10 and PM2.5 measurements compared to AQLs in:
1) The local legislations that issued by the ministry of state for environmental affairs represented by EEAA as shown in Table 5.
2) AQLs of US/EPA as shown in Table 6.
3) AQLs of EC as shown in Table 7.
Table 5. AQLs for PM, EEAA (EEAA, 2011) .
Table 6. NAAQS for PM, US/EPA. (http://www.epa.gov/ttn/naaqs/standards/pm/s_pm_history.html) (Last visit: 05/ 07/ 2015) .
Table 7. AQLs of air pollutants for EC (http://ec.europa.eu/environment/air/quality/standards.htm) (Last visit: 05/07/2015) .
2.5. Air Quality Index (AQI)
AQI is a number used by government agencies to communicate to the public how polluted the air is currently or how polluted it is forecast to become as mentioned above. In this study, AQI of PM in United States (US/EPA, Dec 2011) (11)―Table 8―and Air Quality Forecast in Egypt (EEAA)―Table 9―used for assessment of results.
The equation that’s used to calculate the AQI is: 
I = the (Air Quality) index,
C = the pollutant concentration,
Clow = the concentration breakpoint that is ≤C,
Chigh = the concentration breakpoint that is ≥C,
Ilow = the index breakpoint corresponding to Clow,
Ihigh = the index breakpoint corresponding to Chigh.
PM10 Air Quality Forecast used in this research to create another one for PM2.5. Both AQFs consist of the same categories and the same color icons. The only difference was decreasing of ranges according to AQLs. PM10 has AQL of 150 µg/m3 for 24-hrs and PM2.5 has AQL of 100 µg/m3 for 24-hrs and hence all values of PM10 Pollution Index was multiplied by correction factor 0.67 to create a new Air Quality Forecast for PM2.5 as shown in Table 10.
Table 8. AQI Ranges, Colors and Descriptors in US/EPA (US/EPA, Dec 2011) .
Table 9. Air Quality Forecast of PM10_EEAA (http://www.eeaa.gov.eg/English/main/env_air_aqi.asp (Last visit: 03/07/2015)) .
Table 10. New Air Quality Forecast of PM2.5.
2.6. Study Area; Alexandria Governorate
The study area was Alexandria Governorate; major industrial center in Egypt. Alexandria lies on the Mediterranean Sea at the western edge of the Nile River delta as shown in Figure 3. It has the latitude and longitude of 31˚13'N and 29˚58'E. On 01 January 2013, population in Alexandria has reached to 4,616,625 citizens that represent approximately 5% of the population of Egypt (CAPMAS, 2012) .
Alexandria is considered a moderate climate to great extent compared to other governorates. Temperatures range between 4˚C in the winter season, 39˚C in the summer season and average annual temperature reach to 21˚C. Total rainfall has reached 150.64 mm during 12 months (from 01 July 2014 to 30 June 2015). As for the wind, the average wind speed over the past year did not exceed 12 km/hr and the prevailing wind in Alexandria always has been from the northwest. PM measurements were conducted during the last month of spring season (from May 21, 2015 to June 20, 2015). These period recorded readings were very close to the annual average temperature and wind speed as shown in Table 11, as well as this period did not record rainfall at all and hence there no wet deposition of PM occurred (http://www.wunderground.com) .
3. Results and Discussion
PM10 and PM2.5 were measured in seven sites in Alexandria which representing different activities as shown in Figure 4. These sites include Abu Keir, El-shouhada Square, El-Max, IGSR, El-Asafra, Ghait El-Inab, and El-Nahda.
For PM10 Results, El-Nahda site recorded the highest average concentration (1805 µg/m3), while Ghait El-Inab site recorded the lower average concentration (170 µg/m3). When comparing concentrations to AQLs of EEAA and US/EPA (150 µg/m3); All sites were higher than AQLs except Ghait El-Inab. When comparing concentrations to AQL of EC (50 µg/m3); All sites were higher than AQLs as shown in Table 12 and Figure 5.
For PM2.5 Results, El-Nahda site also recorded the highest average concentration (1368 µg/m3), while Ghait El-Inab site recorded the lower average concentration (70 µg/m3). When comparing concentrations to AQL of EEAA (100 µg/m3); All sites were higher than AQL except Ghait El-Inab. When you compare results up to AQL of US/EPA (35 µg/m3); All sites were higher than AQL without any exceptions as is shown in Table 13 and Figure 6.
