WJNSE  Vol.5 No.4 , December 2015
Synthesis and Properties of Fumed Silicas Modified with Mixtures of Poly(methylphenylsiloxane) and Dimethyl Carbonate
ABSTRACT
Effect of the concentration ratios of organosiloxane/initiator and treatment temperature on the characteristics of hydrophobic products obtained by modification of surface of fumed silica with poly(methylphenylsiloxane) (PMPS) in the presence of dimethyl carbonate has been studied. Morphology, particle size, surface area and coating microstructure of modified silicas were analyzed by methods of transmission electron and atomic force microscopies, nitrogen adsorption-desorption data. Carbon contents in the grafted modifying layer of organosilicas were determined using IR spectroscopy and elemental analysis. Hydrophilic-hydrophobic properties of surface of the obtained modified silicas were estimated by measurements of contact angles of wetting. It was shown that modification of pyrogenic silicas with mixtures of poly(methylphenylsiloxane) and dimethyl carbonate allows to obtain the homogeneous hydrophobic products and serve their nanodispersity.

Cite this paper
Protsak, I. , Tertykh, V. , Bolbukh, Y. , Sternik, D. and Derylo-Marczewska, A. (2015) Synthesis and Properties of Fumed Silicas Modified with Mixtures of Poly(methylphenylsiloxane) and Dimethyl Carbonate. World Journal of Nano Science and Engineering, 5, 152-160. doi: 10.4236/wjnse.2015.54017.
References
[1]   Zenkevich, I.G., Makarov, A.A. and Ivanova, K.V. (2014) Characteristic Variations of Gas-Chromatographic Retention Indices for Phases of Variable Composition. Analytical Chemistry, 69, 1089-1095.
http://dx.doi.org/10.1134/S1061934814110148

[2]   Yang, M.H., Chen, I.L. and Wu, D.H. (1996) Chemically Bonded Phenylsilicone Stationary Phases for the Liquid-Chromatographic Separation of Polycyclic Aromatic-Hydrocarbons and Cyclosiloxanes. Journal of Chromatography A, 722, 97-105.
http://dx.doi.org/10.1016/0021-9673(95)00577-3

[3]   Lisichkin, G.V. (1986) Modified Silicas in Sorption, Catalysis and Chromatography. Khimiya, Moscow. (In Russian)

[4]   Protsak, I.S., Kozakevich, R.B., Bolbukh, Yu.M. and Tertykh, V.A. (2013) Viscosimetric Study of Polydimethylsiloxane Depolymerization with Dimethyl Carbonate. Chemical Industry, 117, 58-62. (In Ukrainian)

[5]   Demianenko, E.M., Grebenyuk, A.G., Lobanov, V.V., Tertykh, V.A., Protsak, I.S., Bolbukh, Yu.M. and Kozakevych, R.B. (2014) Quantum Chemical Study on Interaction of Dimethyl Carbonate with Polydimethylsiloxane. Chemistry, Physics and Technology of Surface, 5, 473-479.

[6]   Protsak, I.S., Tertykh, V.A., Goncharuk, O.V., Bolbukh, Yu.M. and Kozakevich, R.B. (2014) Hydrophobization of the Fumed Silica Surface with Polydimethylsiloxanes in the Presence of Alkyl Carbonates. Chemistry, Physics and Technology of Surface, 5, 226-235. (In Ukrainian)

[7]   Okamoto, M., Suzuki, S. and Suzuki, E. (2004) Polysiloxane Depolymerization with Dimethyl Carbonate Using Alkali Metal Halide Catalysts. Applied Catalysis A: General, 261, 239-245.
http://dx.doi.org/10.1016/j.apcata.2003.11.005

[8]   Okamoto, M., Miyazaki, K., Kado, A. and Suzuki, E. (2001) Deoligomerization of Siloxanes with Dimethyl Carbonate over Solid-Base Catalysts. Chemical Communication, 18, 1838-1839.
http://dx.doi.org/10.1039/b104371b

[9]   Tundo, P., Arico, F., Rosamilia, A.E., Grego, S. and Rossi, L. (2008) Dimethyl Carbonate: Green Solvent and Ambident Reagent. Green Chemical Reactions, 213-232.

[10]   Arico, F. and Tundo, P. (2010) Dimethyl Carbonate: A Modern Green Reagent and Solvent. Russian Chemical Reviews, 79, 479-489.
http://dx.doi.org/10.1070/RC2010v079n06ABEH004113

[11]   Brunauer, S., Emmett, P.H. and Teller, E. (1938) Adsorption of Gases in Multimolecular Layers. Journal of the American Chemical Society, 60, 309-319.
http://dx.doi.org/10.1021/ja01269a023

[12]   Nguyen, С. and Do, D.D. (1999) A New Method for the Characterization of Porous Materials, Langmuir, 15, 3608-3615.

