MSA  Vol.2 No.7 , July 2011
Influence of S Contents on the Hydrogen Blistering and Hydrogen Induced Cracking of A350LF2 Steel
ABSTRACT
In the present work, the effects of chemical compositions on the hydrogen blistering and hydrogen induced cracking of A350LF2 steel with different S contents were studied. Four types of A350LF2 steels were evaluated by immersing samples in H2S-saturated NACE solution. The hydrogen blistering, crack length rate(CLR), crack thickness rate(CTR) and crack sensitivity rate(CSR) were evaluated. The results show that there are many hydrogen blisters on the sample surface with S content of 0.021%, a few on the sample surface with S content of 0.019% and 0.012% and no one on the surface with S content of 0.002%. There were 12, 2 and 1 strips of cracks of longer than 0.3 mm on the evaluated cross sections with S content of 0.021%, 0.019% and 0.012%, respectively. There was no any crack in the sample with 0.002% S. The corrosion rate was also evaluated. The S content has no obvious influence on the corrosion rate.

Cite this paper
nullS. Zheng, C. Chen and L. Chen, "Influence of S Contents on the Hydrogen Blistering and Hydrogen Induced Cracking of A350LF2 Steel," Materials Sciences and Applications, Vol. 2 No. 7, 2011, pp. 917-921. doi: 10.4236/msa.2011.27122.
References
[1]   G. Y. Zhu, J. X. Dai and S. C. Zhang, “Generation Mechanism and Distribution Characters of Hydrogen Sulfide Bearing Gas in China,” Natural Gas Geoscience, Vol. 15, No. 2, 2004, pp.166-171

[2]   P. J. Ferreira, I. M. Robertson and H. K. Birnbaum,“Hydrogen Effects on the Character of Dislocations in High-Purity Aluminum,” Acta Materialia, Vol. 47, No. 10, 1999, pp. 2991-2998. doi:10.1016/S1359-6454(99)00156-1

[3]   G. T. Park, S. U. Koh, H. G. Jung and K. Y. Kim, “Effect of Microstructure on the Hydrogen Rapping Efficiency and Hydrogen Induced Cracking of Pipeline Steel,” Corrosion Science, Vol. 50, No. 7, 2008, pp.1865-1871. doi:10.1016/j.corsci.2008.03.007

[4]   W. K. Kim, S. U. Koh, B. Y. Yang and K. Y. Kim, “Effect of Environmental and Metallurgical Factors on Hydrogen Induced Cracking of HSLA Steels,” Corrosion Science, Vol. 50,No. 12, 2008, pp. 3336-3342. doi:10.1016/j.corsci.2008.09.030

[5]   T. Hara, H. Asahi and H. Ogawa, “Conditions of Hydrogen-Induced Corrosion Occurrence of X65 Grade Line Pipe Steels in Sour Environments,” Corrosion, Vol. 60, No. 12, 2004, pp. 1113-1121. doi:10.5006/1.3299225

[6]   M. A. Lucio-Garcia, J. G. Gonzalez-Rodriguez and M. Casales, “Effect of Heat Treatment on H2S Corrosion of a Micro-Alloyed C-Mn Steel,” Corrosion Science, Vol. 51, No. 10, 2009, pp. 2380-2386. doi:10.1016/j.corsci.2009.06.022

[7]   NACE standard TM0284-03, “Evaluation of Pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking,” NACE International, Huston.

[8]   International standard ISO 15156-2:2003, Petroleum and Natural Gas Industries. Materials for Use in H2S-Containing Environments in Oil and Gas Production-Part 2: Cracking-Resistant Carbon and Low Alloy Steels, and the Use of Cast Irons.

[9]   N. Loukachenko, P. Bourges, K. E. Orie, C. Chauvy and L. Coudreuse, “Recent Experience on Sour Service Resistant Steels Behavior,” NACE Corrosion 2009, Paper No. 09352.

 
 
Top