WJNSE  Vol.5 No.4 , December 2015
Energy Efficient Manufacturing of Nanocellulose by Chemo- and Bio-Mechanical Processes: A Review
ABSTRACT
Nanocellulose is a new-age material derived from cellulosic biomass and has large specific surface area, high modulus and highly hydrophilic in nature. It comprises of two structural forms viz., nanofibrillated cellulose (NFC) and nanocrystalline cellulose (NCC). This review provides a critical overview of the recent methods of bio- and chemo-mechanical processes for production of nanocellulose, their energy requirements and their functional properties. More than a dozen of pilot plants/commercial plants are under operation mostly in the developed countries, trying to exploit the potential of nanocellulose as reinforcing agent in paper, films, concrete, rubber, polymer films and so on. The utilization of nanocellulose is restricted mainly due to initial investment involved, high production cost and lack of toxicological information. This review focuses on the current trend and exploration of energy efficient and environment-friendly mechanical methods using pretreatments (both chemical and biological), their feasibility in scaling up and the future scope for expansion of nanocellulose application in diverse fields without impacting the environment. In addition, a nanocellulose quality index is derived to act as a guide for application based screening of nanocellulose production protocols.

Cite this paper
Bharimalla, A. , Deshmukh, S. , Patil, P. and Vigneshwaran, N. (2015) Energy Efficient Manufacturing of Nanocellulose by Chemo- and Bio-Mechanical Processes: A Review. World Journal of Nano Science and Engineering, 5, 204-212. doi: 10.4236/wjnse.2015.54021.
References
[1]   Lavoine, N., Desloges, I., Dufresne, A. and Bras, J. (2012) Microfibrillated Cellulose—Its Barrier Properties and Applications in Cellulosic Materials: A Review. Carbohydrate Polymers, 90, 735-764.
http://dx.doi.org/10.1016/j.carbpol.2012.05.026

[2]   Giri, J. and Adhikari, R. (2013) A Brief Review on Extraction of Nanocellulose and Its Application. BIBECHANA, 9, 7.

[3]   Rebouillat, S. and Pla, F. (2013) State of the Art Manufacturing and Engineering of Nanocellulose: A Review of Available Data and Industrial Applications. Journal of Biomaterials and Nanobiotechnology, 4, 24.
http://dx.doi.org/10.4236/jbnb.2013.42022

[4]   Dufresne, A. (2013) Nanocellulose: A New Ageless Bionanomaterial. Materials Today, 16, 220-227.
http://dx.doi.org/10.1016/j.mattod.2013.06.004

[5]   Klemm, D., Kramer, F., Moritz, S., Lindstrom, T., Ankerfors, M., Gray, D., et al. (2011) Nanocelluloses: A New Family of Nature-Based Materials. Angewandte Chemie International Edition, 50, 5438-5466.
http://dx.doi.org/10.1002/anie.201001273

[6]   Isogai, A., Saito, T. and Fukuzumi, H. (2011) TEMPO-Oxidized Cellulose Nanofibers. Nanoscale, 3, 71-85.
http://dx.doi.org/10.1039/C0NR00583E

[7]   Abdul Khalil, H.P.S., Davoudpour, Y., Islam, M.N., Mustapha, A., Sudesh, K., Dungani, R., et al. (2014) Production and Modification of Nanofibrillated Cellulose Using Various Mechanical Processes: A Review. Carbohydrate Polymers, 99, 649-665.
http://dx.doi.org/10.1016/j.carbpol.2013.08.069

[8]   Siró, I. and Plackett, D. (2010) Microfibrillated Cellulose and New Nanocomposite Materials: A Review. Cellulose, 17, 459-494.
http://dx.doi.org/10.1007/s10570-010-9405-y

[9]   Abdul Khalil, H.P.S., Bhat, A.H. and Ireana Yusra, A.F. (2012) Green Composites from Sustainable Cellulose Nanofibrils: A Review. Carbohydrate Polymers, 87, 963-979.
http://dx.doi.org/10.1016/j.carbpol.2011.08.078

[10]   Azizi Samir, M.A., Alloin, F. and Dufresne, A. (2005) Review of Recent Research into Cellulosic Whiskers, Their Properties and Their Application in Nanocomposite Field. Biomacromolecules, 6, 612-626.
http://dx.doi.org/10.1021/bm0493685

[11]   Lagerwall, J.P.F., Schutz, C., Salajkova, M., Noh, J., Park, J.H., Scalia, G., et al. (2014) Cellulose Nanocrystal-Based Materials: From Liquid Crystal Self-Assembly and Glass Formation to Multifunctional Thin Films. NPG Asia Materials, 6, e80.
http://dx.doi.org/10.1038/am.2013.69

[12]   Aspler, J., Bouchard, J., Hamad, W., Berry, R., Beck, S., Drolet, F., et al. (2013) Review of Nanocellulosic Products and Their Applications. In: Dufresne, A., Thomas, S. and Pothen, L.A., Eds., Biopolymer Nanocomposites: Processing, Properties, and Applications, John Wiley & Sons, Inc., Hoboken, 461-508.
http://dx.doi.org/10.1002/9781118609958.ch20

[13]   Spence, K., Habibi, Y. and Dufresne, A. (2011) Nanocellulose-Based Composites. In: Kalia, S., Kaith, B.S. and Kaur, I., Eds., Cellulose Fibers: Bio- and Nano-Polymer Composites, Springer, Berlin, 179-213.
http://dx.doi.org/10.1007/978-3-642-17370-7_7

[14]   Dufresne, A. (2012) Nanocellulose: From Nature to High Performance Tailored Materials. De Gruyter, Berlin.
http://dx.doi.org/10.1515/9783110254600

[15]   Surhone, L.M., Tennoe, M.T. and Henssonow, S.F. (2011) Nanocellulose. Betascript Publishing, Beau-Bassin.