[13]   Gun’ko, V.M. (2014) Composite Materials: Textural Characteristics. Applied Surface Science, 307, 444-454.
http://dx.doi.org/10.1016/j.apsusc.2014.04.055

[14]   Gun’ko, V.M. (2000) Consideration of the Multicomponent Nature of Adsorbents during Analysis of Their Structural and Energy Parameters. Theoretical and Experimental Chemistry, 36, 319-324.
http://dx.doi.org/10.1023/A:1005264427135

[15]   Gun’ko, V.M., Meikle, S.T., Kozynchenko, O.P., Tennison, S.R., Ehrburger-Dolle, F., Morfin, I. and Mikhalovsky, S.V. (2011) Comparative Characterization of Carbon Adsorbents and Polymer Precursors by Small-Angle X-Ray Scattering and Nitrogen Adsorption Methods. The Journal of Physical Chemistry A, 115, 10727-10735.
http://dx.doi.org/10.1021/jp201835r

[16]   Do, D.D., Nguyen, C. and Do, H.D. (2001) Characterization of Micromesoporous Carbon Media. Colloids and Surfaces A: Physicochemical and Engineering, 187, 51-71.
http://dx.doi.org/10.1016/S0927-7757(01)00621-5

[17]   Gun’ko, V.M. and Mikhalovsky, S.V. (2004) Evaluation of Slitlike Porosity of Carbon Adsorbents. Carbon, 42, 843-849.
http://dx.doi.org/10.1016/j.carbon.2004.01.059

[18]   Toth, A., Voitko, K.V., Bakalinska, O., Prykhod’ko, G.P., Bertóti, I., Martlinez-Alonso, A., Tascon, J.M.D., Gun’ko, V.M. and Laszloa, K. (2012) Morphology and Adsorption Properties of Chemically Modified MWCNT Probed by Nitrogen, n-Propane and Water Vapor. Carbon, 50, 577-585.
http://dx.doi.org/10.1016/j.carbon.2011.09.016

[19]   Myronyuk, L.I., Myronyuk, I.F., Chelyadyn, V.L., Sachko, V.M., Nazarkovsky, M.A., Leboda, R., Skubiszewska-Zieba, J. and Gun’ko, V.M. (2013) Structural and Morphological Features of Crystalline Nanotitania Synthesized in Different Aqueous Media. Chemical Physics Letters, 583, 103-108.
http://dx.doi.org/10.1016/j.cplett.2013.07.068

[20]   Gun’ko, V.M., Voronin, E.F., Nosach, L.V., Turov, V.V., Wang, Z., Vasilenko, A.P., Leboda, R., Skubiszewska-Zieba, J., Janusz, W. and Mikhalovsky, S.V. (2011) Structural, Textural and Adsorption Characteristics of Nano-Silica Mechanochemically Activated in Different Media. Journal of Colloid and Interface Science, 355, 300-311.
http://dx.doi.org/10.1016/j.jcis.2010.12.008

[21]   Sternik, D., Majdan, M., Derylo-Marczewska, A., Zukociński, G., Gladysz-Plaska, A., Gun’ko, V.M. and Mikhalovsky, S.V. (2011) Influence of Basic Red 1 Dye Adsorption on Thermal Stability of Na-Clinoptilolite and Na-Bentonite. Journal of Thermal Analysis and Calorimetry, 103, 607-615.
http://dx.doi.org/10.1007/s10973-010-1014-3

[22]   Davydov, V.Y. (2000) Adsorption on Silica Surface. In: Papirer, E., Ed., Surfactant Science Series, Marcel Dekker, New York, 63-118.

[23]   Gun’ko, V.M., Borysenko, M.V., Pissis, P., Spanoudaki, A., Shinyashiki, N., Sulim, I.Y., Kulik, T.V. and Palyanytsya, B.B. (2007) Polydimethylsiloxane at the Interfaces of Fumed Silica and Zirconia/Fumed Silica. Applied Surface Science, 253, 7143-7156.
http://dx.doi.org/10.1016/j.apsusc.2007.02.185

[24]   Gao, D., Jia, M. and Luo, Y. (2013) Crosslinked Organosiloxane Hybrid Materials Prepared by Condensation of Silanol and Modified Silica: Synthesis and Characterization. Chinese Journal of Polymer Science, 31, 974-983.
http://dx.doi.org/10.1007/s10118-013-1289-5

[25]   Condon, J.B. (2006) Surface, Area and Porosity Determinations by Physisorption, Measurements and Theory. Elsevier, Amsterdam.

[26]   Sing, K.S.W. (1982) Reporting Physisorption Data for Gas/Solid Systems with Special Reference to the Determination of Surface Area and Porosity. Pure and Applied Chemistry, 54, 2201-2218.
http://dx.doi.org/10.1351/pac198254112201

[27]   Gregg, S.J. and Sing, K.S.W. (1991) Adsorption, Surface Area and Porosity. 2nd Edition, Academic Press, London.

 
 
Top