PM10 and PM2.5 were compared to the Air Quality Forecast which created by EEAA. For PM10 Results, three sites were classified as “Emergency” (>650 µg/m3) while two sites were classified as “Alert” (420 to 549 µg/m3) while one site was
Figure 3. Alexandria governorate.
Figure 4. PM10 and PM2.5 measurements using Casella Dust Detective (Created in: 31 May 2015).
Figure 5. Comparison between PM10 conc. (μg/m3) and air quality forecasts.
Table 11. Metrological data, El-Nouzha station, Alexandria (21 May: 20 June 2015). (http://www.wunderground.com) .
Table 12. Summary of results for PM10 measurements in all sites.
Table 13. Summary of PM10 Air quality forecasts according to EEAA limits.
Figure 6. Pie chart for air quality forecast of PM10 conc. in all sites.
classified as “Attention” (350 to 419 µg/m3) and another site was classified as “Normal” (100 to 199 µg/m3) as shown in Table 14 and Figure 7. For PM2.5 Results, five sites were classified as “Emergency” (>434 µg/m3) while one site was
Figure 7. Comparison between PM2.5 conc. (μg/m3) and Air Quality Forecasts.
Table 14. Summary of PM10 AQIs according to US/EPA limits.
In addition, PM10 and PM2.5 concentrations were compared to the AQI which created by US/EPA. These AQIs calculated according to the previous equation that mentioned in 3.5.2. AQIs were not applicable for three sites that have PM10 concentrations higher than 604 µg/m3 as shown in Table 16 and for five sites that have PM2.5 concentrations higher than 500.4 µg/m3 as shown in Table 17.
The background measurement site in the north coast recorded 108 μg/m3 for PM10 while PM2.5 recorded 85 μg/m3 and both were below than AQLs of EEAA and classified as “Normal” in the EEAA Air Quality Forecast.
3.1. Expected Sources of PM
There are several potential sources of PM pollution which was noticed during
Table 15. Summary of results for PM2.5 measurements in all sites.
Table 16. Summary of PM2.5 Air Quality Forecast according to EEAA limits.
Table 17. Summary of PM2.5 AQI according to US/EPA limits.
Figure 8. Pie chart for air quality forecast of PM2.5 conc. in all sites.
measurements in different sites. Those sources may be natural (such as dust storms and pollens) or may be anthropogenic sources.
Major anthropogenic probable sources which noticed were industrial Activities, Demolition and construction, unpaved streets, solid wastes, and fuel Combustion.
3.1.1. Industrial Activities
Alexandria is the largest industrial city (with ≈40% of the total Egyptian industry). There are 280,000 registered industrial firms and 1,837,000 registered handicraft workshops. It has 10 industrial zones with total area 22,687 Acre as shown in Table 18. Many industries are considered to be major sources of PM pollution such as cement, fertilizers, ceramic, chemical, and timber industries (http://www.alexandria.gov.eg (Last visit: 24/07/2015)) .
3.1.2. Demolition and Construction
Construction and demolition wastes are considered to be one of the major anthropogenic sources of PM pollution. Its adverse effects increase with wind movement especially when it leaved without disposal in designated places. In 2010, demolition wastes in Egypt have reached 41.7 million tons (IDSC, Dec 2011) .
3.1.3. Unpaved Streets
According to CAPMAS reports, 1035 km approximately of roads in Alexandria unpaved (equivalent to 21% of roads in the governorate)―Table 19―while the number of licensed vehicles up to 622,542 vehicles at the end of December 2012.
83221 of them are Lorries and 10,208 trucks as well as others that entering and leaving daily from the governorate (IDSC, Dec 2011) .
This huge number of cars with the presence of nearly a quarter of the streets
Table 19. Paved and Unpaved roads, Alexandria, 2012.
of Alexandria unpaved inevitably lead to raise dust and the high concentrations of PM10 and PM2.5 in ambient air significantly.
3.1.4. Solid Wastes
Agricultural residues in Alexandria became 212.7 thousand tons in 2010 while household wastes reached to 969.3 thousand tons and hence Alexandria became the third governorate (after Cairo and Giza) in terms of waste generation (CAPMAS, 2012) . Garbage companies cannot collect all these quantities of wastes on a regular basis and keep part of it in streets that causes dust creation in the ambient air with any slight increase in winds movement.
3.2. Adverse Effects on Human Health
We start searching for statistics on the prevalence of respiratory and cardiovascular diseases rates in Alexandria to compare them to what has been accessed from the concentrations of PM10 and PM2.5 in order to demonstrate the relationship that was recognized in epidemiologic studies that mentioned above. However, we did not find any data except limited statistics of respiratory diseases in Egypt as shown in Table 20 (CAPMAS, 2012) .
