GSC  Vol.1 No.4 , November 2011
Cu(II) Extraction in Ionic Liquids and Chlorinated Solvents: Temperature Effect
Abstract: Room temperature ionic liquids have been currently used in liquid/liquid extraction processes in order to substitute conventional organic solvents. In this paper, a series of chlorinated solvents and 1-alkyl-3-me- thylimidazolium-based ionic liquids were selected to study the extraction efficiency of a lipophilic polya- mine 1,1,7,7-tetraethyl-4-tetradecyldiethylenetriamine (TE14DT) towards the model ion Cu(II) in such dif-ferent media. The effect of temperature on the extraction efficiency was also investigated. The metal ion par-tition was found to be strongly dependent on both the nature of the solvent and on the working temperature. The viscosity of ionic liquids and the water content in ionic liquid were found to affect the extraction effi-ciency of TE14DT. The chemical nature of the cation of ionic liquids, and in particular the alkyl chain length on imidazolium ring, also seemed to be important in determining the efficiency of the extraction process. Finally, preliminary experiments on back-extraction of Cu(II) ions from ionic liquid also revealed interesting hints to the development of a continuous transport process.
Cite this paper: nullR. Germani, M. Mancini, N. Spreti, P. Profio and G. Savelli, "Cu(II) Extraction in Ionic Liquids and Chlorinated Solvents: Temperature Effect," Green and Sustainable Chemistry, Vol. 1 No. 4, 2011, pp. 155-164. doi: 10.4236/gsc.2011.14024.

[1]   R. Liu, J. F. Liu, Y. G. Yin, X. L. Hu and G. B. Jiang, “Ionic Liquids in Sample Preparation,” Analytical and Bioanalytical Chemistry, Vol. 393, No. 3, 2009, pp. 871-883. doi:10.1007/s00216-008-2445-6

[2]   H. Zhao, S. Xia and P. Ma, “Use of Ionic Liquids as ‘Green’ Solvents for Extractions,” Journal of Chemical Technology & Biotechnology, Vol. 80, No. 10, 2005, pp. 1089-1096. doi:10.1002/jctb.1333

[3]   V. A. Cocalia, J. D. Holbrey, K. E. Gutowski, N. J. Bri- dges and R. D. Rogers, “Separations of Metal Ions Using Ionic Liquids: The Challenges of Multiple Mechanisms,” Tsinghua Science & Technology, Vol. 11, No. 2, 2006, pp. 188-193. doi:10.1016/S1007-0214(06)70174-2

[4]   G.-T. Wei, J.-C. Chen and Z. Yang, “Studies on Liquid/ Liquid Extraction of Copper Ion with Room Temperature Ionic Liquid,” Journal of the Chinese Chemical Society, Vol. 50, No. 6, 2003, pp. 1123-1130.

[5]   M. L. Dietz, “Ionic Liquids as Extraction Solvents: Where do We Stand?” Separation Science and Technology, Vol. 41, No. 10, 2006, pp. 2047-2063. doi:10.1080/01496390600743144

[6]   L. Brinchi, P. Di Profio, R. Germani, G. Savelli and N. Spreti, “Structurally Simple Lipophilic Polyamines as Ca- rriers of Cupric Ions in Bulk Liquid Membranes,” European Journal of Organic Chemistry, Vol. 2002, No. 5, 2002, pp. 930-937. doi:10.1002/1099-0690(200203)2002:5<930::AID-EJOC930>3.0.CO;2-I

[7]   L. Brinchi, R. Germani, M. V. Mancini, G. Savelli and N. Spreti, “Carrier-Mediated Transport of Toxic Heavy Me- tal Ions in Bulk Liquid Membranes,” European Journal of Organic Chemistry, Vol. 2004, No. 6, 2004, pp. 1330- 1335. doi:10.1002/ejoc.200300622

[8]   N. Spreti, L. Brinchi, R. Germani, M. V. Mancini and G. Savelli, “A New Carrier for Selective Removal of Heavy Metal Ions from Aqueous Solutions through Bulk Liquid Membranes,” European Journal of Organic Chemistry, Vol. 2004, No. 18, 2004, pp. 3865-3871. doi:10.1002/ejoc.200400222

[9]   N. Spreti, L. Brinchi, R. Germani, M. V. Mancini and G. Savelli, “Quantitative Removal of Mercury(II) from Water by Lipophilic Polyamines through Bulk Liquid Membranes,” European Journal of Organic Chemistry, Vol. 2006, No. 19, 2006, pp. 4379-4384. doi:10.1002/ejoc.200600249

[10]   S. C. N. Hsu, C.-J. Su, F.-L. Yu, W.-J. Chen, D.-X. Zhuang, M.-J. Deng, I.-W. Sun and P.-Y. Chen, “Ex- tracting Cu(II) from Aqueous Solutions with Hydrophobic Room-Temperature Ionic Liquid in the Presence of a Pyridine-Based Ionophore to Aattempt Cu Recovery: A Laboratory Study,” Electrochimica Act, Vol. 54, No. 6, 2009, pp. 1744-1751. doi:10.1016/j.electacta.2008.09.068

