Back
 AJAC  Vol.6 No.11 , October 2015
Highly Efficient Extraction of Cadmium(II) in Nitrate Medium by Quarternary Ammoniums
Abstract: The solvent extraction of cadmium(II) from nitrate medium was studied. The using extractants were quaternary ammonium-based room temperature ionic liquid Aliquat 336 in either the chloride [(C8H17)3 CH3N+·Cl-], thiocyanate [(C8H17)3CH3N+·SCN-] and hydrogenophosphate forms, diluted in the kerosene. The effects of different parameters such as equilibration time, initial pH, O/A molar ratio (nextractant/nCd), initial extractant concentration and ionic strong on extraction of cadmium(II) were investigated. The extraction yields of cadmium(II) increase with increasing initial pH and initial extractant concentration. The stoichiometry of the extracted species was determined on the basis of slope analysis. The effect of various salts such as KSCN and NaNO3 in the feed solution within the concentrations of 10 to 100 mM on extraction of cadmium(II) was studied at optimal initial pH = 6.2. The relation between the percentages of the extracted species () and the extraction yields were investigated by a calculation program using CHEAQS V. L20.1. The results showed that the decrease of the extraction yield of Cd(II) was related with the decrease gradually of percentage of cadmium(II) free and the increase of percentage of and species with the addition of KSCN. More the hydrophobic character of the extractant is high, more the extraction is better. The metal ion was stripped out satisfactorily using nitric acid as stripping agent, in one step.
Cite this paper: Guezzen, B. and Didi, M. (2015) Highly Efficient Extraction of Cadmium(II) in Nitrate Medium by Quarternary Ammoniums. American Journal of Analytical Chemistry, 6, 898-910. doi: 10.4236/ajac.2015.611085.
References

[1]   Larison, J.R., Likens, G.E., Fitzpatrick, J.W. and Crock, G. (2000) Cadmium Toxicity among Wildlife in the Colorado Rocky Mountains. Nature, 406, 181-183.
http://dx.doi.org/10.1038/35018068

[2]   Bernard, A. (2004) Renal Dysfunction Induced by Cadmium: Biomarkers of Critical Effects. Biometals, 17, 519-523.
http://dx.doi.org/10.1023/B:BIOM.0000045731.75602.b9

[3]   Barbier, O., Dauby, A., Jacquillet, G., Tauc, M., Poujeol, P. and Cougnon M. (2005) Zinc and Cadmium Interactions in a Renal Cell Line Derived from Rabbit Proximal Tubule. Nephron Physiology, 99, 74-84.
http://dx.doi.org/10.1159/000083413

[4]   Jarup, L. and Akesson, A. (2009) Current Status of Cadmium as an Environmental Health Problem. Toxicology and Applied Pharmacology, 238, 201-208.
http://dx.doi.org/10.1016/j.taap.2009.04.020

[5]   European Commission (2007) European Union Risk Assessment Report. Cadmium Metal and Oxide. CAS No. 7440-43-9.
http://publications.jrc.ec.europa.eu/repository/handle/111111111/10936

[6]   Xu, Y.P., Yang, L.S. and Yang, J.K. (2010) Removal of Cadmium (II) from Aqueous Solutions by Two Kinds of Manganese Coagulants. International Journal of Environmental Science and Technology, 2, 1-8.

[7]   Islamoglu, S., Yilmaz, L. and Ozbelge, H.O. (2006) Development of a Precipitation Based Separation Scheme for Selective Removal and Recovery of Heavy Metals from Cadmium Rich Electroplating Industry Effluents. Separation Science and Technology, 41, 3367-3385.
http://dx.doi.org/10.1080/01496390600851665

[8]   Lin, X., Burns, R.C. and Lawrance, G.A. (2005) Heavy Metals in Wastewater: The Effect of Electrolyte Composition on the Precipitation of Cadmium(II) Using Lime and Magnesia. Water, Air, & Soil Pollution, 165, 131-152.
http://dx.doi.org/10.1007/s11270-005-4640-9

[9]   Abderrahim, O., Ferrah, N., Didi, M.A. and Villemin, D. (2013) Sorption Efficiency of a New Sorbent towards Cadmium (II): Methylphosphonic Acid Grafted Polystyrene Resin. Journal of Chemistry, 2013, 10-20.

