Back
 OJSST  Vol.5 No.4 , December 2015
Review on Rockburst Theory and Types of Rock Support in Rockburst Prone Mines
Abstract: As the depth of mining increases, the occurrence of seismic events is becoming a more common phenomenon causing serious problems regarding to the stability and safety of mines. However, seismicity and the accompanying rockburst phenomena are not a well-defined and well-understood in underground excavations in these times. Efforts to clearly explain the mechanisms are underway. This paper is an overview on the mechanism of rockburst and supports applicably in rockburst prone excavations, predicted classification scales for damage on rock surfaces and rock supports. Current design methods for support systems are reviewed, which are mostly dependent on practical approaches and are geared towards static support design. Based on this, the current review focuses on ground supports under dynamic conditions.
Cite this paper: Kabwe, E. and Wang, Y. (2015) Review on Rockburst Theory and Types of Rock Support in Rockburst Prone Mines. Open Journal of Safety Science and Technology, 5, 104-121. doi: 10.4236/ojsst.2015.54013.
References

[1]   Mendecki, M.A. (1999) A Guide to Routine Seismic Monitoring in Mines. Creda Communications, Cape Town.

[2]   Larsson, K. (2004) Mining Induced Seismicity in Sweden. Master’s Thesis, Luleå University of Technology, Luleå.

[3]   Blake, W. and Hedley, D.G. (2003) Rockbursts, Case Studies from North American Hard-Rock Mines. Society for Mining, Metallurgy and Exploration Inc., Littleton.

[4]   Per John, L. (1983) Hard Rock Pillar Strength Estimation an Applied Empirical Approach. Masters’s Thesis, The University of British Columbia, Vancouver.

[5]   Woldemedhin, Y.B. and Mwagalanyi, H. (2011) Investigation of Rock-Fall and Support Damage Induced by Seismic Motion at Kiirunavaara Mine. Master’s Thesis, Luleå University, Luleå.

[6]   Malmgren, L. (2005) Interaction between Shotcrete and Rock: Experimental and Numerical Study. PhD Thesis, Luleå University of Technology, Luleå.

[7]   Cai, M. and Kaiser, P.K. (2012) Design of Rock Support System under Rockburst Condition. Journal of Rock Mechanics and Geotechnical Engineering, 4, 215-227.

[8]   Bawden, F.W. (2011) Ground Control Using Cable and Rock Bolting. In: Darling, P., Ed., SME Mining Engineering Handbook, Society for Mining, Metallurgy and Exploration Inc., Littleton, 616-617.

[9]   Stillborg, B. (1994) Professional Users Handbook for Rock Bolting. Trans Tech Publications, Clausthal-Zellerfeld.

[10]   Rajua, D., Mitria, H. and Thibodeaub, D. (2011) Mine Safety Enhancement by Designing Dynamic Rock Supports. 1st International Symposium on Mine Safety Science and Engineering, Sudbury, November 2011, 1591-1602.

[11]   Hoek, E., Kaiser, P.K. and Bawden, W.F. (1995) Support of Underground Excavation in Hard Rock. Balkema, Rotterdam.

[12]   Li, C.C. (2010) A New Energy-Absorbing Bolt for Rock Support in High Stress Rock Masses. International Journal of Rock Mechanics & Mining Sciences, 47, 396-404.
http://dx.doi.org/10.1016/j.ijrmms.2010.01.005

[13]   Li, CC. (2007) A Practical Problem with Threaded Rebar Bolts in Reinforcing Largely Deformed Rock Masses. Rock Mechanics and Rock Engineering, 40, 519-524.
http://dx.doi.org/10.1007/s00603-006-0094-7

[14]   Li, C.C. (2010) Field Observations of Rock Bolts in High Stress Rock Masses. Rock Mechanics and Rock Engineering, 43, 491-496.
http://dx.doi.org/10.1007/s00603-009-0067-8

[15]   Wang, G., Wu, X.Z. and Jiang, Y.J. (2012) A New Yielding Bolt for Rock Support in High Stress Rock Masses. Applied Mechanics and Materials, 204-208, 366-369.
http://dx.doi.org/10.4028/www.scientific.net/AMM.204-208.366

[16]   Ortlepp, W.D. (1992) The Design of Support for the Containment of Rockburst Damage in Tunnels—An Engineering Approach. In: Kaiser, P.K. and McCreath, D.R., Eds., Rock Support in Mining and Underground Construction, Balkema, Rotterdam, 593-609.