[11]   K. Kidani, N. Hirayama and H. Imura, “Extraction Be- havior of Divalent Metal Cations in Ionic Liquid Chelate Extraction Systems Using 1-Alkyl-3-methylimidazolium bis (trifluoromethansulfonyl) imides and thenoyltrifluo- roacetone”, Analytical Sciences, Vol. 24, No. 10, 2008, pp. 1251-1254. doi:10.2116/analsci.24.1251

[12]   R. Germani, M. V. Mancini, G. Savelli and N. Spreti, “Mercury Extraction by Ionic Liquids: Temperature and Alkyl Chain Length Effect,” Tetrahedron Letters, Vol. 48, No. 10, 2007, pp. 1767-1769. doi:10.1016/j.tetlet.2007.01.038

[13]   E. Visser, R. P. Swatloski, W. M. Reichert, R. Mayton, S. Sheff, A. Wierzbicki, J. H. Davis and R. D. Rogers, “Task-Specific Ionic Liquids Incorporating Novel Cations for the Coordination and Extraction of Hg2+ and Cd2+: Synthesis, Characterization, and Extraction Studies,” Environmental Science & Technology, Vol. 36, No. 11, 2002, pp. 2523-2529. doi:10.1021/es0158004

[14]   E. Visser, R. P. Swatloski, W. M. Reichert, R. D. Rogers, R. Mayton, S. Sheff, A. Wierzbicki and J. H. Davis, “Task-Specific Ionic Liquids for the Extraction of Metal Ions from Aqueous Solutions,” Chemical Communications, No. 1, 2001, pp. 135-136. doi:10.1039/b008041l

[15]   S. Keskin, D. Kayrak-Talay, U. Akman and O. Horta?su, “A Review of Ionic Liquids towards Supercritical Fluid Applications,” Journal of Supercritical Fluids, Vol. 43, No. 1, 2007, pp. 150-180. doi:10.1016/j.supflu.2007.05.013

[16]   S. I. Nikitenko and P. Moisy, “Formation of Higher Chlo- ride Complexes of Np(IV) and Pu(IV) in Water-Stable Room-Temperature Ionic Liquid [BuMelm][Tf2N],” In- organic Chemistry, Vol. 45, No. 3, 2006, pp. 1235-1242.

[17]   S. I. Nikitenko, C. Cannes, C. Le Naour, P. Moisy and D. Truber, “Spectroscopic and Electrochemical Studies of U(IV)-Hexachloro Complexes in Hydrophobic Room Tem- perature Ionic Liquids [BuMeIm][Tf2N] and [MeBu3N] [Tf2N],” Inorganic Chemistry, Vol. 44, No. 25, 2005, pp. 9497-9505. doi:10.1021/ic051065b

[18]   R. Fernandez-Galan, B. R. Manzano, A. Otero, M. Lanfranchi and M. A. Pellinghelli, “19F and 31P NMR Evidence for Silver Hexafluorophosphate Hydrolysis in Solution. New Palladium Difluorophosphate Complexes and X-ray Structure Determination of [Pd(η3-2-Me-C3H4)(PO2F2) (PCy3)],” Inorganic Chemistry, Vol. 33, No. 10, 1994, pp. 2309-2312. doi:10.1021/ic00088a039

[19]   C. Chiappe and D. Pieraccini, “Ionic Liquids: Solvent Properties and Organic Reactivity,” Journal of Physical Organic Chemistry, Vol. 18, No. 4, 2005, pp. 275-297. doi:10.1002/poc.863

[20]   J. Dupont, R. F. de-Souza and P. A. Z. Suarez, “Ionic Li- quid (molten salt) Phase Organometallic Catalysis,” Che- mical Reviews, Vol. 102, No. 10, 2002, pp. 3667-3692. doi:10.1021/cr010338r

[21]   J. Dupont, “On the Solid, Liquid and Solution Structural Organization of Imidazolium Ionic Liquids,” Journal of the Brazilian Chemical Society, Vol. 15, No. 3, 2004, pp. 341-350. doi:10.1590/S0103-50532004000300002

[22]   A. Mele, C. D. Tran and S. H. De Paoli-Lacerda, “The Structure of a Room-Temperature Ionic Liquid with and without Trace Amounts of Water: The Role of C-H???O and C-H???F interactions in 1-N-butyl-3-me-thylimidazolium Tetrafluoroborate,” Angewandte Chemie International Edition, Vol. 42, No. 36, 2003, pp. 4364-4366. doi:10.1002/anie.200351783

[23]   J. G. Huddleston, A. E. Visser, W. M. Reichert, H. D. Willauer, G. A. Broker and R. D. Rogers, “Characteriza- tion and Comparison of Hydrophilic and Hydrophobic Room Temperature Ionic Liquids Incorporating the Imidazolium Cation,” Green Chemistry, Vol. 3, No. 4, 2001, pp. 156-164. doi:10.1039/b103275p

[24]   G. Fadeev and M. M. Meagher, “Opportunities for Ionic Liquids in Recovery of Biofuels,” Chemical Communications, Vol. 3, 2001, pp. 295-296.

