ENG  Vol.3 No.10 , October 2011
Reverse Engineering Closely-Spaced Free-Form Shapes for a Fabric-Over-Body Model
Abstract: This paper presents a case study of reverse engineering closely-spaced free-form shapes. The raw point cloud data captured from a body scanner was processed to filter most noise and redundancy. They were used to generate meshes through triangulation of points. Upon removal of inconsistencies resulted from residual noise, the clean-up meshes were then used to reconstruct the free-form surfaces that represented a fabric layer and a human body surface. The solid produced between these two surfaces is the fabric-over-body model. It helped generate a FEA (finite-element analysis) mesh with quality checks, such as distortion and stretch, were performed for all the meshed tetrahedral elements. The purpose is to prepare a FEA-ready model for future CFD (computational fluid dynamics) analysis.
Cite this paper: nullD. Chen, A. Ravindran and P. Vishwabrahmanasaraf, "Reverse Engineering Closely-Spaced Free-Form Shapes for a Fabric-Over-Body Model," Engineering, Vol. 3 No. 10, 2011, pp. 1022-1029. doi: 10.4236/eng.2011.310127.

[1]   J. Bohm and M. Pateraki, “From Point Samples to Sur-faces—On Meshing and Alternatives,” Image Engineering and Vision Metrology’ Proceedings of the ISPRS Commission V Symposium, Dresden, 25-27 September 2006.

[2]   K. Soni, D. Chen and T. Lerch, “Parametrerization of Prismatic Shapes and Re-construction of Free-Form Shapes in Reverse Engineering,” International Journal of Advanced Manufacturing Technology, Vol. 41, No. 9, 2009, pp. 948-959. doi:10.1007/s00170-008-1550-1

[3]   D. Rogers, “An Introduction to NURBS with Historical Perspective,” Morgan Kaufmann Publishers, San Francisco, 2001.

[4]   A. Wulamu, M. Goetting and D, Zeckzer, “Approximation of NURBS Curves and Surfaces Using Adaptive Equidistant Parameteriza-tions,” Tsinghua Science & Technology, Vol. 10, No. 3, 2005, pp. 316-322. doi:10.1016/S1007-0214(05)70075-4

[5]   Dassault Systems, CATIA V5, 2011.

[6]   Siemens NX, I-DEAS, 2011.

[7]   Vitronic, VITUS/Smart 3D Body Scanner, 2011.

[8], Charge Coupled Device Camera, 2011.,,sid5_gci295633,00.html

[9]   T. Grimm, “Reverse Engineering: Magic, Mystique, and Myth,” Desktop Engineering, Vol. 10, No. 12, 2005, pp. 32-37.

[10]   Rapidform, Intelligent Registration, 2011.

[11]   D. Gibson, “Parametric Feature Recognition and Surface Construction from Digital Point Cloud Scans of Mechanical Parts,” Thesis, University of Oklahoma, Norman, 2004.

[12]   P. Waterman, “3D Data at Work,” Desktop Engineering, Vol. 9, No. 11, 2004, pp. P18-P23.

[13]   J. Cabello, “Toward Quality Surface Meshing,” Proceedings of 12th Meshing International Roundtable, Santa Fe, 14-17 September 2003, pp. 201-213.

[14]   A. Fabri, P. Al-liez and M. Yvinec, “Triangulations and Mesh Generation in Computer Geometry Algorithms Library,” CGAL Day of the 10th Anniversary of LIAMA, Beijing, 19 January 2007.

[15]   S. Oudot, “Delaunay Triangulation,” Course Handouts, Stanford University, Palo Alto, 2011.

[16]   L. H. Beni, M. A. Mostafavi, J. Pouliot and R. Therrien, “Developing an Adaptive Topological Tessel-lation for 3D Modeling in Geosciences,” Geomatica, Vol. 63, No. 4, 2009, pp. 419-431.

[17]   F. Aurenhammer and R. Klein, “Handbook of Computational Geometry,” Amsterdam, 2000.

[18]   L. Chen and J. Xu, “Optimal Delaunay Triangulation,” Journal of Computational Mathematics, Vol. 22, No. 2, 2004, pp. 299-308.

[19]   M. Lawry, “I-DEAS Student Guide,” 2nd Edition, McGraw-Hill, New York, 2004.