Table 20. Cases of admissions and deaths in central and general hospitals, Egypt (2010:2012). (CAPMAS, 2012) .
We cannot say for sure that the PM2.5 was the only cause of those rates of patients and deaths as there is interference with other reasons that may be other air pollutants. It may be also because of genetic factors or otherwise. However, PM2.5 remains one of reasons that led to the occurrence of these diseases and deaths, but we cannot accurately determine the percentage of its impact.
3.3. Management Options
There are several management options for mitigating these high concentrations of PM10 and PM2.5 and hence protect human health from adverse effects that mentioned above. These options include,
1) Increasing awareness about ISO2600 (CSR) and ISO 14001,
2) Restructuring EIMP/EEAA monitoring stations and supporting them with PM2.5 monitors,
3) Using different PM collection devices in industrial activities,
4) Reducing AQL of PM2.5, and
5) Increasing Environmental law enforcement firmly.
3.3.1. Implementation of Integrated ISO 26000 and ISO 14001
CSR is the traditional way to refer to the role of a business in contributing positively to the larger community in which it operates. ISO 26000 uses the term Social Responsibility (SR) to refer to this concept, to show that its guidance can be used by all kinds of organizations (ECOLOGIA, May 2011) .
However, since this handbook is designed especially for the needs of small and medium size businesses, we have used CSR the more familiar term throughout. ISO 26000 identifies seven core subjects that socially responsible businesses should address. Implementers of ISO 26000 should evaluate their actions in each of the core subjects, to identify what they are doing in their current practices, and to set priorities for improvements (ECOLOGIA, May 2011) . ISO 26000 has seven core subjects which are
1) Organizational governance: Practicing accountability and transparency at all levels of your organization; using leadership to create an organizational culture which uses core values of social responsibility when making business decisions.
2) Human rights: Treating all individuals with respect; making special efforts to help people from vulnerable groups.
3) Labor practices: Providing just, safe and healthy conditions for workers; engaging in two way discussions to address workers’ concerns.
4) Environment: Identifying and improving environmental impacts of your operations, including resource use and waste disposal.
5) Fair operating practices: Respecting the law; practicing accountability and fairness in your dealings with other businesses, including your suppliers.
6) Consumer issues: Providing healthy and safe products, giving accurate information, and promoting sustainable consumption.
7) Community involvement and development: Getting involved in the betterment of the local communities that your organization operates in; being a good neighbor (ECOLOGIA, May 2011) .
ISO 14001 is an internationally agreed standard that sets out the requirements for an environmental management system. It helps organizations improve their environmental performance through efficient use of resources and reduction of waste, gaining a competitive advantage and the trust of stakeholders (ISO Central Secretariat, 2015) .
ISO 14001 helps:
• Demonstrate compliance with current and future statutory and regulatory requirements.
• Increase leadership involvement and engagement of employees.
• Improve company reputation and the confidence of stakeholders through strategic communication.
• Achieve strategic business aims by incorporating environmental issues into business management.
• Provide a competitive and financial advantage through improved efficiencies and reduced costs.
• Encourage better environmental performance of suppliers by integrating them into the organization’s business systems.
Implementation of integrated ISO 2600 and ISO 14001 will solve many environmental problems. For example, Wadi El-Qamar Street can be paved as Social responsibility of surrounding companies in this area according to 7th ISO 26000 core subject or as Improvement of their environmental performance by decreasing PM emitted because of transporting raw materials and products according to ISO 14001 (ISO Central Secretariat, 2015) .
3.3.2. Restructuring of EIMP/EEAA Monitoring Stations
Quick review of the administrative border of the Alexandria governorate―Figure 3 shows that the monitoring stations need to restructure as:
1) Nearly western half of the Alexandria does not have monitoring stations, although it includes the New Borg El-Arab city, which includes several industrial zones.
2) Total area of cultivated land in Alexandria governorate is 18,120,000 Acre according to IDSC in 2010 (8,427,000 old land + 9,642,000 new land) with total cropped area of 31,612,000. Most of those agricultural areas are located in the southern part of Alexandria and there is no monitoring stations represent agriculture areas, although it is considered downwind for all industrial areas.
3) There are 6 stations of the seven which include instruments to monitor PM10 and none of them include any device for measuring PM2.5 although it is the most dangerous to human health.
3.3.3. Reducing Pollution from the Source
PM collection occurs when the particle leaves the entraining air and contact a collecting surface. There are different applicable techniques such as elutriators, cyclones, electrostatic precipitator, etc.
