JBiSE  Vol.2 No.7 , November 2009
Design of low-offset low-power CMOS amplifier for biosensor application
ABSTRACT
A compacted and low-offset low-power CMOS am- plifier for biosensor application is presented in this paper. It includes a low offset Op-Amp and a high precision current reference. With a novel continuous-time DC offset rejection scheme, the IC achieves lower offset voltage and lower power consumption compared to previous designs. This configuration rejects large DC offset and drift that exist at the skin-electrode interface without the need of external components. The proposed amplifier has been implemented in SMIC 0.18-μm 1P6M CMOS technol-ogy, with an active silicon area of 100 μm by 120 μm. The back-annotated simulation results demonstrated the circuit features the systematic offset voltage less than 80 μV, the offset drift about 0.27 μV/℃ for temperature ranging from –30℃ to 100℃ and the total power dissipation consumed as low as 37.8 μW from a 1.8 V single supply. It dedicated to monitor low amplitude biomedical signals recording.

Cite this paper
nullZhang, J. , Wang, L. and Li, B. (2009) Design of low-offset low-power CMOS amplifier for biosensor application. Journal of Biomedical Science and Engineering, 2, 538-542. doi: 10.4236/jbise.2009.27078.
References
[1]   Yazicioglu, R. F., Merken, P., and Van Hoof, C., (2005) Inte-grated low-power 24-channel EEG front-end, Elec- tronics Letters, 41(8), 457–458.

[2]   Webster, J. G., (1998) Medical instrumentation: Applica- tion and design, 3rd Edition, Wiley, NewYork.

[3]   Chan, C. H., Wills, J., LaCoss, J., Granacki, J. J., and Choma, J., (2007) A novel variable-gain micro-power band-pass auto-zeroing CMOS Amplifier, IEEE Interna- tional Sympo-sium Circuits and Systems, 337–340,.

[4]   Permanod, B., Silawan, N., and Toumazou, C., (2007) Drift reduction in Ion-sensitive FETs using correlated double sam-pling, IET Electronics Letter, 43(16), 857– 859.

[5]   Panitantum, N. and Wongkomet, N., (2002) A low-offset high-CMRR switched-capacitor instrumentation ampli- fier for data acquisition applications, Circuits and Sys- tems, 1, 339–342.

[6]   Hanasusanto, G. A. and Zheng, Y. J., (2007) A chopper stabilized pre-amplifier for biomedical signal acquisition, International Symposium on Integrated Circuits, 200–203.

[7]   Li, L., (2007) High gain low power operational amplifier de-sign and compensation techniques, A Dissertation of depart-ment of Electrical and Computer Engineering, Brigham Young University.

[8]   Teo, T. H., Lim, G. K., David, D. S., Tan, K. H., Gopalakrish-nan, P. K., kHz-s.l, and Singh, R., (2007) Ultra low-power sensor node for wireless health monitoring system, IEEE In-ternational Symposium on Circuits and Systems, 2363–2366.

[9]   Yoo, C. A. and Park, J., (2007) CMOS current reference with supply and temperature compensation, Electronics Letters, 43(25), 1422–1424.

[10]   Chan, P. K., Siek, L., Tay, H. C., and Su, J. H., (2000) A low-offset class-AB CMOS operational amplifier, in Proceed-ings, The 2000 IEEE International Symposium on Circuits and Systems, 3, 455–458.

[11]   Holzmann, P. J., Wiegerink, R. J., Gierkink, S. L. J., Wassenaar, R. F., and Stroet, P., (1996) A low-offset low-voltage CMOS op amp with rail-to-rail input and output ranges, 1996 IEEE In-ternational Symposium on Circuits and Systems, 1, 179–182.

[12]   Lim, K. T., Kim, S. J., and Kwon, O. K., (2003) The OP-amplifier with offset cancellation circuit, Electron Devices and Solid-State Circuits, 2003 IEEE Conference, 445–447.

[13]   Gosselin, B., Ayoub, A. E., and Sawan, M., (2006) A low-power bioamplifier with a new active DC rejection scheme, in Proceedings, IEEE International Symposium on Circuits and System, 2185–2188.

[14]   Hogervorst, R., Tero, J. P., Eschauzier, R. G. H., and Huijsing, J. H., (1994) A compact power-efficient 3 V CMOS rail-to-rail input/output operational amplifier for VLSI cell libraries, Solid-State Circuits, IEEE Journal, 29(12), 1505–1513.

[15]   Christopher Saint and Judy Saint, IC Mask Design: Essential Layout Techniques, McGraw-Hill Professional, 2002.

[16]   Mohseni, P. and Najafi, K., (2004) A fully integrated neural recording amplifier with DC input stabilization, Biomedical Engineering, IEEE Transactions, 51(5), 832– 837.

[17]   Maryam, S. B., Rakesh, K. L., and Dinesh, K., (2005) A low-power and compact analog CMOS processing chip for portable ECG recorders, Asian Solid-State Circuits Conference, 473–476.

[18]   Putra, A., Teo, T. H., and Rajinder, S., (2007) Ultra low-power low-voltage integrated preamplifier using class-AB op-amp for biomedical sensor application, In- ternational Symposium on Integrated Circuits, 216–219

 
 
Top