MSCE  Vol.4 No.12 , December 2016
Preparation and Characterization of Axial Gradient Silicon Carbide Fibers with Sinusoidal Electrical Resistivity
ABSTRACT
Two types of silicon carbide fibers with sinusoidal electrical resistivity were prepared by using different pyrolysis technology. The relationship between the microstructure and the electrical resistivity of these fibers was investigated and compared. The results indicated that carbon layer was the main conductive phase in the SiC fibers obtained by means of one step pyrolysis, whereas a free carbon phase governed the conductivity of the SiC fibers prepared through two step pyrolysis mode.

Cite this paper
Hu, T. , Li, X. , Pu, W. and Xia, Z. (2016) Preparation and Characterization of Axial Gradient Silicon Carbide Fibers with Sinusoidal Electrical Resistivity. Journal of Materials Science and Chemical Engineering, 4, 58-64. doi: 10.4236/msce.2016.412007.
References
[1]   Muto, N. (1990) Infrared Detection by Si-Ti-C-O Fibers. Journal of Amrican Ceramic Society, 73, 443. https://doi.org/10.1111/j.1151-2916.1990.tb06533.x

[2]   Narisawa, M., Okamura, K. and Itoi, Y. (1995) Electrical Resistivity of Si-Ti-C-O Fibres after Rapid Heat Treatment. Journal of Material Science, 30, 3401-3406. https://doi.org/10.1007/BF00349886

[3]   Ishikawa, T. (1994) Recent Developments of the SiC fiber Nicalon and Its Composites, Including Properties of the SiC fiber Hi-Nicalon for Ultra-High Temperature. Composite Science and Technology, 51, 135-144.

[4]   Yamamura, T., Ishikawa, T., Shibuya, M., Hisayuki, T. and Okamura, K. (1988) Development of a New Continuous Si-Ti-C-O Fibre Using an Organometallic Polymer Precursor. Journal of Material Science, 23, 2589-2594. https://doi.org/10.1007/BF01111919

[5]   Kagawa, Y., Matsumura, K., Iba, H. and Imahashi, Y. (2007) Potential of Short Si-Ti-C-O Fiber-Reinforced Epoxy Matrix Composite as Electromagnetic Wave Absorbing Material. Journal of Material Science, 42, 1116-1121. https://doi.org/10.1007/s10853-006-1437-1

[6]   Yamamura, T., Ishikawa, T. and Shibuya, M. (1992) Electromagnetic Wave Absorbing Material, USA, Patent, 5094907.

[7]   Tan, E., Kagawa, Y. and Dericioglu, A.F. (2009) Electromagnetic Wave Absorption Potential of SiC-Based Ceramic Woven Fabrics in the GHz Range. Journal of Material Science, 44, 1172-1179. https://doi.org/10.1007/s10853-009-3257-6

[8]   Ishikawa, T., Ichikawa, H., Imai, Y., Hayase, T. and Nagata, Y. (1985) Electromagnetic Wave Absorbers of Silicon Carbide Fibers, USA, Patent, 4507354.

[9]   Ishikawa, T., Yamaoka, H., Harada, Y., Fujii, T. and Nagasawa, T. (2002) A General Process for in Situ Formation of Functional Surface Layers on Ceramics. Nature, 416, 64-67. https://doi.org/10.1038/416064a

[10]   Yajima, S., Okamura, K., Josaburo, H. and Mamoru, O. (1976) Synthesis of Continuous SiC Fibers with High Tensile Strength. Journal of Amrican Ceramic Society, 59, 324-427. https://doi.org/10.1111/j.1151-2916.1976.tb10975.x

[11]   Bouillon, E., Mocaer, D., Villeneuve, J.F., Pailler, R., Naslain, R., Monthioux, M., Oberlin, A., Guimon, C. and Pfister, G. (1991) Composition-Microstructure-Property Relationships in Ceramic Monofilaments Resulting from the Pyrolysis of a Polycarbosilane Precursor at 800 to 1400°C. Journal of Material Science, 26, 1517-1530. https://doi.org/10.1007/BF00544661

 
 
Top