JSEMAT  Vol.5 No.4 , October 2015
Electrodeposition of Gold to Conformally Fill High-Aspect-Ratio Nanometric Silicon Grating Trenches: A Comparison of Pulsed and Direct Current Protocols
ABSTRACT
Filling high-aspect-ratio trenches with gold is a frequent requirement in the fabrication of X-ray optics as well as micro-electronic components and other fabrication processes. Conformal electrodeposition of gold in sub-micron-width silicon trenches with an aspect ratio greater than 35 over a grating area of several square centimeters is challenging and has not been described in the literature previously. A comparison of pulsed plating and constant current plating led to a gold electroplating protocol that reliably filled trenches for such structures.

Cite this paper
Znati, S. , Chedid, N. , Miao, H. , Chen, L. , Bennett, E. and Wen, H. (2015) Electrodeposition of Gold to Conformally Fill High-Aspect-Ratio Nanometric Silicon Grating Trenches: A Comparison of Pulsed and Direct Current Protocols. Journal of Surface Engineered Materials and Advanced Technology, 5, 207-213. doi: 10.4236/jsemat.2015.54022.
References
[1]   NIST (2011) X-Ray Form Factor, Attenuation and Scattering Tables.
http://physics.nist.gov/PhysRefData/FFast/html/form.html

[2]   Schattenburg, M.L., Aucoin, R.J., Fleming, R.C., Plotnik, I., Porter, J. and Smith, H.I. (1994) Fabrication of High- Energy X-Ray Transmission Gratings for the Advanced X-Ray Astrophysics Facility (AXAF). Proceedings of SPIE 2280, EUV, X-Ray, and Gamma-Ray Instrumentation for Astronomy V, San Diego, 16 September 1994, 181.
http://dx.doi.org/10.1117/12.186810

[3]   Noda, D., Tanaka, M., Shimada, K., Yashiro, W., Momose, A. and Hattori, T. (2008) Fabrication of Large Area Diffraction Grating Using LIGA Process. Microsystem Technolo-gies-Micro- and Nanosystems-Information Storage and Processing Systems, 14, 1311-1315.

[4]   David, C., Bruder, J., Rohbeck, T., Grunzweig, C., Kottler, C., Diaz, A., Bunk, O. and Pfeiffer, F. (2007) Fabrication of Diffraction Grat-ings for Hard X-Ray Phasecontrast Imaging. Microelectronic Engineering, 84, 1172-1177.
http://dx.doi.org/10.1016/j.mee.2007.01.151

[5]   Yun, W., Lai, B., Cai, Z., Maser, J., Legnini, D., Gluskin, E., Chen, Z., Krasnoperova, A.A., Vladimirsky, Y., Cerrina, F., Di Fabrizio, E. and Gentili, M. (1999) Nanometer Focusing of Hard X Rays by Phase Zone Plates. Review of Scientific Instrument, 70, 2238-2241.
http://dx.doi.org/10.1063/1.1149744

[6]   Gorelick, S., Vila-Comamala, J., Guzenko, V.A. and David, C. (2011) High Aspect Ratio Nanostructuring by High Energy Electrons and Electroplating. Microelectronic Engineering, 88, 2259-2262.
http://dx.doi.org/10.1016/j.mee.2011.02.094

[7]   Wojcik, M.J., Mancini, D.C., Divan, R. and Ocola, L.E. (2014) X-Ray Zone Plate with 25 Aspect Ratio Using a 2-μm-Thick Ultrananocrystalline Diamond Mold, Microsystems Technologies, 20, 2045-2050.
http://dx.doi.org/10.1007/s00542-013-2058-7

[8]   Paunovic, M. and Schlesinger, M. (2011) Modern Electroplat-ing. 5th Edition, John Wiley and Sons, Hoboken.

[9]   Oskam, G. and Searson, P. (2000) Electrochemical Nucleation and Growth of Gold on Silicon. Surface Science, 446, 103-111.
http://dx.doi.org/10.1016/S0039-6028(99)01113-9

[10]   Nielsch, K., Muller, F., Li, A. and Gosele, U. (2000) Uniform Nickel Deposition into Ordered Alumina Pores by Pulsed Electrodeposition. Advanced Materials, 12, 582.
http://dx.doi.org/10.1002/(SICI)1521-4095(200004)12:8<582::AID-ADMA582>3.0.CO;2-3

[11]   Cheh, H.Y. (1971) Electrodeposition of Gold by Pulsed Current. Journal of the Electrochemical Society, 118, 551-557.
http://dx.doi.org/10.1149/1.2408110

[12]   Jankowski, A. (2006) Modeling Nanocrystalline Grain Growth during the Pulsed Electrodeposition of Gold-Copper. ECS Transactions, 1, 1-9.
http://dx.doi.org/10.1149/1.2214579

[13]   Miao, H.X., Gomella, A.A., Chedid, N., Chen, L. and Wen, H. (2014) Fabrication of 200 nm Period Hard X-Ray Phase Gratings. Nano Letters, 14, 3453-3458.
http://dx.doi.org/10.1021/nl5009713

[14]   Raub, C.J. and Knodler, A. (1977) The Electrodeposition of Gold by Pulse Plating. Gold Bulletin, 10, 38-44.
http://dx.doi.org/10.1007/BF03215426

[15]   Josell, D. and Moffat, T.P. (2013) Superfilling Damascene Trenches with Gold in a Sulfite Electrolyte. Journal of the Electrochemical Society, 160, D3009-D3014.
http://dx.doi.org/10.1149/2.003312jes

[16]   Seah, C.H., Mridha, S. and Chan, L.H. (2001) DC/Pulse Plating of Copper for Trench/via Filling. Journal of Materials Processing Technology, 114, 233-239.
http://dx.doi.org/10.1016/S0924-0136(01)00614-8

[17]   Chandrasekar, M.S. and Pushpavanam, M. (2008) Pulse and Pulse Reverse Plating—Conceptual Advantages and Applications. Electrochimica Acta, 53, 3313-3322.
http://dx.doi.org/10.1016/j.electacta.2007.11.054

[18]   Wen, H., Gomella, A.A., Patel, A., Lynch, S.K., Morgan, N.Y., Anderson, S.A., Bennett, E.E., Xiao, X.H., Liu, C. and Wolfe, D.E. (2013) Subnanoradian X-Ray Phase-Contrast Using a Far-Field Interferometer of Nanometric Phase Gratings. Nature Communications, 4, Article No. 2659.
http://dx.doi.org/10.1038/ncomms3659

 
 
Top