[16]   Charreau, H., Foresti, M.L. and Vazquez, A. (2013) Nanocellulose Patents Trends: A Comprehensive Review on Patents on Cellulose Nanocrystals, Microfibrillated and Bacterial Cellulose. Recent Patents on Nanotechnology, 7, 56-80.
http://dx.doi.org/10.2174/187221013804484854

[17]   Duran, N., Lemes, A.P. and Seabra, A.B. (2012) Review of Cellulose Nanocrystals Patents: Preparation, Composites and General Applications. Recent Patents on Nanotechnology, 6, 16-28.
http://dx.doi.org/10.2174/187221012798109255

[18]   Payen, A. (1838) Mémoire sur la composition du tissu propre des plantes et du ligneux. (Memoir on the composition of the tissue of plants and of woody [material]). Comptes Rendus Hebdomadaires des Séances de l’Académie des Sci-ences, 7, 7.

[19]   Klemm, D., Heublein, B., Fink, H.P. and Bohn, A. (2005) Cellulose: Fascinating Biopolymer and Sustainable Raw Material. Angewandte Chemie International Edition, 44, 3358-3393.
http://dx.doi.org/10.1002/anie.200460587

[20]   French, A. and Johnson, G. (2007) Cellulose Shapes. In: Brown Jr., R.M. and Saxena, I., Eds., Cellulose: Molecular and Structural Biology, Springer, Dordrecht, 257-284.
http://dx.doi.org/10.1007/978-1-4020-5380-1_15

[21]   Kondo, T. (2007) Nematic Ordered Cellulose: Its Structure and Properties. In: Brown Jr., R.M. and Saxena, I., Eds., Cellulose: Molecular and Structural Biology, Springer, Dordrecht, 285-305.
http://dx.doi.org/10.1007/978-1-4020-5380-1_16

[22]   Tashiro, K. and Kobayashi, M. (1991) Theoretical Evaluation of Three-Dimensional Elastic Constants of Native and Regenerated Celluloses: Role of Hydrogen Bonds. Polymer, 32, 1516-1526.
http://dx.doi.org/10.1016/0032-3861(91)90435-L

[23]   Nissan, A.H., Byrd, V.L., Batten, G.L. and Ogden, R.W. (1985) Paper as an H-Bond Dominated Solid in the Elastic and Plastic Regimes. Tappi Journal, 68, 118-124.

[24]   Zhu, J.Y., Sabo, R. and Luo, X. (2011) Integrated Production of Nano-Fibrillated Cellulose and Cellulosic Biofuel (Ethanol) by Enzymatic Fractionation of Wood Fibers. Green Chemistry, 13, 1339-1344.
http://dx.doi.org/10.1039/c1gc15103g

[25]   Turbak, A.F., Snyder, F.W. and Sandberg, K.R. (1983) Microfibrillated Cellulose. Patent No. US 4374702 A.

[26]   Wang, Q.Q., Zhu, J.Y., Gleisner, R., Kuster, T.A., Baxa, U. and McNeil, S.E. (2012) Morphological Development of Cellulose Fibrils of a Bleached Eucalyptus Pulp by Mechanical Fibrillation. Cellulose, 19, 1631-1643.
http://dx.doi.org/10.1007/s10570-012-9745-x

[27]   Spence, K., Venditti, R., Rojas, O., Habibi, Y. and Pawlak, J. (2011) A Comparative Study of Energy Consumption and Physical Properties of Microfibrillated Cellulose Produced by Different Processing Methods. Cellulose, 18, 1097-1111.
http://dx.doi.org/10.1007/s10570-011-9533-z

[28]   Bilodeau, M.A. and Paradis, M.A. (2013) Energy Efficient Process for Preparing Nanocellulose Fibers. Patent No. EP 2861799 A1.

[29]   Graveson, I. (2014) Low Energy Method for the Preparation of Non-Derivatized Nanocellulose. Patent No. WO 2014009517 A1.

[30]   Taipale, T., Österberg, M., Nykänen, A., Ruokolainen, J. and Laine, J. (2010) Effect of Microfibrillated Cellulose and Fines on the Drainage of Kraft Pulp Suspension and Paper Strength. Cellulose, 17, 1005-1020.
http://dx.doi.org/10.1007/s10570-010-9431-9

[31]   Ankerfors, M. (2012) Microfibrillated Cellulose: Energy Efficient Preparation Techniques and Key Properties. Licentiate Thesis, KTH Royal Institute of Technology, Stockholm, 49.

[32]   Nelson, K., Retsina, T., Pylkkanen, V. and O’Connor, R. (2014) Processes and Apparatus for Producing Nanocellulose, and Compositions and Products Produced Therefrom. Patent No. US 20140154757 A1.

[33]   Tejado, A. (2013) Review Series 1—Biorefinery and Microfibrillated Cellulose. 1st INNOBITE Workshop, INNOBITE-WP8-DEL-D813-CIMV-20140314-v02doc.

[34]   Pääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., et al. (2007) Enzymatic Hydrolysis Combined with Mechanical Shearing and High-Pressure Homogenization for Nanoscale Cellulose Fibrils and Strong Gels. Biomacromolecules, 8, 1934-1941.
http://dx.doi.org/10.1021/bm061215p

[35]   Janardhnan, S. and Sain, M. (2011) Targeted Disruption of Hydroxyl Chemistry and Crystallinity in Natural Fibers for the Isolation of Cellulose Nano-Fibers via Enzymatic Treatment. BioResources, 6, 1242-1250.

 
 
Top