GSC  Vol.5 No.4 , November 2015
A New Industrial Hydrogen Production Process
ABSTRACT
This study was proposed to develop a new method for hydrogen production in significant amounts. It consisted in using sulfur dioxide (SO2), and discharged from the sulfuric acid (H2SO4) production unit. This process could be considered as an alternative to many classical processes for air quality treatment resulting in as afer environment. Furthermore, it was an innovative method for hydrogen production. In fact, SO2 was fed into a PEM electrolyzer stack. The dissolved SO2 was oxidized at the anode which led to the production of sulfuric acid; whereas, hydrogen (H2) was produced at the cathode. This new method was able to treat 3.7 t/day of SO22 in order to produce 0.116 t/day of hydrogen and recover 5.6 t/day of 35 wt.% H2SO4. Results showed that the studied procedure was more economical in terms of energy consumption than the Westinghouse hybrid process. Hence, 67% of the energy needed for the decomposition step was reduced by our proposed process. After the presentation of the principles of the new process design, each part of the process was sized. The calculations showed that the number of electrolyzers could be calculated using the same formula used for the number of electrolyzers for water electrolysis or flux cell.

Cite this paper
Meddeb, Z. , Hajjem, H. , Mabrouk, A. and Jeday, M. (2015) A New Industrial Hydrogen Production Process. Green and Sustainable Chemistry, 5, 145-153. doi: 10.4236/gsc.2015.54018.
References
[1]   Bandyopadhyay, A. (2009) Comments on Removal of SO2 from Industrial Effluents by a Novel Twin Fluid Air-Assist Atomized Spray Scrubber. Industrial & Engineering Chemistry Research, 48, 5563-5564.
http://dx.doi.org/10.1021/ie800712a

[2]   Vidon, B. (1982) Calcul des réacteurs catalytiques: Production d’anhydride sulfurique, Technique de l’ingénieur, J4 030, 1-8.

[3]   Lodhi, M.A.K. (2004) Helio-Hydro and Helio-Thermal Production of Hydrogen. International Journal of Hydrogen Energy, 29, 1099-1113.
http://dx.doi.org/10.1016/j.ijhydene.2003.10.010

[4]   Busquet, S., Hubert, C.E., Labbé, J., Mayer, D. and Metkemeijer, R. (2004) A New Approach to Empirical Electrical Modelling of a Fuel Cell, an Electrolyser or a Regenerative Fuel Cell. Journal of Power Sources, 134, 41-48.

[5]   Ramaraja, P.K.S., Freire, F.J. and Weidner, J.W. (2006) Electrochemical Hydrogen Production from Thermochemical Cycles Using a Proton Exchange Membrane Electrolyzer. International Journal of Hydrogen Energy, 32, 463-468.

[6]   Sherif, S.A., Barbir F. and Veziroglu, T.N. (2005) Towards a Hydrogen Economy. The Electricity Journal, 18, 62-76.
http://dx.doi.org/10.1016/j.tej.2005.06.003

[7]   Naterer, G.F., Dincer, I. and Zamfirescu, C. (2013) Hydrogen Production from Nuclear Energy. Springer-Verlag, London.
http://dx.doi.org/10.1007/978-1-4471-4938-5_2

[8]   Yan, X.L. and Hino, R. (2011) Nuclear Hydrogen Production Handbook. CRC Press.

[9]   Gorensek, M.B., Staser, J.A., Stanford, T.G. and Weidner, J.W. (2009) A Thermodynamic Analysis of the SO2/H2SO4 System in SO2-Depolarized Electrolysis. International Journal of Hydrogen Energy, 34, 6089-6095.
http://dx.doi.org/10.1016/j.ijhydene.2009.06.020

[10]   Gorensek, M.B. and Summers, W.A. (2009) Hybrid Sulfur Flowsheets Using PEM Electrolysis and a Bayonet Decomposition Reactor. International Journal of Hydrogen Energy, 34, 4097-4114.
http://dx.doi.org/10.1016/j.ijhydene.2008.06.049

[11]   Gorensek, M.B. (2011) Hybrid Sulfur Cycle Flow Sheets for Hydrogen Production Using High-Temperature Gas-Cooled Reactors. International Journal of Hydrogen Energy, 36, 12725-12741.

[12]   Lee, B.J., NO, H.C., Yoon, H.J., Kim, S.J. and Kim, E.S. (2008) An Optimal Operating Window for the Bunsen Process in the I-S Thermochemical Cycle. International Journal of Hydrogen Energy, 33, 2200-2210.
http://dx.doi.org/10.1016/j.ijhydene.2008.02.045

[13]   Steinmetz, D., Routie, R. and Vialaron, A.C. (1979) Production d’hydrogène au moyen d’un cycle thermo-électro-chimique mettant en oeuvre l’énergie solaire. Revue de Physique Appliquée, 14, 153.

[14]   Kiss, A.A., Bildea, C.S. and Verheijen, P.J.T. (2006) Optimization Studies in Sulfuricacid Production. Computer Aided Chemical Engineering, 21, 737-742.

[15]   Staser, J.A. and Weidner, J.W. (2009) Effect of Water Transport on the Production of Hyrogen and Sulfuric Acid in a PEM Electrolyzer. Journal of the Electrochemical Society, 156, B16-B21.
http://dx.doi.org/10.1149/1.3001923

[16]   Staser, J.A. and Weidner, J.W. (2009) Sulfur Dioxyde Crossover during the Production of Hydrogen and Sulfuric Acid in a PEM Electrolyzer. Journal of the Electrochemical Society, 156, B836-B841.

[17]   Staser, J.A., Norman, K., Fujimoto, C.H., Hickner, M.A. and Weidner, J.W. (2009) Transport Properties and Performance of Polymer Electrolyte Membrane for the Hybrid Sulfur Electrolyzer. Journal of the Electrochemical Society, 156, B842-B847.
http://dx.doi.org/10.1149/1.3129676

[18]   Shaw, A.C., Romero, M.A., Elder, R.H., Ewan, B.C.R. and Allen, R.W.K. (2011) Measurements of the Solubility of Sulphur Dioxide in Water for the Suphur Family of Thermochemical Cycles. International Journal of Hydrogen Energy, 36, 4749-4756.
http://dx.doi.org/10.1016/j.ijhydene.2011.01.105

[19]   Busquet, S. (2003) Etude d’un Système Autonome de Production d’Energie Couplant unChamp Photovolta?que, un Electrolyseur et une Pileà Combustible: Réalisation d’un Banc D’Essai etModélisation. Mémoire de thèse de Doctorat, Ecole des Mines, Paris.

 
 
Top