Back
 EPE  Vol.3 No.5 , November 2011
Optimal Operation and Size for an Energy Hub with CCHP
Abstract: The interest in distributed generation has been increasing in recent years, especially due to technical devel- opment on generation systems that meet environmental and energy policy concerns. One of the most impor- tant distributed energy technologies is Combined Cooling, Heat and Power (CCHP) systems. CCHP is a small and self-contained electric, heating and cooling generation plant that can provide power for households, commercial or industrial facilities. It can reduce power loss and enhance service reliability in distribution systems. The proposed method in this paper determines the optimal size and operation of CCHP, auxiliary boiler and also heat storage unit as elements of an energy hub, for users by an integrated view of electricity and natural gas network. Authors apply cost and benefit analysis in the optimization. To confirm the proposed method, the optimum sizes of these elements are determined for a hotel in Tehran as a case study.
Cite this paper: nullA. Mohammad Ranjbar, A. Moshari, H. Oraee and A. Sheikhi, "Optimal Operation and Size for an Energy Hub with CCHP," Energy and Power Engineering, Vol. 3 No. 5, 2011, pp. 641-649. doi: 10.4236/epe.2011.35080.
References

[1]   M. Rabinowitz, “Power Systems of the Future. I,” IEEE Power Engineering Review, Vol. 20, No. 1, 2000, pp. 5- 16. doi:10.1109/39.814649

[2]   C. Mitchell, “The Value of Dis-tributed Generation-Policy Implications for the UK,” IEE Col-loquium on Economics of Embedded Generation, London, 29 October1998, pp. 1/1-111.

[3]   J.-H. Teng, Y.-H. Liu, C.-Y. Chen and C.-F. Chen, “Va- lue-Based Distributed Generator Placements for Service Quality Improvements,” Electrical Power and Energy Systems, Vol. 29, No. 3, 2007, pp. 268-274. doi:10.1016/j.ijepes.2006.07.008

[4]   M. Geidl, “Integrated Modeling and Optimization of Mul- ticarrier Energy Systems,” Doctoral and Habilitation The- ses, Power Systems Laboratory, ETH, Zurich, 2007

[5]   R. Billinton and R. N. Allen, “Reliabil-ity Evaluation of En- gineering Systems, Concept and Tech-niques,” 2nd Edi- tion, Plenum Press, New York, 1992.

[6]   R. Graham and W. Chow, “Technical and Economic As- sessment of Combined Heat and Power Technologiesfor Commercial Customer Applications”, EPRI Project Ma- nager, 2003.

[7]   M. Geidl, G. Koeppel, P. Favre-Perrod, B. Kl?ckl, G. An- dersson and K. Fr?hlich, “Energy Hubs for the Futures,” IEEE Power & Energy Magazine, Vol. 5, No. 1, 2007, pp. 24-30.

[8]   G. Koepple and G. Anderson, “The Influence of Combi- ned Power, Gas and Thermal Networks on the Re-liability of Supply,” The Sixth World Energy System Conference, Torino, 10-12 July 2006, pp. 646-651.

[9]   J. Teng, Y. Liu, C. Chen and C.-F. Chen, “Value-Based Distributed Generator Placements for Service Quality Im- provements,” International Journal of Electrical Power & Energy Systems, Vol. 29, No. 3, 2007, pp. 268-274. doi:10.1016/j.ijepes.2006.07.008

[10]   H. Asano and S. Bando, “Operational Planning Method and Economic Analysis of Mi-crogrid with Intermittent Re- newable Energy and Battery Sto-rage,” 29th IAEE Inter- national Conference, Potsdam, 7-10 June 2006.

[11]   P. M. Costa and M. A. Matos, “Economic Analysis of Mi- crogrids including Reliability Aspect,” Interna-tionl Con- ference on Probabilistic Methods Applied to Power Sys- tem, Stockholm, 11-15 June 2006, pp. 1-8.

[12]   B. Maur-hoff and G. Wood, “Dispersed Generation Redu- ce Power Costsand Improve Service Reliability,” Rural Electric Power Conference, Louisville, May 2000, pp. C5/1- C5/7.

[13]   A. Silvestri, A. Berizzi and S. Buonanno, “Distributed Ge- neration Planning Using Genetic Algorithms,” Interna- tional Conference on Electric Power Engineering, 1999. PowerTech Budapest 99, Budapest, 29 August-2 Septem- ber 1999, p. 257.

