AMPC  Vol.5 No.11 , November 2015
Controlled Texturing of Aluminum Sheet for Solar Energy Applications
ABSTRACT
Aluminum sheets were polished to reduce ruggedness and then textured in varying acid-ethanol concentration etchant to form pores. The textured surface was characterized structurally by using X-ray diffraction (XRD) which revealed aluminum crystallographic planes (1 1 1), (2 0 0), (2 2 0) and (3 1 1). Its morphology was studied by using energy dispersive X-ray (EDX) and scanning electron microscope (SEM) that confirmed purity of aluminum sheet to be 99.66% at. Reflectance of textured and plain aluminum sheet was analyzed by spectrophotometric measurements which showed that texturing reduced the reflectance of the polished surface by 26% in the UV-VIS-NIR spectrum of solar radiation. With reduced reflectance of the textured aluminum sheet, it was applicable for solar radiation absorption.

Cite this paper
Ayieko, C. , Musembi, R. , Ogacho, A. , Aduda, B. , Muthoka, B. and Jain, P. (2015) Controlled Texturing of Aluminum Sheet for Solar Energy Applications. Advances in Materials Physics and Chemistry, 5, 458-466. doi: 10.4236/ampc.2015.511046.
References
[1]   Quashing, V. (2005) Understanding Renewable Systems. Earthscan, London, 1-130.

[2]   Duffie, J.A. and Beckman, W.A. (2006) Solar Engineering of Thermal Processes. 3rd Edition, Wiley, Hoboken, 78-84.

[3]   Granqvist, C.G. (1989) Spectrally Selective Surfaces for Heating and Cooling Applications. In: Potter, R.F., Ed., Tutorial Texts in Optical Engineering, Vol. TT1, SPIE Optical Engineering Press, Bellingham, 59-63.

[4]   Cuomo, J.J., Ziegler, J.F. and Woodall, J.M. (1975) A New Concept for Solar Energy Thermal Conversion. Applied Physics Letters, 26, 557-560.
http://dx.doi.org/10.1063/1.87990

[5]   Kuar, H. and Kuar, P. (2013) An Alternative Treatment to Electropolishing: Chemical Polishing. Journal of Advance in Chemisty, 1, 1.

[6]   Min, H.L., Lim, N., Ruebusch, D.J., Jamshidi, A., Kapadia, R., Lee, R., Seok, T.J., Takei, K., Young Cho, K., Fan, Z., Jang, H., Wu, M., Cho, G. and Javey, A. (2011) Roll-to-Roll Anodization and Etching of Aluminum Foils for High-Throughput Surface Nanotexturing. Nano Letters, 11, 3425-3430.
http://dx.doi.org/10.1021/nl201862d

[7]   Vadim, V., Chang, H. and Miller, A. (1997) Pattern Formation during Electro-Polishing. Physical Review, 5, 56-59.

[8]   Annual Book of ASTM Standards, Vol. 03.01. 100 Barr Harbor Drive, West Conshohocken, 19428-2959.

[9]   Zhang, H., Maljkovic, N. and Mitchell, S. (2002) Structure and Interfacial Properties of Nanocrystalline Aluminum/ Mullite Composites. Material Science Engineering, A326, 317-323.
http://dx.doi.org/10.1016/S0921-5093(01)01500-3

[10]   Sudipto, P., Diso, D., Franza, S., Licciulli, A. and Rizzo, L. (2013) Spectrally Selective Absorber Coating from Transition Metal Complex for Efficient Photo-Thermal Conversion. Journal of Material Science, 48, 8268-8276.
http://dx.doi.org/10.1007/s10853-013-7639-4

[11]   Adelkhani, H., Nasoodi, S. and Jafari, A.H. (2009) A Study of the Morphology and Optical Properties of Electropolished Aluminum in the Vis-IR Region. International Journal of Electrochemical Science, 4, 238-246.

 
 
Top