NJGC  Vol.1 No.3 , October 2011
A New Way to Improve Thermal Capacities of Lubricants for the Manufacture of Flint Glass Perfume Bottles: Part A—How to Combine Thermal Analysis and Physico-Chemical Observations at the Glass/Punch Interface
Abstract: In the hollow glass industry, the success of the forming process depends on controlling the thermal exchange at the glass/mold interface to prevent defects on the glass surface. In the manufacturing process for luxury perfume bottles, the current practice is to deposit a resin film on the inner faces of the mold at the beginning of the production process and regularly swab the mold with a lubricating paste. This study presents a new way to analyze the impact of lubrica- tion on glass/tool thermal exchanges. The TEMPO Laboratory (Valenciennes, France) has an experimental Glass/Tool Interaction (GTI) platform, which is a reduced-scale production unit that allows researchers to reproduce the pressing cycle conditions encountered in the glass industry. To complete the analysis of the thermal exchange at the glass/tool interface, the BCR Center (Mons, Belgium) took physico-chemical measurements on the produced glass samples after the trials on the GTI platform. Part A presents the experimental conditions on the GTI platform and the thermal analy- sis with this platform for the first case of flint glass pressing cycles with a punch swabbed with a lubricating paste de- veloped by our partner, SOGELUB® Special Lubricants Company (Marquain, Belgium). The analysis of the phys- ico-chemical changes on the pressed glass samples produced with the swabbed punch were completed with our obser- vations using a Scanning Electron Microscope (SEM) with Energy Dispersive Spectroscopy (EDS).
Cite this paper: nullP. Moreau, D. Lochegnies, C. Kermel, J. Carpentier and H. Vivier, "A New Way to Improve Thermal Capacities of Lubricants for the Manufacture of Flint Glass Perfume Bottles: Part A—How to Combine Thermal Analysis and Physico-Chemical Observations at the Glass/Punch Interface," New Journal of Glass and Ceramics, Vol. 1 No. 3, 2011, pp. 79-91. doi: 10.4236/njgc.2011.13013.

[1]   C. J. Fellows, F. Shaw, “A Laboratory Investigation of Glass to Mould Heat Transfer during Pressing,” Glass Technology, Vol. 19, No. 1, 1978, pp. 4-9.

[2]   D. H?hne, B. Pitschel, M. Merkwitz and R. L?big, “Measurement and Mathematical Modelling of the Heat Transfer in the Glass Forming Process, in consideration of the Heat Transfer Coefficients and Radiation Influences,” Glass Science and Technology, Vol. 76, No. 6, 2003, pp. 309-317.

[3]   P. Moreau, D. Lochegnies, S. Gregoire and J. César de Sa, “Analysis of Lubrication in Glass Blowing : Heat Transfer Measurements and Impact on Forming,” Glass Technology: European Journal of Glass Science and Technology, Part A, Vol. 49, No. 1, 2008, pp. 8-16.

[4]   W. C. Dowling, H. V. Fairbanks and W. A. Koehler, “A Study of the Effect of Lubricants on the Adherence of Molten Glass to Heated Metals,” Journal of the American Ceramic Society, Vol. 33, No. 9, 1950, pp. 269-273. doi:10.1111/j.1151-2916.1950.tb12797.x

[5]   P. Manns, W. D?ll, G. Kleer, “Glass in Contact with Mould Materials for Container Production,” Glastech Ber Glass Science and Technology, Vol. 68, No. 12, 1995, pp. 389-399.

[6]   D. Rieser, G. Spie? and P. Manns, “Investigations on Glass-to-Mold Sticking in the Hot Forming Process,” Journal of Non-Crystalline Solids, Vol. 354, 2008, pp. 1393-1397.

[7]   J. Pech, G. Berthomé, M. Jeymond and N. Eustathopoulos, “Influence of Glass/Mould Interfaces on Sticking,” Glass Science Technology, Vol. 78, No. 2, 2005, pp. 54-62.

[8]   K. D. Fischbach, K. Georgiadis, F. Wang, O. Dambon, F. Klocke, Y. Chen and A. Y. Yi, “Investigation of the Ef-fects of Process Parameters on the Glass-to-Mold Sticking Force during Precision Glass Molding,” Surface and Coatings Technology, Vol. 205, 2010, pp. 312-319. doi:10.1016/j.surfcoat.2010.06.049

[9]   M. Falipou, C. Donnet, “Sticking Temperature Investiga- tions of Glass/Metal contacts—Determination of Influ- encing Parameters,” Glastech Ber Glass Science and Technology, Vol. 70, No. 5, 1997, pp. 137-145.

[10]   S. Gregoire, J. César de Sa, P. Moreau and D. Lochegnies, “Modelling of Heat Transfer at Glass/Mould Interface in Press and Blow Forming Process,” Computers and Struc-tures, Vol. 85, 2007, pp. 1194-1205. doi:10.1016/j.compstruc.2006.11.023

[11]   R. Guilbaut, D. Lochegnies, P. Moreau, “In and Outside Vision of Glass Blow and Blow,” In: D. Lochegnies and P. Moreau, Eds., Proceedings of the 2nd International Colloquium Modelling of Glass Forming and Tempering, Valenciennes, France, Presses Universitaires de Valen-ciennes, 23-25 January, 2002, pp. 57-64.

[12]   H. Zhou and D. Li, “Mold Cooling Simulation of the Pressing Process in TV Panel Production,” Simulation Modelling Practice and Theory, Vol. 13, 2005, pp. 273-285. doi:10.1016/j.simpat.2004.11.006