MSA  Vol.6 No.11 , November 2015
Dynamic Response of Pultruded Glass-Graphite/Epoxy Hybrid Composites Subjected to Transverse High Strain-Rate Compression Loading
ABSTRACT
In a previous study, the energy absorption and dynamic response of different combinations of cylindrical fiber-reinforced pultruded hybrid composite samples made of unidirectional glass and graphite fiber/epoxy, were investigated under longitudinal compression loading. It was found that placing glass fibers in the inner core of composites resulted in a higher ultimate compressive strength and specific energy absorption. In this study, the dynamic responses of pultruded glass-graphite/epoxy hybrid specimens with rectangular cross-section subjected to transverse compression loading are reported. Crack initiation and propagation was monitored using a high-speed video camera, and the effects of hybridization were analyzed. It was found that the location of glass or graphite fibers inside the pultruded composites has no significant effect on the ultimate compressive strength under such transverse compression loading. The energy absorption in all the hybrid specimens was almost identical. Graphite/epoxy composite showed higher specific energy absorption due to its lower density, and glass/epoxy composite had the lowest specific energy absorption.

Cite this paper
Afrough, M. , Pandya, T. , Daryadel, S. and Mantena, P. (2015) Dynamic Response of Pultruded Glass-Graphite/Epoxy Hybrid Composites Subjected to Transverse High Strain-Rate Compression Loading. Materials Sciences and Applications, 6, 953-962. doi: 10.4236/msa.2015.611096.
References
[1]   Swaminathan, R. and Raju Mantena, P. (2003) Axial Loading and Buckling Response Characteristics of Pultruded Hybrid Glass-Graphite/Epoxy Composites. Journal of Reinforced Plastics and Composites, 22.

[2]   Nori, C.V., Raju Mantena, P. and McCarty, T.A. (1996) Experimental and Finite Element Analysis of Pultruded Glass-Graphite/Epoxy Hybrids in the Axial and Flexural Modes of Vibration. Journal of Composite Materials, 30.
http://dx.doi.org/10.1177/002199839603001803

[3]   Shokrieh, M.M. and Omidi, M.J. (2011) Investigating the Transverse Behavior of Glass-Epoxy Composites under Intermediate Strain Rates. Journal of Composite Structures, 93, 690-696.
http://dx.doi.org/10.1016/j.compstruct.2010.08.010

[4]   Hosur, M.V., Adya, M., Jeelani, S., Vaidya, U.K. and Dutta, P.K. (2004) Experimental Studies on the High Strain Rate Compression Response of Woven Graphite/Epoxy Composites at Room and Elevated Temperatures. Journal of Reinforced Plastics and Composites, 23, 491-514.
http://dx.doi.org/10.1177/0731684404032019

[5]   Vaughan, J.G., Roux, J.A. and Mantena, P.R. (1992) Characterization of Mechanical and Thermal Properties of Advanced Composite Pultrusion. Proceedings of the 1992 NSF Design and Manufacturing Systems Conference, 1141-1145.

[6]   Mantena, P.R., Vaughan, J.G., Donti, R.P. and Kowsika, M.V. (1992) Influence of Process Variables on the Dynamic Characteristics of Pultruded Graphite-Epoxy Composites. Vibro-Acoustic Characterization of Materials and Structures, ASME, 14, 147-154.

[7]   Almagableh, A., Gupta, S., Raju Mantena, P. and Al-Ostaz, A. (2008) Dynamic Mechanical Analysis of Graphite Platelets and Nanoclay Reinforced Vinyl Ester, and MWCNT Reinforced Nylon 6.6 Nanocomposites. Proceedings of the 2008 SAMPE Fall Technical Conference, (Paper # 034 on CD) ROM, Memphis, 8-11 September 2008.

