Back
 NJGC  Vol.1 No.2 , July 2011
Evaluation of Non Crystalline Phase in AZS Refractories by XRD Methods
Abstract: The relation between the atomic structure and the macroscopic properties and behaviors of a material constitute one of the objectives of the materials science, particularly in the design and development of ceramic materials.Crystalline and non crystalline phases together with pores, grain boundaries, etc. affect mechanical and fracture properties as well as chemical resistance and electric properties. These aspects will be bonded to the raw materials chosen and the whole processing route.In glass industry, although there are other electrofused refractories such as the alumina ones used in the feeding of the fusion kilns, probably the most used refractories in contact with the melted glass are electrofused materials that belong to the Al2O3-SiO2-ZrO2 system commonly named AZS.Exceptionally for refractory materials the amount of the glassy phase in a AZS material is important and appreciable; and makes them particularly adequate for containing fussed glass. The glass proportion will define much of their properties and behaviors.In the present work the results of the non crystalline phase quantification of two samples of commercial AZS materials are presented and compared. These were obtained by three different methods using in the X ray powder diffraction (XRD) techniques. The first method consists in the linear interpolation of the base lines of the diffractograms compared to the amorphous silica and the fully crystalline quartz. The other two methods are based in the application of the Rietveld method. One is the internal standard method with quartz as fully crystalline standard and the other one consist in the inclusion of the glassy phase to the refinement with a structural model that can be understood as the widening of the peaks consequence of an extreme decrease in the crystallite size of a quartz phase.The three methods showed equivalent results (with differences less than 3%) for the two samples and demonstrated that are adequate for the quantification of the non crystalline phase in this kind of materials.
Cite this paper: nullM. Conconi, N. Rendtorff and E. Aglietti, "Evaluation of Non Crystalline Phase in AZS Refractories by XRD Methods," New Journal of Glass and Ceramics, Vol. 1 No. 2, 2011, pp. 28-33. doi: 10.4236/njgc.2011.12005.
References

[1]   G. Duvierre, E. Sertain and A. Rebert, “Advantages of Using High Zirconia Refractories in Lead Crystal Glass Electricfurnaces,” Glass Technology, Vol. 34, No. 5, 1993, pp. 181-186.

[2]   P. C. Ratto, “Réfractaires Electrofondus du Systeme AZS: Différentes Méthodes de Fabrication Oxydantes et Leurs Impacts sur le Comportement du Réfractaire en Service,” Verre, Vol. 8, No. 3, 2002, pp. 22-27.

[3]   E. Lataste, “Comportement Mecanique et Endommage-ment de Refractaires Electrofondus sous Sollicitation Thermomecanique,” Ph.D. Dissertation, INSA de Lyon, 2005.

[4]   S. Yamamura, M. Kitano and Y. Kakimoto, “An Integrated Approach to Optimum Furnace Design,” Glass International, Vol. 30, No. 1, 2007, pp. 40-41.

[5]   J. Zborowski, “Some Aspects of Characterization of the Refractories for Glass Contact,” Proceedings of the Unified International Technical Conference on Refractories: the 9th Biennial Worldwide Congress on Refractories, 2006, pp. 690-694.

[6]   S. M. Winder, K. R. Selkregg and A. Gupta, “Update on Selection of Refractories for Oxy-Fuel Glass-Melting Service,” Ceramic Engineering and Science Proceedings, Vol. 20, No. 1, 1999, pp. 81-105.

[7]   S. M. Ohlberg and D. W. Strickler, “Determination of Percent Crystallinity of Partial Devitrified Glass by X-Ray Diffraction,” Journal of the American Ceramic Society, Vol. 45, No. 4, 1962, pp.170-171. doi:10.1111/j.1151-2916.1962.tb11114.x

[8]   J. P. Willams, G. B. Carrier, H. J. Holland and F. J. Farncomb, “The Determination of the Crystalline Content of Glass-Ceramics,” Journal of Materials Science, Vol. 2, No. 6, 1967, pp. 513-520. doi:10.1007/BF00752217

[9]   S. Morimoto, “Phase Separation and Crystallization in the System SiO2-Al2O3-P2O5-B2O3-Na2O Glasses,” Journal of Non-Crystalline Solids, Vol. 352, No. 8, 2006, pp. 756-760. doi:10.1016/j.jnoncrysol.2006.02.007

[10]   H. M. Rietveld, “A Profile Refinement Method for Nuclear and Magnetic Structures,” Journal of Applied Crystallography, Vol. 2, No. 2, 1969, pp. 65-71. doi:10.1107/S0021889869006558

[11]   R. A. Young, “The Rietveld Method,” International Union Crystallography, Oxford University Press, Oxford, 1993.

[12]   D. L. Bish and S. Howard, “Quantitative Phase Analysis Using the Rietveld Method,” Journal of Applied Crystallography, Vol. 21, No. 2, 1988, pp. 86-91. doi:10.1107/S0021889887009415

[13]   N. V. Y. Scarlett, I. C. Madsen, L. M. D. Cranswick, T. L. Edward Groleau, G. Stephenson, M. Aylmore and N. Agron-Olshina, “Outcomes of the International Union of Crystallography Commission on Powder Diffraction Round Robin on Quantitative Phase Analysis: Samples 2, 3, 4, Synthetic Bauxite, Natural Granodiorite and Pharmaceuticals,” Journal of Applied Crystallography, Vol. 35, No. 4, 2002, pp. 383-400. doi:10.1107/S0021889802008798

[14]   A. G. De La Torre, S. Bruque and M. A. G. Aranda, “Rietveld Quantitative Amorphous Content Analysis,” Journal of Applied Crystallography, Vol. 34, 2001, pp. 196-202. doi:10.1107/S0021889801002485

[15]   A. Le Bail, “Modelling the Silica Glass Structure by the Rietveld Method,” Journal of Non-Crystalline Solids, Vol. 183, No. 1-2, 1995, pp. 39-42. doi:10.1016/0022-3093(94)00664-4

[16]   L. Lutterotti, R. Ceccato, R. Dal Maschio and E. Pagani, “Quantitative Analysis of Silicate Glass in Ceramic Materials by de Rietveld Method,” Material Science Forum, Vol. 278-281, 1998, pp. 87-92. doi:10.4028/www.scientific.net/MSF.278-281.87

[17]   C. R. Ward and D. French, “Determination of Glass Content and Estimation of Glass Composition in Fly Ash Using Quantitative X-Ray Diffractometry,” Fuel, Vol. 85, 2006, pp. 2268–2277. doi:10.1016/j.fuel.2005.12.026

[18]   J. Rodríguez-Carvajal, “Recent Developments of the Program Fullprof,” Newsletter in Commission on Powder Diffraction (IUCr), Vol. 26, 2001.

 
 
Top