OJIC  Vol.1 No.2 , July 2011
Synthesis, characterization of a multi-component metal oxide (Al0.88Fe0.67Zn0.28O3) and elimination of As (III) from aqueous solution.
Abstract: The multi-component oxide (Al0.88Fe0.67Zn0.28O3)) surface (abbreviated as MCOS) was prepared to optimize the effectiveness of the elimination of As (III) from aqueous solution. The oxide surface was synthe-sized by co-precipitation method using corresponding metal carbonates. It was characterized by XRD, TGA and DSC. The surface morphology of MCOS was observed in SEM and the elemental analysis was accomplished by EDX. The composition of Al2O3, Fe2O3 & ZnO was 23.6, 39.9 and 20.6 wt% respectively in XRF analysis. The specific surface area was found 389.85 m2 g-1. Batch experiments were performed to remove As (III) from aqueous solution considering various parameters such as effect of pH, contact time, initial arsenic concentration, temperature and sor-bent dosage. The maximum sorption capacity of the surface was almost steady from pH 4 to pH 9. Kinetic study shows that As (III) sorption is following second order rate equation with the rate constant of 80×10-2 g mg-1 min-1 at room temperature and this rate was increased with increasing temperature which indicates the sorption was endothermic process. The free energy change, ΔGo was negative which proves that the sorption was spontaneous and thermodynamically favorable. Sorption isotherm was interpreted by Langmuir equation and the maximum sorption capacity of oxide monolayer was 13×10-2 mg g-1.
Cite this paper: nullSubhan, M. , Monim, S. , Bhuiyan, M. , Chowdhury, A. , Islam, M. and Hoque, M. (2011) Synthesis, characterization of a multi-component metal oxide (Al0.88Fe0.67Zn0.28O3) and elimination of As (III) from aqueous solution.. Open Journal of Inorganic Chemistry, 1, 9-15. doi: 10.4236/ojic.2011.12002.

[1]   Sivaraman, D. (2004) “Synthesis and Characterization of Thiol-Functionalized Chitosan Based Adsorbents for Arsenic Removal From water,” M. Engg. Thesis, University of Florida, USA.

[2]   Smedly, P. L., and Kinniburgh, D. G. (2002) “A Review of the Source, Behavior and Distribution of arsenic in natural waters,” Appl. Geochem, 17, pp 517-568.

[3]   Hussam, A., and Munir, A. K. M. (2007) “A simple and effective arsenic filter based on composite iron matrix: Development and deployment studies for ground of Bangladesh,” Journal of Environment Science and Health, 42, pp1869-1878.

[4]   Adriano, D. C. (2001) “Trace Elements in Terrestrial Environments: Biogeochemistry, Bioavailability and Risks of Metals,” Springer-Verlag Press, New York, USA.

[5]   Jordao, C.P., Silva, A.C., and Pereira, J. L. (1999) “Chromium contamination in river waters caused by tanneries in the state of Minas Gerais, Brazil,” Quím. Nova, 22, pp 47-52.

[6]   DOE. (1994) “Environmental Quality Standards,” Department of Environment, Government of Bangladesh.

[7]   Su, D. T. (1997) “Assessment of Underground Water Pollution in Bac Bo Delta Plain and Proposal Solutions for Water Source Protection”, Geological Archives, Hanoi.

[8]   Kamal, A. S. M., and Parkpian P. (2002) “Arsenic Contamination in Hizla, Bangladesh: Sources, Effects and Remidies,” Science Asia, 28, pp 181-189.

[9]   Ahmed, M.F. (2003) “Treatment of arsenic contaminated water. In: Arsenic contamination: Bangladesh perspective,” (Ed: Ahmed, F.M.), ITN-Bangladesh.

[10]   Harvey, C.F., Ashfaque, K.N., Yu, W., Badruzzaman, A.B.M., Ali, M.A., Oates, P.M., Michael, H.A., Neumann, R.B., Beckie, R., Islam, S., and Ahmed, M.F. (2006) “Groundwater Dynamics and Arsenic Contamination in Bangladesh,” Chem. Geol., 228, pp 112-136.

[11]   Kim, M.J., Nriagu, J., and Haack, S. (2002) “Arsenic Species and Chemistry in Groundwater of Southeast Michigan,” Environ. Pollut., 120, pp 379-390.

[12]   Kim, M.J., Nriagu, J., and Haack, S., (2002) “Arsenic Behaviour in Newly Drilled Wells,” Chemosphere 52, pp 623-633.

