JMMCE  Vol.3 No.6 , November 2015
Activation of Jordanian Ore Bentonite by Sodium Carbonates
ABSTRACT
The Hashemite Kingdom of Jordan has a large reserve of raw Bentonite in the area of Ain Al-Baida at Basin of Al-Azraq city that has not activated yet to become valid as drilling mud. The Ore Ain AL-Baida Bentonite was investigated and activated by Na2CO3. The products were investigated by chemical analysis, X-Ray Diffraction, rheological properties and free swelling index with clay fraction. It was observed that the activities clay ranged between 0.98 < AC < 1.48 medium to high content of clay minerals. In addition, it was determined the Atterberg limits, the results of plasticity chart and relation between index and clay fraction. This means that the amount of the attracted water will be suitable influenced by the clay that is present in Ore Ain Al-Baida bentonite. The liquid limit was ranged between 83% to 140%, and plastic limit ranged between 39% - 48%. Also, rheological properties (apparent viscosity, plastic viscosity), gel strength, yield point, filtrate loss. These properties have been compared with those standard specifications properties required for the drilling fluid in order to know the appropriate circumstances to activate the Bentonite ore of Ain Al Baida at Azraq basin to become close to the standard specifications required for the drilling fluids, the ratio between Y.P/P.V was ranged 0.88 to 1.21, it is meant that the behavior of drilling fluids confirms the Bingham plastic and power-law rheological models using fine grinding of bentonite mixture with 3% - 6% concentration of sodium carbonate powder.

Cite this paper
Saleh, S.K. and Mahasneh, M.A. (2015) Activation of Jordanian Ore Bentonite by Sodium Carbonates. Journal of Minerals and Materials Characterization and Engineering, 3, 477-487. doi: 10.4236/jmmce.2015.36050.
References
[1]   Bates, R.L. (1969) Clay in Geology of Industrial Rock & Minerals. Dover Pub. Inc., New York, 117-151.

[2]   Grim, R. (1968) Applied Clay Mineralogy. MC. Graw-Hill Book.

[3]   Alali, J.M. (1991) Assessment of Azraq Diatomaccous Clay, Jordan. MSc Thesis, Leicester University, 85 p.

[4]   Alali, J.M. and Abu Salah, A. (1993) Exploration for Bentonite and Other Minerals in Azraq Depression. Int. Rep. NRA, Amman, 4 Volumes.

[5]   Khoury, H. (1980) Mineralogy and Origin of Azraq Clay Deposits Dirasat. University of Jordan, Amman, 21-31.

[6]   Khoury, H. (1989) Clay and Clay Minerals in Jordan. Department of Geology University of Jordan, Amman.

[7]   Nawasreh, M. (2001) Azraq Clay Minerals in Investigation of Jordanian Minerals. Cardiff University, 327 p.

[8]   Sivapullaiah, et al. (1987) Suggested a New Method for Obtain a Modified Free Swell Index for Clays.

[9]   Sivapullaiah, P.V. and Savitha, S. (1999) Index Properties of Ililte-Bentonite Mixtures in Electrolyte Solutions Technical Note. 22.

[10]   Grim and Guven (1978) Bentointe Geology Mineralogy Use and Physical Properties. Elsevier, New York, 256.

[11]   American Society for Testing and Materials (2002) Standard Test Method for Particle-Size Analysis of Soils. D DASTM, Philadelphia, 422-463.

[12]   Khoury, H. (1995) Mineralogy and Origin of Azraq Clay Deposits. Dirassat, 7, 21-31.

[13]   Kemp, S. (1995) Initial Laboratory Characterization of Clay-Bearing Rocks from Jordan. British Geological Survey Technical Report No. WG/95/16R.

[14]   Dallas, A. (1993) Standard Procedure for Testing Drilling Fluids. API R.P 13.

[15]   Drilling Mud Date Book. NL Baroid, Houston, 1954.

[16]   Magcobar Division—Oilfield Products Group—Dresser Industries (1977) Drilling Fluid Engineering Manual.

[17]   Applied Mud Technology, IMOC Services a Division of Halliburton Company, Houston.

[18]   Grim, M.R. (1974) Drilling Fluids Technology. Exxon. Co., Houston.

[19]   Bourgoyne Jr., A.T., Millheim, K.K., Chenevert, E.M. and Young Jr., F.S. (1991) Applied Drilling Engineering (SPE Textbook Series, Volume 2). Society of Petroleum Engineers, Richardson.

[20]   Irawan, S. and Samsuri, A. (2007) Utilization of Treated Malaysian Local Bentonite for Drilling Mud Material Cost Saving.

[21]   Moore, D.M. and Reynolds, R.C. (1984) X-Ray Diffraction and the Identification and Analysis of Clay Minerals. Oxford University Press, New York.

[22]   Amorim, L.V., Gomes, C.M., Lira, H. de L., França, K.B. and Ferreira, H.C. (2004) Bentonites from Boa Vista, Brazil: Physical, Mineralogical and Rheological Properties. Materials Research, 7, 583-593.
http://dx.doi.org/10.1590/S1516-14392004000400012

[23]   Mahasneh, M.A. and Saleh, S.K. (2012) Evaluation of Jordanian Bentonite Performance for Drilling Fluid Applications. Contemporary Engineering Sciences, 5, 149-170.

[24]   Norrish, K. and Qurik, J. (1954) Crystalline Swelling of Montmorillonite Use of Electrolyte to Control Swelling. Nature, 173, 255-257. http://dx.doi.org/10.1038/173255a0

[25]   Al-Maghrabi, M.N. and Aboushook, M. (2008) Activation of Khulais Bentonite Using Finegrinding Technique. Journal of King Abdulaziz University—Engineering Science, 19, 37-55.

[26]   Warkentin, B.P. (1961) Interpretation of the Upper Plastic Limit of Clays. Nature, 190, 287-288.
http://dx.doi.org/10.1038/190287a0

[27]   Warkentin, B.P. and Yong, R.N. (1960) Shear Strength of Montmorillonite and Kaolonite Related to the Interparticle Forces. Clays and Clay Minerals, 9, 210-218.
http://dx.doi.org/10.1346/CCMN.1960.0090111

 
 
Top