JPEE  Vol.3 No.12 , December 2015
Sensitivity Analysis of a 50+ Coal-Fired Power Unit Efficiency
Abstract: The coal-fired power unit integration with a CO2 capture and compression installation involves a considerable rise in the costs of electricity generation. Therefore, there is a need for a continuous search for methods of improving the electricity generation efficiency in steam power plants. One technology which is especially promising is the advanced ultra-supercritical (A-USC) power unit. Apart from steam parameters upstream the turbine, the overall efficiency also depends on the efficiency values of individual elements of the plant and the size of energy consumption of the process of CO2 sequestration from the boiler flue gases. These problems are considered herein to emphasize that without specifying the efficiency values of the power plant main elements the information concerning its electricity generation efficiency is incomplete. This paper presents the influence of the efficiency of individual elements of the power plant on its electricity generation efficiency. The lack of information of the efficiencies of the power plant individual elements, by presenting its overall efficiency, may lead to the false conclusions.
Cite this paper: Stępczyńska-Drygas, K. , Dykas, S. and Smołka, K. (2015) Sensitivity Analysis of a 50+ Coal-Fired Power Unit Efficiency. Journal of Power and Energy Engineering, 3, 19-31. doi: 10.4236/jpee.2015.312003.

[1]   Rosenkranz, J. and Wichtmann, A. (2005) Balancing Economics and Environmental Friendliness—The Challenge for Supercritical Coal-Fired Power Plants with Highest Steam Parameters in the Future.

[2]   Smolka, K., Stepczyńska-Drygas, K., Dykas, S. and Wróblewski W. (2014) Machinery and Equipment for an Advanced Ultra-Supercritical Coal-Fired Power Unit. Proceedings of the 8th International Science and Technology Conference “Energetyka 2014”, Wroclaw, 5-7 November 2014, 107-117 (in Polish).

[3]   Breeze, P. (2012) Raising Steam Plant Efficiency—Pushing the Steam Cycle Boundaries. PEI Magazine, 20, 16-20.

[4]   Pfaff, I., Oexmann, J. and Kather, A. (2010) Optimised Integration of Post-Combustion CO2 Capture Process in Greenfield Power Plants. Energy, 35, 4030-4041.

[5]   Stepczyńska-Drygas, K., Dykas, S., Lukowicz, H. and Czaja, D. (2014) Assessment of the Impact of a Coal-Fired Power Unit Integration with a CO2 Capture Installation on Operation under Varied Load Conditions. Proceedings of the International Science and Technology Conference GRE 2014, Szczyrk, 16-18 June 2014, 98 (in Polish).

[6]   Electric Power Research Institute (2012) Outlook 2011. Electric Power Research Institute, Palo Alto.

[7]   Leyzerovich, A. (2005) Steam Turbines for Modern Fossil-Fuel Power Plants. The Fairmont Press Inc., Liburn.

[8]   Stepczyńska-Drygas, K., Lukowicz, H. and Dykas, S. (2013) Calculation of an Advanced Ultra-Supercritical Power Unit with a CO2 Capture Installation. Energy Conversion and Management, 74, 201-208.

[9]   Stepczyńska-Drygas, K., Bochon, K., Dykas, S., Lukowicz, H. and Wróblewski, W. (2013) Operation of a Conceptual A-USC Power Unit Integrated with a CO2 Capture Installation at Part Load. Journal of Power Technologies, 93, 383-394.