JTTs  Vol.1 No.4 , October 2011
Lethe@-Udr1 Passenger Sedan Final Proposed Configuration
Author(s) Roberto Capata
For years the interest of the UDR1 researcher group has been focused on the development of a Hybrid Series (HS) vehicle, different from the standard one, using a Gas Turbine (GT) set as a thermal engine. The reason of this choice resides in the opportunity to reduce weight and dimension, in comparison to a traditional In- ternal Combustion Engine (ICE). It’s not possible to use the GT engine directly for the vehicle traction, so the UDR1 HS configuration shows the GT set connected with the electric generator only. The result is that the traction is pure electric. Many efforts are spent in the definition of a generic scientific method to define the correct ratio HD (the Hybridization Degree) between the installed power of the battery pack and that of the GT electric generator which simultaneously guarantee the main life for the battery package and the ca- pacity of the vehicle to complete a common mission (about 15 km - 30 km) without lack of energy or stop. This paper reports all studies carried out and finally proposes a possible configuration (weight distribution, VMU logic control, GT dimensions and power rate, battery package characteristics and so on) for mid term solution in the Italian transport system.

Cite this paper
nullCapata, R. (2011) Lethe@-Udr1 Passenger Sedan Final Proposed Configuration. Journal of Transportation Technologies, 1, 83-93. doi: 10.4236/jtts.2011.14011.
[1]   R. Capata, E. Cioffarelli and E. Sciubba, “A Gas Turbine-Based Hybrid Vehicle-Part II: Technological and Configuration Issues,” Journal of Engineering for Gas Turbines and Power, Vol. 125, No. 2, July 2003, pp. 777-782.

[2]   R. Capata and E. Sciubba, “An Innovative Solution for Suburban Railroad Transportation: The Gas Turbine Hybrid Train,” International Journal of Thermodynamics, Vol. 8, No. 1, March 2005, pp. 55-66.

[3]   R. Capata and E. Sciubba, “The Concept of the Gas Turbine-Based Hybrid Vehicle: System, Design and Configuration Issues,” International Journal of Environmental Research, Vol. 30, 2006, pp. 671-684. doi:10.1002/er.1178

[4]   R. Capata and A. Coccia, “Procedure for the Design of a Hybrid-Series Vehicle at UDR1 and the Hybridization Degree Choice,” Energies, Vol. 3, 2010, pp. 450-461. doi:10.3390/en3030450

[5]   R. Capata and M. Lora, “The Comparative Assessment and Selection of an “Optimal” Configuration for a Gas Turbine-Based Hybrid City Car,” Journal of Engineering for Gas Turbines and Power, Vol. 129, No. 2, 2008, pp. 107-117.

[6]   E. Cioffarelli and E Sciubba, “A New Type of Gas Turbine Based-Hybrid Propulsion System-Part I: Concept Development, Definition of Mission Parameters and Preliminary Sizing,” Proceedings of AES/ASME Winter Meeting,” Orlando FL, 2000.

[7]   Audi site, 2011 http://www.audi-club.dk.

[8]   G. Pede, ENEA (National Agency of Energy and Environment), Personal Communication, 2009.

[9]   Automobile Club Italy, 2011 http://www.aci.it.