[8]   Jadhav, P., Raju Mantena, P. and Gibson, R.F. (2006) Energy Absorption and Impact Damage Evaluation of Grid-Stiffened Composite Panels under Transverse Loading. Composites Engineering, Part B, 37, 191-199.
http://dx.doi.org/10.1016/j.compositesb.2005.05.017

[9]   Kowsika, M., Raju Mantena, P. and Balasubramniam, K. (2002) Energy Absorption and Dissipation Characteristics of Pultruded Glass-Graphite/Epoxy Hybrid Composite Beams. Journal of Thermoplastic Composite Materials, 15.
http://dx.doi.org/10.1177/0892705702015003453

[10]   Raju Mantena, P., Mann, R. and Nori, C.V. (2003) Low Velocity Impact Response and Dynamic Characteristics of Glass-Resin Composites. Journal of Reinforced Plastics and Composites, 20, 513-534.

[11]   Barpanda, D. and Mantena, P.R. (1998) Effects of Hybridization on the Creep and Stress Relaxation Characteristics of Pultruded Composites. Journal of Reinforced Plastics and Composites, 17, 234-249.

[12]   Barpanda, D. and Mantena, P.R. (1996) Dynamic Mechanical Analysis of Pultruded Glass-Graphite/Epoxy Hybrid Composites at Elevated Temperatures. Journal of Reinforced Plastics and Composites, 15, 497-532.

[13]   Kumar, S. and Mantena, P.R. (1996) Dynamic and Static Torsional Characterization of Pultruded Hybrid Cylindrical Composite Rods. Journal of Composite Materials, 30, 918-932.
http://dx.doi.org/10.1177/002199839603000804

[14]   Gibson, R.F. (2007) Principles of Composite Material Mechanics. 2nd Edition, CRC Press, Boca Raton.

[15]   Sierakowski, R.L. (1997) Strain Rate Effects in Composites. Applied Mechanics Reviews, 50, 741-761.

[16]   Hamouda, A.M.S. and Hashmi, M.S.J. (1998) Testing of Composite Materials at High Rates of Strain, Advances and Challenges. Journal of Materials Processing Technology, 77, 327-336.
http://dx.doi.org/10.1016/S0924-0136(97)00436-6

[17]   Al-Hassani, S.T.S. and Kaddour, A.S. (1998) Strain Rate Effects on GRP, KRP and CFRP Composite Laminates. Key Engineering Materials, 141-143, 427-452.
http://dx.doi.org/10.4028/www.scientific.net/KEM.141-143.427

[18]   Ochola, R.O., Marcus, K., Nurick, G.N. and Franz, T. (2004) Mechanical Behaviour of Glass and Carbon Fiber Reinforced Composites at Varying Strain Rates. Journal of Composite Structures, 63, 455-467.
http://dx.doi.org/10.1016/S0263-8223(03)00194-6

[19]   Hangai, Y., Kubota, N., Utsunomiya, T., Kawashima, H., Kuwazuru, O. and Yoshikawa, N. (2015) Drop Weight Impact Behavior of Functionally Graded Aluminum Foam Consisting of A1050 and A6061 Aluminum Alloys. Journal of Materials Science & Engineering A, 639, 597-603.
http://dx.doi.org/10.1016/j.msea.2015.05.007

[20]   Gama, B.A., Lopatnikov, S.L. and Gillespie Jr., J.W. (2004) Hopkinson Bar Experimental Technique, a Critical Review. Applied Mechanics Reviews, 57, 223-250.

[21]   Yokoyama, T., Nakai, K. and Odamura, T. (2007) High Strain-Rate Compressive Characteristics of a Unidirectional Carbon/Epoxy Composite: Effect of Loading Directions. In: Gdoutos, E.E., Ed., Experimental Analysis of Nano and Engineering Materials and Structures, Springer, Dordrecht, 681-682.
http://dx.doi.org/10.1007/978-1-4020-6239-1_338

[22]   Daryadel, S.S., Ray, C., Pandya, T. and Mantena, P.R. (2015) Energy Absorption of Pultruded Hybrid Glass/Graphite Epoxy Composites under High Strain-Rate SHPB Compression Loading. Materials Sciences and Applications, 6, 511-518.
http://dx.doi.org/10.4236/msa.2015.66054

[23]   Mantena, P.R., Vangipuram, R. and Vaughan, J.G. (1994) Dynamic Flexural Properties of Pultruded Glass/Graphite Hybrid Composites. Proceedings of the 39th International SAMPE Symposium, Anaheim, 11-14 April 1994, 174-182.

 
 
Top