Back
 ENG  Vol.3 No.8 , August 2011
Diagnosis on Surface Failure in Gear Equipment Using Time - Frequency Domain Analysis
Abstract: In order to make more progress in the gear performance, it is important to evaluate the gear dynamics more precisely, since gear is a main machine element in motion and power transmissions. For preventing the unexpected failure in mechanical systems, a large amount of work has been carried out based on a statistical model developed by Lundberg and Palmgren [1] with reliability models using the classical fatigue theory. However, most of these works did not consider the operating conditions of machine during the fatigue process.
Cite this paper: nullY. Ohue, T. Kounou and K. Yazama, "Diagnosis on Surface Failure in Gear Equipment Using Time - Frequency Domain Analysis," Engineering, Vol. 3 No. 8, 2011, pp. 851-858. doi: 10.4236/eng.2011.38104.
References

[1]   G. Lundberg and A. Palmgren, “Dynamic Capacity of Rolling Bearings,” ACTA, Polytechnica, Mechanical Engineering Se-ries, Vol. 1, No. 3, 1947, p. 7.

[2]   C. K. Chui, “Introduction to Wavelet,” Academic Press, London, 1992.

[3]   S. Mallat, “A Wavelet Tour of Signal Processing,” Academic Press, London, 1998.

[4]   W. J. Staszewski and G. R. Tomlinson, “Application of the Wavelet Transform to Fault Detection in a Spur Gear,” Mechanical Systems and Signal Processing, Vol. 8, No. 3, 1994, pp. 289-307. doi:10.1006/mssp.1994.1022

[5]   W. J. Wang and P. D. McFadden, “Application of Wavelets to Gearbox Vibration Signals for Fault Detection,” Journal of Sound and Vibration, Vol. 192, No. 5, 1996, pp. 927-939. doi:10.1006/jsvi.1996.0226

[6]   B. A. Paya, I. I. Esat and M. N. M. Badi, “Artificial Neural Network Based Fault Diagnos-tics of Rotating Machinery Using Wavelet Transforms as a Preprocessor,” Mechanical Systems and Signal Processing, Vol. 11, No. 5, 1997, pp. 751-765. doi:10.1006/mssp.1997.0090

[7]   A. Yoshida and Y. Ohue, “A Study on Diagnosis of Tooth Surface Failure by Wavelet Transform of Dynamic Characteristics,” Proceedings of 5th International Tribology Conference in Australia, Brisbane, 6-9 December 1998, pp. 11-16.

[8]   S. Qian and D. Chen, “Joint Time-Frequency Analysis,” Prentice Hall PTR, 1996.

[9]   Y. Ding, R. L. Reuben and J. A. Steel, “A New Method for Waveform Analysis for Estimating AE Wave Arrival Times Using Wavelet Decomposition,” NDT & E International, Vol. 37, No. 4, 2004, pp. 279-290. doi:10.1016/j.ndteint.2003.10.006

[10]   A. Yosida, Y. Ohue and I. Karasuno, “Surface Failure and Durability of Induc-tion-Hardened Sintered Powder Metal Rollers and Gears with Various Hardened Depths,” Transactions of the ASME, Journal of Mechanical Design, Vol. 116, 1994, pp. 730-737. doi:10.1115/1.2919443

 
 
Top