WJET  Vol.3 No.4 , November 2015
Application of Steel Fiber in Increasing the Strength, Life-Period and Reducing Overall Cost of Road Construction (by Minimizing the Thickness of Pavement)
Abstract: Recently, the use of steel fiber at high rates has been introduced as the sole method of reinforcement for fully elevated-suspended slabs having long span such as 5 m to 8 m each way, with a span to depth ratio of up to 33 [1]. As a result of long practical experience the total replacement of traditional rebar is a new routine. Now it is also used in the designing of SFRC pavements over conventional concrete pavements. Within the project framework a demonstration of a steel-fiber-reinforced roller-compacted concrete (SFR-RCC) pavement was constructed in a rural as well as urban area. In order to assess the economical condition of the demonstration pavement, life cycle assessment (LCA) and life cycle cost analysis (LCCA) studies were undertaken. This is the advancement study of the various papers which is already published in many publications which serve as the main and important source of study for the research. Many applications of steel fiber are listed in the paper but the main output of this paper is that SFR-RCC is more economically sustainable than others and also helps in reducing the thickness of the pavement up to 20 to 25 percent, due to the excessive strength of steel fiber. The roads of the present system required high cost investment. And the life period is almost 20 years theoretically but the actual life of the road is depending on the maintenance and the applied load. The constructions of road have been done since the 3500 BC but the method does not change fully. Also the cost of the construction is increased continuously; as a result, the construction of roads is more and more complicated and time taken. For the better and economical construction of the roads, we use steel fibers in the composite pavement. The theoretical plan of the construction of composite pavement is given in the methodology, which gives the appropriate idea about the construction of road using steel fiber. Here we use the composite pavement in which the steel fiber is mixed in the concrete layer, after which the bitumen layer is laid for the smooth and suitable riding of the vehicles.
Cite this paper: Ahad, A. , Khan, Z. and Srivastava, S. (2015) Application of Steel Fiber in Increasing the Strength, Life-Period and Reducing Overall Cost of Road Construction (by Minimizing the Thickness of Pavement). World Journal of Engineering and Technology, 3, 240-250. doi: 10.4236/wjet.2015.34025.

[1]   Japan Concrete Institute (1983) JCI Standards for Test Methods of Fiber Reinforced Concrete. Method of Test for Flexural Strength and Flexural Toughness of Fiber Reinforced Concrete (Standard SF4), 45-51.

[2]   Craig, R.J. (1984) Structural Applications of Reinforced Steel Fibrous Concrete. Concrete Int. Design and Construction.

[3]   Uses for steel-fiber-reinforced concrete in Australia”. An article of “The Aberdeen Group” which is based on the Australian paper “The Diversifying Applications of Steel Fiber Reinforced Concrete in Australia” by “Winston A. Marsden”, Technical Development Manager of AWI Fiber steel, Australia.


[5]   Jenkins, K. Introduction to Road Pavements. In: Hitchhiker’s Guide to Pavement Engineering.

[6]   ASTM C1018-89 (1991) Standard Test Method for Flexural Toughness and First Crack Strength of Fiber Reinforced Concrete (Using Beam with Third-Point Loading), Book of ASTM Standards, Part 04.02. American Society for Testing and Materials, Philadelphia, 507-513.

[7]   IS-383 (1970) Specification for Coarse and Fine Aggregates from Natural Sources for Concrete. 2nd Revision, Bureau of Indians Standards, New Delhi.

[8]   IS-10262 (2009) Recommended Guidelines for Concrete Mix Design. Bureau of Indian Standards, New Delhi.

[9]   IS-456 (2000) Indian Standard Code of Practice for Plain and Reinforced Concrete. Bureau of Indian Standards, New Delhi.

[10]   IS-800 (2007) Indian Standard Code of Practice for Steel. 3rd Revision, Bureau of Indian Standards, New Delhi

[11]   Chand, N.V. Steel Fiber Reinforced Concrete. Vietnam Joint Seminar.

[12]   Balaguru, P.N. and Shah, S.P. (1992) Fiber Reinforced Cement Composites. Mc Graw Hill International Editions.

[13]   Sinha, D.A. Characteristics Properties of Steel Fiber Reinforced Concrete with Varying Percentages of Fiber.

[14]   Johnston, C.D. (1974) Steel Fiber Reinforced Mortar and Concrete. A Review of Mechanical Properties in Fiber Reinforced Concrete ACI-SP 44-Detroit.

[15]   Barros, J.A.O. (2002) Flexural Behavior of Steel Fiber Reinforced Concrete. Testing & Modeling.

[16]   ACI Committee (1982) State of the Art Report in Fiber Reinforced Concrete. ACI 554 IR-82 Detroit Mechigan.

[17]   Henager, C.H. (1981) Steel Fibrous Shotcrete. A Summary of the State-of-the Art Concrete Int.: Design and Construction.

[18]   Endgington, J., Hannant, D.J. and Williams, R.I.T. (1974) Steel Fiber Reinforced Concrete. Current Paper CP 69/74 Building Research Establishment Garston Watford.