1) Elutriators for PM collection
Elutriators used for PM collection can have either vertical or horizontal orientation. A simplified horizontal elutriators design shown in Figure 9 (Robert F. Phalen, and Robert N. Phalen, 2013) .
Cyclones (and aerosol centrifuges) impart a rotational velocity to the particle-containing air stream that produced an increased artificial g-force (gravitational acceleration), sometimes called a “centrifugal” force, to the particles. The increased g-force increases the collection efficiency, especially for small particles that normally settle slowly. A common cyclone design used for PM collection is shown in Figure 10 (Robert F. Phalen, and Robert N. Phalen, 2013) .
3) Electrostatic precipitator
Charged particles in an electrical field can encounter electrostatic forces that greatly exceed resistive drag and gravitational forces. Charged particles are attracted to oppositely-charged and grounded bodies. The velocity with charged particle move toward a collecting surface can be more than 1000 times greater than the particle's terminal settling velocity. The movement of an electrically-charged particle toward a collector is the mechanism by which an electrostatic precipitator (ESP) operates. Particles that are to be collected need not carry an initial electrical charge; Figure 11 (Robert F. Phalen, and Robert N. Phalen, 2013) .
4) Spray towers
Spray towers typically introduce a water spray that falls downward through an upward-flowing “dirty” air stream. Contaminant particles are collected on the
Figure 9. Cross sectional view of a simplified horizontal elutriator (Robert F. Phalen, and Robert N. Phalen, 2013) .
Figure 10. Simplified aerosol cyclone (Robert F. Phalen, and Robert N. Phalen, 2013) .
Figure 11. Electrostatic precipitator (Robert F. Phalen, and Robert N. Phalen, 2013) .
falling water droplets by impaction and diffusion. Gases are collected by diffusion to the water droplets where they are absorbed. A demister (e.g., wire screens) above the sprayer section collets contaminated water droplets before they exit at the top of the tower. Cleaned air exits above the demister at the top of the tower. Water droplets and condensed water (from the demister) fall into a sump or drain at the bottom of the tower, Figure 12 (Robert F. Phalen, and Robert N. Phalen, 2013) .
Figure 12. Spray tower (Robert F. Phalen, and Robert N. Phalen, 2013) .
5) Venturi Scrubbers
Venturi Scrubbers operate on the principles similar to spray towers. They differ in that the contaminated air usually flows downward toward a converging “throat” where it is rapidly accelerated. Liquid is introduced along the wall above the converging section, where it is aerosolized upon encountering the reduced pressure in the throat. The aerosolized and falling collection liquids contacts and collects the downward flowing particles and gases in a diverging lower section of the scrubber, Figure 13 (Robert F. Phalen, and Robert N. Phalen, 2013) .
6) Bag filters
Bag filters are specialized filters that are preferable to simple flat filters because they can be repeatedly cleaned and reuse. Thus, they do not require frequent replacement. Bag filters are widely used for the collection of PM in high-throughput applications, such as coal-fired power plants, or for other industrial processes that require efficient dust emission controls, Figure 14 (Robert F. Phalen, and Robert N. Phalen, 2013) .
7) Packed beds
Packed beds, such as those containing activated charcoal or collections of glass, metal, or plastic beads, are used for efficiently collecting particles and gases, including caustic substances. The beads can be coated with various substances to improve their performance (Robert F. Phalen, and Robert N. Phalen, 2013) .
3.3.4. Reducing PM2.5 AQL
PM2.5 not included in the Egyptian environmental law till 2011, and also its AQLs in the new amendment (for 24-hr and annual average) is noticed to be higher than all international AQLs as shown in Figure 15. It must be reduced to be compatible with international AQLs.
Figure 13. Schematic diagram of Venturi Scrubbers (Robert F. Phalen, and Robert N. Phalen, 2013) .
Figure 14. Example of bag-house dust collector design (Robert F. Phalen, and Robert N. Phalen, 2013) .
Figure 15. Comparison between PM2.5 AQLs (Local and International).
3.3.5. Environmental Law Enforcement Firmly
One of the most serious problems that lead to increasing of PM pollution is “soft” enforcement of environmental regulations. The response of industry to current environmental regulations in Alexandria, Egypt was investigated. Environmental officers in 55 industrial firms completed a questionnaire examining their opinions about current environmental regulations, the statuses of their companies’ compliance with those regulations, and the environmental management progress and problems in their companies. Although Egyptian industrialists had positive opinions about environmental regulations, their companies were not in satisfactory compliance with those regulations. The context in which environmental concern started in Egypt and the economic environment of Egyptian industry had led to “soft” enforcement and implementation of environmental regulations. The response of Alexandria's industrial firms to the issued environmental regulations was limited to adopting symbolic “end-of-pipe” environmental protection measures. Progress in environmental management and problems in industries of Alexandria were also investigated (Hisham El-Zayat, Gihan Ibraheem, and Sherif Kandil, April 2006) .