[25]   J. McLean, M. J. Muldoon, C. M. Gordon and I. R. Dunkin, “Bimolecular Rate Constants for Diffusion in Ionic Liquids,” Chemical Communications, No. 17, 2002, pp. 1880-1881. doi:10.1039/b202944h

[26]   S. V. Dzyuba and R. A. Bartsch, “Influence of Structural Variations in 1-Alkyl(aralkyl)-3-methylimidazolium Hexa- Fluorophosphates and Bis(trifluoromethyl-sulfonyl)imides on Physical Properties of the Ionic Liquids,” Chemical Physics, Vol. 3, No. 2, 2002, pp. 161-166. doi:10.1002/1439-7641(20020215)3:2<161::AID-CPHC161>3.0.CO;2-3

[27]   K. R. Seddon, A. Stark and M. J. Torres, “Viscosity and Density of 1-Alkyl-3-methylimidazolium Ionic Liquids,” In: M. A. Abraham, L. Moens, Eds., Clean Solvents: Alternative Media for Chemical Reactions and Processing, American Chemical Society, Washington, 2002, pp. 34-49. doi:10.1021/bk-2002-0819.ch004

[28]   C. F. Poole, “Chromatographic and Spectroscopic Me- thods for the Determination of Solvent Properties of Room Temperature Ionic Liquids”, Journal of Chromatography A, Vol. 1037, No. 1-2, 2004, pp. 49-82. doi:10.1016/j.chroma.2003.10.127

[29]   J. F. Liu, J. A. Jonsson and G. B. Jiang, “Application of Ionic Liquids in Analytical Chemistry,” Trends in Analytical Chemistry, Vol. 24, No. 1, 2005, pp. 20-27. doi:10.1016/j.trac.2004.09.005

[30]   J. Jacquemin, P. Husson, A. A. H. Padua and V. Majer, “Density and Viscosity of Several Pure and Water-Satu- rated Ionic Liquids,” Green Chemistry., Vol. 8, No. 2, 2006, pp. 172-180. doi:10.1039/b513231b

[31]   P. S. Kulkarni, L. C. Branco, J. G. Crespo, M. C. Nunes, A. Raymundo and C. A. M. Afonso, “Comparison of Physicochemical Properties of New Ionic Lliquids Based on Imidazolium, Quaternary Ammonium, and Guanidinium Cations,” Chemistry―A European Journal, Vol. 13, No. 30, 2007, pp. 8478-8488. doi:10.1002/chem.200700965

[32]   K. R. Seddon, A. Stark and M. Torres, “Influence of Chlo- ride, Water, and Organic Solvents on the Physical Pro- perties of Ionic Liquids,” Pure and Applied Chemistry, Vol. 72, No. 12, 2000, pp. 2275-2287. doi:10.1351/pac200072122275

[33]   P. Bonh?te, A. Dias, N. Papageorgiou, K. Kalyanasunda- ran and M. Gratzel, “Hydrophobic, Highly Conductive Ambient-Temperature Molten Salts,” Inorganic Chemistr, Vol. 35, No. 5, 1996, pp. 1168-1178. doi:10.1021/ic951325x

[34]   R. A. Carpio, L. A. King, R. E. Lindstram, J. C. Nardi and C. L. Hussey, “Density Electric Conductivity, and Viscosity of Several N-alkylpyridinium Halides and Their Mixtures with Aluminium Chloride,” Journal of the Electrochemical Society, Vol. 126, No. 10, 1979, pp. 1644-1650. doi:10.1149/1.2128768

[35]   J. R. Sanders, E. H. Ward and C. L. Hussey, “Aluminium Bromide-1-methyl-3-ethylimidazolium Bromide Ionic Li- quids,” Journal of the Electrochemical Society, Vol. 133, No. 2, 1986, pp. 325-330. doi:10.1149/1.2108570

[36]   O. O. Okoturo and T. J. Vander-Noot, “Temperature De- pendence of Viscosity for Room Temperature Ionic Liquids”, Journal of the Electrochemical Society, Vol. 568, No. 1-2, 2004, pp. 167-181.

[37]   Z. B. Zhou, H. Matsumoto and K. Tatsumi, “Low-Melt- ing, Low-Viscous, Hydrophobic Ionic Liquids: 1-Aalkyl (alkylether)-3-methylimidazolium Perfluoroalkyl-tri-fluo- roborate,” Chemistry―A European Journal, Vol. 10, No. 24, 2004, pp. 6581-6591. doi:10.1002/chem.200400533