[13]   Wang, S., and Mulligan, C.N. (2006) “Occurrence of Arsenic Contamination in Canada: Sources, Behavior and Distribution,” Sci. Total Environ., 366, pp 701-721.

[14]   Haque, S., and Johannesson, K.H.(2006) “Arsenic concentration and Specification along a Groundwater Flow Path: the Carrizo Sand aquifer, Texas, USA,” Chem. Geol., 228, pp 57-71.

[15]   Mehmood , A., Hayat, R., Wasim, M., and Akhtar, M. S., , J. (2009) Mechanisms of Arsenic Adsorption in Calcareous Soils., Agric. Biol. Sci. 1(1)pp59-65.

[16]   R. De Vitre, N. Belzile and A. Tessier, (1991), Limnol. Oceanogr. 36 pp. 1480.

[17]   A. Jain, K.P. Raven and R.H. Loeppert, (1999), Environ. Sci. Technol. 33 pp. 1179.

[18]   Mamindy-Pajany, Y., Hurel, C., Marmier, N., Roméo, M., (2009) Arsenic adsorption onto hematite and goethite, HComptes Rendus ChimieH, 12, 8, pp. 876-881

[19]   Gomes, J.A.G., Daida, P., Kesmez, M., Weir, M., Moreno, H., Parga, J.R., Irwin G., McWhinney, H., Grady, T., Peterson E. and Cocke, D.L.,(2007)Arsenic removal by electrocoagulation using combined Al–Fe electrode system and characterization of products, HJournal of Hazardous MaterialsH H139, 2H, pp. 220-231.

[20]   Bagheri-Mohagheghi, M.M., Shahtahmasebi, N., Mozafari, E., and Shokooh-Saremi, M. (2009)“Effect of the synthesis route on the structural properties and shape of the indium oxide (In2O3) nano-particles,” Physica E, 41, pp 1757-1762.

[21]   WHO. (2003) Development of Regional Policy and Guidelines for Arsenic Testing, Report of an Inter country Workshop, World Health Organization.Kolkata, p12

[22]   Swash, P., (2003)Field Evaluation of the Arsenator Royal School ofMines, Imperial College, UK.

[23]   Sankaramakrishnan, N, Chauhan, D, Nickson, R.T., Tripathi, R.M, Liyengar, N. (2008) Evaluation of two commercial field test kits used for screening of groundwater for arsenic in Northern India; Science of the Total Environment, 401 pp.162-167

[24]   Shriram Institute for Industrial Research. (2006) Evaluation of Water Quality Monitoring and Purification Products under long term agreement (Performance Evaluation of Arsenator); Project No. ENV 388.

[25]   BGS (British Geological Survey and Bangladesh Department of Public Health Engineering). (2001) Arsenic Contamination of Ground Water in Bangladesh (four volumes). British GeologicalSurvey.Available:

[26]   Haron, M.J., and Shiah, L.L. (2006) “Sorption of Arsenic(V) by Titanium Oxide loaded Poly(Hydroxamic acid) Resin,” The Malaysian Journal of Analytical Sciences 2, pp261-268.

[27]   Zhu, L., Ren, X., and Yu, S. (1998) “Use of Cetyltrimethylammonium Bromide-bentonite to Remove Organic Contaminates of Varing Polar Character from Water,” Environ. Sci.

[28]   Technol, 32, pp 3374. Hue, J.I., Song, D.I., and Jeon, Y.W. (2000) “Sorption of Phenols from Aqueous Solution onto Organically Modified Montmorillonite and Applications of Dual-model Sorption Model” Sep. Sci. Technol, 35, pp 243.

[29]   [29] Rauf, M. A., Hasany, S. M., Ikram, M., and Din, N. (1995) “Adsorption Studies of Arsenic on Manganese Dioxide Using Radiometric Technique,” Ads. Sci. Technol, 12, pp 93-100.

[30]   Oliveira, D.Q.L., Goncalves, M., Oliveira, L.C.A., and Guilherme, L.R.G. (2008) Removal of As(V) and Cr(VI) from aqueous solutions Using Solid Waste from Leather Industry, Journal of Hazardous Materials. Vol.151, No.1, pp 280-284.

[31]   Mishra, D. and Farrell, J., (2005)Evaluation of Mixed Valent Iron Oxides as Reactive Adsorbents for Arsenic Removal, Environ. Sci. Technol., 39, 9689-9694.