4. Conclusions and Recommendations
1) El-Nahda site recorded the highest concentration of PM10 and PM2.5 while Ghait El-Inab site recorded the lower concentration.
2) For PM10 Results; three sites were classified as “Emergency”―Air pollution is (Very High)―according to Air Quality Forecast of EEAA, two sites were classified as “Alert”, one site was classified as “Attention”―Air pollution in both sites is (High), and another site was classified as “Normal”―Air quality is (Good).
3) For PM2.5 Results; five sites were classified as “Emergency” according to Air Quality Forecast of EEAA―Air pollution is (Very High), one site was classified as “Moderate”―Air quality is (Moderate), and another site was classified as “Normal”―Air quality is (Good).
4) Most probable anthropogenic sources of these high concentrations of PM10 and PM2.5 include industrial activities as Alexandria governorate has more than 40% of industries in Egypt, unpaved roads which represent 21% of roads in Alexandria, randomized demolition and construction work, and solid wastes.
5) All previous research studies confirm that PM2.5 is more serious than PM10 on both the short term and long term. PM2.5 has high ability to penetrate respiratory system as well as it remains suspended in the air for longer time than PM10. PM2.5 is causal of some cardiovascular diseases and mortality, likely to be Causal of Respiratory Effects, and Suggestive to be causal of some Reproductive and Developmental diseases, Cancer, Mutagenicity, and Genotoxicity.
6) AQLs of PM2.5 in the Egyptian Environmental Law according to last amendment (for 24-hr and annual average) are noticed to be higher than all international AQLs for the ambient environment. On the other hand, PM2.5 hasn’t AQL in the Egyptian Environmental Law for the working environment till now.
7) Nearly western half of the Alexandria does not have monitoring stations, although it includes the New Borg El-Arab city that includes several industrial zones.
1) Implementation of integrated ISO 26000 and ISO 14001 can help in solving many environmental problems.
2) EIMP/EEAA monitoring stations need restructuring plan to cover all areas and all activities in Alexandria.
3) EIMP/EEAA must be supported with PM2.5 monitors as it’s more serious than PM10 and there are lacking of data about this pollutant and hence.
4) Particulate Matters control systems such as bag filters, Packed beds, wet and dry Scrubbers must be used in all industrial activities to reduce PM pollution from the source not to adopt “end-of-pipe” environmental protection measures.
5) AQL of PM2.5 in the ambient environment must be reduced to meet international limits. It must be included in the working environment parameters also.
6) Environmental law must be applied strictly.
7) Increase the multidisciplinary co-operation especially between environment and public health specialists.
This work was supported by (AMATEC Consulting Foundation for Environmental & Scientific Assistance).
AQHI Air Quality Health Index
AQI Air Quality Index
AQL Air Quality Limits
CAPMAS Central Agency for Public Mobilization and Statistics
CSR Corporate Social Responsibility
EC European Commission
EEAA Egyptian Environmental Affairs Agency
GPS Global Positioning System
IDSA Information and Decision Support Center
IGSR Institute for Governmental Service and Research
ISA Integrated Science Assessment
NAAQS National Ambient Air Quality Standards
PI Pollution Index
PM Particulate Matters
PM10 Particulate Matters with a diameter less than 10 μm
PM2.5 Particulate Matters with a diameter less than 2.5 μm
PSI Pollutant Standards Index
PUF Polyurethane Foam
SAS Static Air Sampling
TSP Total Suspended Particulates
UFPs Ultrafine Particulates
US/EPA United States/Environmental Protection Agency
WHO World Health Organization
 Mintz, D. (2012) Technical Assistance Document for the Reporting of Daily Air Quality—The Air Quality Index (AQI). US Environmental Protection Agency Office of Air Quality Planning and Standards Research Triangle Park, North Carolina.
 (2015) http://www.wunderground.com
 (2015) http://www.alexandria.gov.eg
 El-Zayat, H., Ibraheem, G. and Kandil, S. (2006) The Response of Industry to Environmental Regulations in Alexandria, Egypt. Journal of Environmental Management, 79, 207-214.