[17]   Jager, A.J. (1992) Two New Support Units for the Control of Rockburst Damage. In: Kaiser, P.K. and McCreath, D.R., Eds., Rock Support in Mining and Underground Construction, Balkema, Rotterdam, 621-631.

[18]   Cai, M. (2013) Principles of Rock Support in Burst-Prone Ground. Tunneling and Underground Space Technology, 36, 46-56.
http://dx.doi.org/10.1016/j.tust.2013.02.003

[19]   Smith, M. (2007) Rock & Soil Reinforcement. Ulf Linder, Örebro.

[20]   Smith, M. (2007) Underground Mining Methods. Ulf Linder, Örebro.

[21]   Li, C.C. and Marklund, P.I. (2004) Field Tests of the Cone Bolt in the Boliden Mines. In: Hamre, L., Rohde, J.K.G., Berg, K.R. and Nilsen, B., Eds., Fjellsprengninsteknikk/Bergmekanikk/Geoteknikk, Norsk Jord og Fjellteknisk Forbund, Oslo, 12.

[22]   Simser, B., Andrieux, P., Mercier-Langevin, F., Parrott, T. and Turcotte, P. (2007) Field Behaviour and Failure Modes of Modified Conebolts at the Craig, LaRonde and Brunswick Mines in Canada. In: Hadjigeorgiou, J., Stacey, D. and Potvin, Y., Eds., Challenges in Deep and High Stress Mining, Australian Centre for Geomechanics, Perth, 347-354.

[23]   Wang, G., Wu, X.Z., Jiang, Y.J., Huang, N. and Wang, S.G. (2013) Quasi-Static Laboratory Testing of a New Rock Bolt for Energy-Absorbing Applications. Tunnelling and Underground Space Technology, 38, 122-128.
http://dx.doi.org/10.1016/j.tust.2013.05.010

[24]   Varden, R., Lachenicht, R., Player, J., Thompson, A. and Villaescusa, E. (2008) Development and Implementation of the Garford Dynamic Bolt at the Kanowna Belle Mine. 10th Underground Operators’ Conference, Launceston, 14-16 April 2008, 95-102.

[25]   Guntumadugu, D.R. (2013) Methodology for the Design of Dynamic Rock Supports in Burst Prone Ground. PhD Thesis, Department of Mining and Materials Engineering, McGill University, Montreal.

[26]   Wu, R., Oldsen, J. and Campoli, A. (2011) Application of Yield-Lok Bolt for Bursting and Convergence Grounds in Mines. 30th International Conference on Ground Control in Mining, Morgantown, 26-28 July 2011, 1-6.

[27]   Chileshe, P.R.K. (2015) Review and Design Concept for Grouted Multi-Jacketted Friction Balancing Rock Bolt. International Journal of Scientific & Technology Research, 4, 92-100.

[28]   Milev, A.M. and Spottiswood, S.M. (2005) Strong Ground Motion and Site Response in Deep South African Mines. The Journal of the South African Institute of Mining and Metallurgy, 105, 515-524.

[29]   Kaiser, P.K., McCreath, D. and Tannant, D. (1996) Rockburst Research Handbook. CD-ROM Version, Ontario.

[30]   Kaiser, P.K. and Maloney, S.M. (1997) Scaling Laws for the Design of Rock Support. Pure and Applied Geophysics, 150, 415-434.
http://dx.doi.org/10.1007/s000240050085

[31]   Hutchinson, D.J. and Diederichs, M.S. (1996) Cablebolting in Underground Mines. Bi Tech Publishers, Richmond.

[32]   Kaiser, P.K., McCreath, D.R. and Tannant, D.D. (1995) Rockburst Support Handbook. Geomechanics Research Centre, Sudbury.

[33]   Thompson, A.G., Villaescusa, E. and Windsor, C.R. (2012) Ground Support Terminology and Classification: An Update. Geotechnical and Geological Engineering, 30, 553-580.
http://dx.doi.org/10.1007/s10706-012-9495-4

[34]   Wood, D.F. (1992) Specification and Application of Fiber Reinforced Shotcrete. In: Kaiser, P.K. and McCreath, D.R., Eds., Rock Support in Mining and Underground Construction, Balkema, Rotterdam, 149-156.

[35]   Brady, B.H.G. and Brown, E.T. (2004) Rock Mechanics for Underground Mining. 3rd Edition, Springer Science and Business Media, Dordrecht.

[36]   Charette, F. and Hill, M. (2011) Single Pass Bolting Approach for the Stabilisation of Rock Masses in High Stress Conditions. Metsco Proceeding CIM/ICM Conferences & Exhibitions, Montreal, 2011.

 
 
Top