WSN  Vol.1 No.3 , October 2009
Reconfigure ZigBee Network Based on System Design
ABSTRACT
This article analyses key technology used by network layer based on ZigBee technology. Then a reconfigure network as well as its strategy of forming network and distributing node is given. The simulation proved that the stability of reconfigure network and the ability of transmitting pass through obstacle are better than tradi-tional network; it has an active significance for shorter delay because of the flexible of the improved forming network strategy.

Cite this paper
nullY. XU, S. QIU and M. HOU, "Reconfigure ZigBee Network Based on System Design," Wireless Sensor Network, Vol. 1 No. 3, 2009, pp. 206-211. doi: 10.4236/wsn.2009.13027.
References
[1]   IEEE Standards 802.15.4TM-2003, Wireless medium access control (MAC)and physical layer(PHY) specifications for low-rate wireless personal area networks (LR-WPANs) [S].

[2]   ZigBee Alliance, ZigBee Specification, ZigBee Document 053474r06 Version 1.0 [S], 2004.

[3]   ZigBee Alliance, ZigBee Specification Version 2.0, December 2006, http://www.zigbee.org.

[4]   C. Perkins, E. Belding-Royer, and S.Das, RFC 3561, “Ad hoe on demand distance vector (AODV) Routing [S],” July 2003.

[5]   I. D. Chakeres and K. B. Luke, AODVjr, AODV simplified [J], ACMSIG-MOBILE Mobile Computing and Communications Review, Vol. 6, No. 3, pp. 100–101, 2002.

[6]   L. Kleinrock and F. A. Tobagi, “Packet switching in radio channels: Part 1-Carrier sense multiple-access modes and their throughput-delay characteristics,” IEEE Transactions on Communications, Vol. COM-23, pp. 1400–1416, December 1975.

 
 
Top