Back
 EPE  Vol.3 No.3 , July 2011
Theoretical and Numerical Analysis of the Mechanical Erosion in Steam Turbine Blades. Part II
F. Rueda Martínez, M. Toledo Velázquez, J. Abugaber Francis, A. A. Rueda Martínez, I. Carvajal Mariscal, J. A. Ortega Herrera, G. Polupan
Abstract: In the low pressure section of the steam turbines the damages are pronounced becoming remarkable in all the stages, since the generation of water liquid microparticles implies the impact on the blades having majors problems of erosion in the last stages by the increase of the humidity. In the first part of this work, the calculation presented of the transonic velocity field for the stream frictionless and the drops in the flow line, on the basis of the frictionless, two-dimensional, stationary, transonic and homogenous flow, give an approximate movement of the droplets and its accumulation on the stator blades, flowing through the steam. In order to understand the causes that originate the erosion on the blades of the last stages in low pressure section of steam turbines, the previous procedure is developed in a code in Fortran and the obtained results of velocity distribution in the output of blades that have flow conditions of wet steam are presented.
Keywords: Numerical Code, Mesh Blade, Erosion Blade, Steam Turbine, Drop Distribution
Cite this paper: nullF. Martínez, M. Velázquez, J. Francis, A. Martínez, I. Mariscal, J. Herrera and G. Polupan, "Theoretical and Numerical Analysis of the Mechanical Erosion in Steam Turbine Blades. Part II," Energy and Power Engineering, Vol. 3 No. 3, 2011, pp. 238-245. doi: 10.4236/epe.2011.33030.
References

[1]   “Informe Final de Pruebas de Evaluación,” Subdirección Técnica, Departamento de Evaluaciones de Procesos, Oficina de Sistemas Térmicos, Octubre 2003.

[2]   M. F. Rueda, V. M. Toledo, S. F. Sánchez and H. J. A. Ortega, “Analysis of Erosion by Nucleation in a Steam Turbine of 300 MW,” The 2nd International Simposium on Energy Engineering, Economics and Policy, Florida, June 2010.

[3]   “Handbook of Engineering Datas”, CTM-VM, CFE, 1980, pp. 39.

[4]   M. F. Rueda, V. M. Toledo, S. F. Sánchez, G. Polupan, M. A. A. Rueda and L. G. Jarquín, “Review of Nucleation Phenomena in Steam Turbines,” V Congreso Internacional de Ingeniería Electromecánica y de Sistemas; MEC100; Instituto Politécnico Nacional; México, D.F., 2008.

[5]   J. B. Young, “Wet Steam Research at Cambridge 1980-1985,” EPRI Workshop on Moisture Nucleation in Steam Turbines, October 1995, pp. 11-13.

 
 
Top