[10]   Kalfa, O.M., Yalcinkaya, O. and Türker, A.R. (2009) Synthesis of Nano B2O3/TiO2 Composite Material as a New Solid Phase Extractor and Its Application to Preconcentration and Separation of Cadmium. Journal of Hazardous Materials, 166, 455-461.
http://dx.doi.org/10.1016/j.jhazmat.2008.11.112

[11]   Marder, L., Guilherme, O.S., Andrea, M.B. and Jane, Z.F. (2003) Removal of Cadmium and Cyanide from Aqueous Solutions through Electrodialysis. Journal of the Brazilian Chemical Society, 14, 610-615.
http://dx.doi.org/10.1590/S0103-50532003000400018

[12]   Belkhouche, N., Didi, M.A., Romero, R., Jonsson, J.A. and Villemin, D. (2006) Study of New Organophosphorus Derivates Carriers on the Selective Recovery of M (II) and M (III) Metals, Using Supported Liquid Membrane Extraction. Journal of Membrane Science, 284, 398-405.
http://dx.doi.org/10.1016/j.memsci.2006.08.011

[13]   Belkhouche, N. and Didi, M.A. (2007) Flat Sheet Supported Liquid Membrane Extraction Using Organophosphorus Carriers. 2nd Ain Shams University International Conference on Environmental Engineering, Vol. IV, Caira, 10-12 April 2007, 363-373.

[14]   Medjahed, B., Didi, M.A. and Villemin, D. (2014) Factorial Design in Optimization of Extraction Procedure for Copper (II) Using Aliquat 336 and Trin-Butylphosphate Based Supported Liquid Membrane. Desalination and Water Treatment, 52, 3237-3245.
http://dx.doi.org/10.1080/19443994.2013.797626

[15]   Kumbasar, R.A. (2009) Extraction and Concentration Study of Cadmium from Zinc Plant Leach Solutions by Emulsion Liquid Membrane Using Trioctylamine as Extractant. Hydrometallurgy, 95, 290-296.
http://dx.doi.org/10.1016/j.hydromet.2008.07.001

[16]   Mortaheb, H.R., Kosuge, H., Mokhtarani, B., Amini, M.H. and Banihashemi, H.R. (2009) Study on Removal of Cadmium from Wastewater by Emulsion Liquid Membrane. Journal of Hazardous Materials, 165, 630-636.
http://dx.doi.org/10.1016/j.jhazmat.2008.10.039

[17]   Ahmad, A.L., Kusumastuti, A., Derek, C.J.C. and Ooi, B.S. (2012) Emulsion Liquid Membrane for Cadmium Removal: Studies on Emulsion Diameter and Stability. Desalination, 287, 30-34. http://dx.doi.org/10.1016/j.desal.2011.11.002

[18]   Amara-Rekkab, A. and Didi, M.A. (2015) Removal of Cd (II) and Hg(II) by Chelating Resin Chelex-100. Oriental Journal of Chemistry, 31, 205-214.
http://dx.doi.org/10.13005/ojc/310122

[19]   Bidari, E., Irannejad, M. and Gharabaghi, M. (2013) Solvent Extraction Recovery and Separation of Cadmium and Copper from Sulphate Solution. Journal of Environmental Chemical Engineering, 1, 1269-1274.
http://dx.doi.org/10.1016/j.jece.2013.09.016

[20]   Nogueira, C.A., Oliveira, P.C. and Pedrosa, F.M. (2009) Separation of Cadmium, Cobalt, and Nickel by Solvent Extraction Using the Nickel Salts of the Extractants. Solvent Extraction and Ion Exchange, 27, 295-311.
http://dx.doi.org/10.1080/07366290802672352

[21]   Kumar Jha, M., Gupta, D., Kumar Choubey, P., Kumar, V., Jeong, J. and Lee, J. (2014) Solvent Extraction of Copper, Zinc, Cadmium and Nickel from Sulfate Solution in Mixer Settler Unit (MSU). Separation and Purification Technology, 122, 119-127.
http://dx.doi.org/10.1016/j.seppur.2013.10.045

[22]   Villemin, D. and Didi, M.A. (2013) Extraction of Rare Earth and Heavy Metals, Using Ionic Solvents as Extraction Medium (A Review). Oriental Journal of Chemistry, 29, 1267-1284.
http://dx.doi.org/10.13005/ojc/290402

[23]   Pandey, S. (2006) Analytical Applications of Room Temperature Ionic Liquids: A Review of Recent Efforts. Analytica Chimica Acta, 556, 38-45.
http://dx.doi.org/10.1016/j.aca.2005.06.038

[24]   Abbott, A.P. and McKenzie, K.J. (2006) Application of Ionic Liquids to the Electrodeposition of Metals. Physical Chemistry Chemical Physics, 8, 4265-4279.
http://dx.doi.org/10.1039/b607329h

[25]   De Los Ríos, A.P., Hernández-Fernández, F.J., Alguacil, F.J., Lozano, L.J., Ginestá, A., García-Díaz, I., Sánchez-Segado, S., López, F.A. and Godínez, C. (2012) On the Use of Imidazolium and Ammonium-Based Ionic Liquids as Green Solvents for the Selective Recovery of Zn(II), Cd(II), Cu(II) and Fe(III) from Hydrochloride Aqueous Solutions. Separation and Purification Technology, 97, 150-157.
http://dx.doi.org/10.1016/j.seppur.2012.02.040

[26]   Kogelnig, D., Stojanovic, A., Galanski, M., Groessl, M., Jirsa, F., Krachler, R. and Keppler, B.K. (2008) Greener Synthesis of New Ammonium Ionic Liquids and Their Potential as Extracting Agents. Tetrahedron Letters, 49, 2782-2785.
http://dx.doi.org/10.1016/j.tetlet.2008.02.138

