Back
 OALibJ  Vol.2 No.12 , December 2015
Utilizing Mine Tailings as Substitute Construction Material: The Use of Waste Materials in Roller Compacted Concrete
Abstract: Mine tailings (MT) have been used in previous studies as substitute construction material to recycle waste products, especially in hollow blocks and bricks production and as masonry mortar. This study investigated the use of Philex copper-gold mine tailings (PCGMT) in roller compacted concrete (RCC) production, a mining waste material consisting of finely grinded siliceous particles was obtained from Tailings Pond number 2 (TP2) of a Philippine copper and gold mining company. A comprehensive experimental program was conducted to investigate the comparative compressive strength of RCC containing Porac sand (RCCPS) and RCC with copper-gold mine tailings (RCCCGMT), and the durability of RCC with copper-gold mine tailings and fly-ash (RCCCGMTFA). Varying mixtures of RCCPS and RCCCGMT with very low, low, medium, and high cement contents were casted and tested. The compressive strength attained at 28 days by RCCPS and RCCCGMT ranges from 17 to 37 Mega Pascal (MPa) and 17 to 28 Mpa, respectively. The obtained values indicate that the latter requires greater amount of cement and the mixtures with compressive strength values greater than 25 Mpa are acceptable for concrete pavement use. The durability of RCCCGMTFA with medium cement content was evaluated by subjecting the specimens to an alternate wetting and drying cycles. After 15 cycles, a remaining strength of 18.7 MPa was obtained which indicated that it could endure stresses due to weather changes in the Philippines. Results show that PCGMT in TP2 are viable sand or fine aggregates substitute in RCC.
Cite this paper: Gopez, R. (2015) Utilizing Mine Tailings as Substitute Construction Material: The Use of Waste Materials in Roller Compacted Concrete. Open Access Library Journal, 2, 1-9. doi: 10.4236/oalib.1102199.
References

[1]   Environment Law Alliance Worldwide (2010) Guidebook for Evaluating Mining Project EIAs, Chapter 1. 5-6.
http://www.elaw.org/files/mining-eia-guidebook/Chapter1.pdf

[2]   (2001) Summary of Ten-Year Production of Mine Tailings from Selected Large-Scale Mining Corporations in the Philippines. Unpublished Report, Department of Environment and Natural Resources (DENR), Mines and Geosciences Bureau (MGB), Mine Environmental Section.
https://www.mgb.gov.ph

[3]   Dinglasan, R. R. (2012) GMA News.
http://www.gmanetwork.com/news/story/281988/news/nation/philex-spill-biggest-mining-disaster-in-phl-surpassing-marcopper-denr#sthash.CUOu1cyV.dpuf

[4]   Chronology of Tailings Dam Failures in the Philippines (1982-2007).
http://www.piplinks.org/system/files/Tailings+dam+failures+(070722).doc

[5]   Nanni, A., Ludwig, D. and Shoenberger, J. (1996) Roller Compacted Concrete for Highway Pavements. Concrete International, 18, 33-38.

[6]   ACI 207.5R-11 (2011) Roller Compacted Concrete. American Concrete Institute (ACI), Farminton Hills.

[7]   Ahmari, S. and Zhang, L.Y. (2012) Production of Eco-Friendly Bricks from Copper Mine Tailings through Geopolymerization. Construction and Building Materials, 29, 323-331.
http://dx.doi.org/10.1016/j.conbuildmat.2011.10.048

[8]   Stevens, A.T. (1995) Student Makes Concrete Blocks from Mine Tailings.
http://www.montana.edu/cpa/news/wwwpb-archives/ag/blocks.html

[9]   Jorillo Jr., P.A., et al. (2000) Study on the Utilization Technologies of Copper Mine Tailings. Unpublished Report to JSPS Core University Program. Integrated Research and Training Center, Technological University of the Philippines, Manila.

[10]   Mendoza, V.A. (1999) Development of Mix Design Tables and Charts for Structural Lightweight Concrete using Indigenous Pumice Aggregates. Unpublished MSCE Thesis, Technological University of the Philippines, Manila.

[11]   Metha, P.K. and Monteiro, P.J. (1993) Concrete: Structure, Properties, and Materials. 2nd Edition, Prentice Hall, Englewood Cliff.

[12]   ACI 232.2R-03 (2003) Use of Fly Ash in Concrete. American Concrete Institute (ACI), Farminton Hills.

[13]   Gambhir, M.L. (1986) Concrete Technology. Tata McGraw Hill, New Delhi.

[14]   Neville, A.M. (1983) Properties of Concrete. 3rd Edition, Pitman Publishing Inc., Marshfield.

[15]   Federal Highway Administration (1991) Standard Specifications for Construction of Roads and Bridges on Federal Highway Projects. United States Department of Transportation, Washington DC.

 
 
Top