[14]   A. S. Siddiqui, C. Marnay, O. Bailey and K. H. LaCom- mare, “Optimal Selection Of On-Site Generation with Com- bined Heat and Power Applications,” International Jour- nal of Distributed Energy Resources, Vol. 1, No. 1, 2005, pp. 33-62.

[15]   A. R. Abdelaziz and W. M. Ali, “Dispersed Generation Plan- ning Using a New Evolutionary Approach,” IEEE Bolog- na Power Tech Conference, Bologna, 23-26 June 2003, p. 5.

[16]   J. A. Greatbanks, D. H. Popovic, M. Begovic, A. Pregelj, and T. C. Green, “On Optimization for Security and Reli- ability of Power Systems with Distributed Generation,” IEEE Bologna Power Tech Conference, Bologna, 23-26 June 2003, p. 8.

[17]   H. M. Groscurth, T. Bruckner and R. Kümmel, “Model- ing of Energy Service Supply System”, Energy, Vol. 20, No. 9, 1995, pp. 941-958. doi:10.1016/0360-5442(95)00067-Q

[18]   I. Bouwmans and K. Hemmes, “Optimising Energy Sys- tems—Hydrogen and Dis-tributed Generation,” 2nd Inter- national Symposium on Power System Market Aspects, Stockholm, 2-4 October 2002.

[19]   R. H. Lasseter and P. Piagi, “Microgrid: A Conceptual Solution,” IEEE 35th Annual Power Electronics Special- ists Conference, Aachen, 20-25 June 2004, pp. 4285-4290.

[20]   R. Frik and P. Favre-Perrod, “Proposal for a Multifunctio- nal Energy Bus and Its Interlink with Generation and Con- sumption,” Diploma The-sis, Power Systems and High Vol- tage Laboratories, ETH, Zurich, 2004.

[21]   M. Geidl, “A Greenfield Approach for Future Power Sys- tems,” Proceedings of Cigre Session 41, Paris, 2006.

[22]   J. Kanter, “Europe Considers New Taxes to Promote ‘Clean’ Energy,” The New York Times, 22 June 2010. http://www.nytimes.com/2010/06/23/business/energyenvironment/23carbon.html?_r=2&ref=cap_and_trade

[23]   P. Vassilo-poulos, “Models for the Identification of Mar- ket Power in Wholesale Electricity Markets,” UFR Indu- strial Organization DEA, Vol. 129, September 2003, pp. 46-47.

[24]   D&R, “2009 Buildings Energy Data Book,” D&R Inter- national, Ltd., 2009.

[25]   Y. J. Ruan, et al., “Optimal Option of Distributed Gene- ration Technologies for Various Commercial Buildings,” Applied Energy, Vol. 86, No. 9, 2009, pp. 1641-1653. doi:10.1016/j.apenergy.2009.01.016

[26]   A. K. Basu and S. Chowdhury, “Impact of Strategic De- ployment of CHP-Based DERs on Microgrid Reliability,” IEEE Transactions on Power Delivery, Vol. 25, No. 3, 2010, pp. 1609-1705.

[27]   H. Cho, “Evaluation of CCHP Systems Performance Based on Opera-tional Cost, Primary Energy Consumption, and Carbon Dioxide Emission by Utilizing an Optimal Operation Scheme,” Applied Energy, Vol. 86, No. 12, 2009, pp. 2540-2549. doi:0.1016/j.apenergy.2009.04.012

[28]   ONSITE SYCOM Energy Corporation, “The Market and Technology Potential for Combined Heat and Power in the Industrial Sector,” Washington DC, January 2000.

[29]   http://www.eia.doe.gov/oil_gas/natural_gas/info_glance/natural_gas.html

[30]   http://www.eia.doe.gov/cneaf/electricity/epm/table5_3.html

[31]   “2008 ASHRAE Hand-book—HVAC Systems and Equip- ment,” ASHRAE, 2008.

[32]   C. Marnay, et al., “Optimal Technology Selection and Ope- ration of Commercial-Building Microgrids,” IEEE Tran- sactions on Power Systems, Vol. 23, No. 3, 2008, pp. 975- 982.

 
 
Top