[27]   Castillo, J., Coll, M.T., Fortuny, A., Donoso, P.N., Sepúlveda, R. and Sastre, A.M. (2014) Cu(II) Extraction Using Quaternary Ammonium and Quaternary Phosphonium Based Ionic Liquid. Hydrometallurgy, 141, 89-96.
http://dx.doi.org/10.1016/j.hydromet.2013.11.001

[28]   Bell, T.J. and Ikeda, Y. (2012) Efficient Extraction of Rh(III) from Nitric Acid Medium Using a Hydrophobic Ionic Liquid. Dalton Transactions, 41, 4303-4305.
http://dx.doi.org/10.1039/c2dt30089c

[29]   Rout, A., Venkatesan, K.A., Srinivasan, T.G. and Vasudeva Rao, P.R. (2012) Ionic Liquid Extractants in Molecular Diluents: Extraction Behavior of Europium (III) in Quarternary Ammonium-Based Ionic Liquids. Separation and Purification Technology, 95, 26-31.
http://dx.doi.org/10.1016/j.seppur.2012.04.020

[30]   Villemin, D. and Didi, M.A. (2013) Extraction of Rare Earth and Heavy Metals, Using Ionic Solvents as Extraction Medium (A Review). Oriental Journal of Chemistry, 29, 1267-1284.
http://dx.doi.org/10.13005/ojc/290402

[31]   Zhang, D.L., Wang, W., Deng, Y.F., Zhang, J.P., Zhao, H. and Chen, J. (2012) Extraction and Recovery of Cerium(IV) and Fluorine(I) from Sulfuric Solutions Using Bifunctional Ionic Liquid Extractants. Chemical Engineering Journal, 179, 19-25.
http://dx.doi.org/10.1016/j.cej.2011.06.021

[32]   Didi, M.A. and Guezzen, B. (2014) Liquid-Liquid Extraction of Cd (II) by the 1-Methylimidazolium Di(2-Ethylhexyl) Phosphate Task Specific Ionic Liquid. Journal Catalyse Material Environnement, XI, 1-7.
http://www.amcemorocco.ma/index.html

[33]   Vogel, A.I. (1989) Book. In: Jeffery, G.H., Bassett, J., Mendham, J. and Denney, R.C., Eds., Vogel’s Textbook of Quantitative Chemical Analysis, 5th Edition, Longman Scientific and Technical, Harlow, 582.

[34]   Xiong, C.H., Yao, C.P., Wang, L. and Ke, J.J. (2009) Adsorption Behavior of Cd(II) from Aqueous Solutions onto Gel-Type Weak Acid Resin. Hydrometallurgy, 98, 318-324.
http://dx.doi.org/10.1016/j.hydromet.2009.05.008

[35]   Nayl, A.A. (2010) Extraction and Separation of Co(II) and Ni(II) from Acidic Sulfate Solutions Using Aliquat 336. Journal of Hazardous Materials, 173, 223-230.
http://dx.doi.org/10.1016/j.jhazmat.2009.08.072

[36]   Puigdomenech, I. (2006) HYDRA (Hydrochemical Equilibrium-Constant Database) and MEDUSA (Make Equilibrium Diagrams Using Sophisticated Algorithms) Programs. Royal Institute of Technology, Stockholm.
http://www.kemi.kth.se/medusa/

[37]   Leo, A., Hansch, C. and Elkins, D. (1971) Partition Coefficients and Their Uses. Chemical Reviews, 71, 525-616.
http://dx.doi.org/10.1021/cr60274a001

[38]   Nechab, B. and Villemin, D. (2000) Use of a New Hydrophilic Phosphine: DPPPA. Rapid and Efficient Heck Reaction in Aqueous Medium under Microwave Irradiation. Journal of Chemical Research, 2000, 429-431.

[39]   Viswanadhan, V.N., Ghose, A.K., Revankar, G.N. and Robins, R.K. (1989) Atomic Physicochemical Parameters for the Three Dimensional Structure Directed Quantitative Structure Relationships 4. Additional Parameters for Hydrophobic and Dispersive Interactions. Journal of Chemical Information and Computer Sciences, 29, 163-172.
http://dx.doi.org/10.1021/ci00063a006

[40]   Didi, M.A., Elias, A. and Villemin, D. (2002) Effect of Chain Length of Alkane-1-Hydroxy-1,1’-Methyldiphosphonics Acids on the Iron(III) Liquid-Liquid Extraction. Solvent Extraction and Ion Exchange, 30, 408-415.

[41]   Wionczyk, B. and Apostoluk, W.C. (2004) Solvent Extraction of Cr (III) from Alkaline Media with Quaternary Ammonium Compounds. Part II. Hydrometallurgy, 72, 195-203.
http://dx.doi.org/10.1016/S0304-386X(03)00139-7

 
 
Top