JFCMV  Vol.3 No.4 , October 2015
Experimental Analysis of a Compressed Air Engine
Abstract: Nowadays, automobiles consume a large number of fossil fuels. However, the consumption of fossil fuels has brought many serious environmental problems, such as global warming, ozone layer depletion and fine particulate matter. To avoid such environmental problems, renewable energy has been applied to automobiles. In this paper, an air-powered engine of a renewable energy vehicle is introduced. To lay a foundation for the optimization of compressed air engine (CAE), a physical model of compressed air engine (CAE) is established with cam which controls compressed air charge or discharge cylinder. To obtain performance of the CAE, a prototype CAE system is set up. The output torque, power and efficiency are obtained through experimental study. The results show that the prototype of CAE has a good economic performance under low speed and when the supply pressure is 2 MPa, the maximum output power is 1.92 kW; the maximum output torque is 56.55 N·m; and the maximum efficiency is 25%. This research can be referred to in the optimization of air-powered engine.
Cite this paper: Yu, Q. and Cai, M. (2015) Experimental Analysis of a Compressed Air Engine. Journal of Flow Control, Measurement & Visualization, 3, 144-153. doi: 10.4236/jfcmv.2015.34014.

[1]   Salvi, B.L. and Subramanian, K.A. (2015) Sustainable Development of Road Transportation Sector Using Hydrogen Energy System. Renewable and Sustainable Energy Reviews, 51, 1132-1155.

[2]   Jr, A.O.P., Costa, R.C.D., Costa, C.D.V., et al. (2013) Perspectives for the Expansion of New Renewable Energy Sources in Brazil. Renewable and Sustainable Energy Reviews, 23, 49-59.

[3]   Chau, K.T. and Wong, Y.S. (2002) Overview of Power Management in Hybrid Electric-Vehicles. Energy Convers Manage, 45, 1953-1968.

[4]   Morita, K. (2002) Automotive Power Source in 21st Century. Journal of Society of Automotive Engineers of Japan, 24, 3-7.

[5]   Negre, et al. (2008) Engine with an Active Mono-Energy and/or Bi-Energy Chamber with Compressed Air and/or Additional Energy and Thermodynamic Cycle Thereof. US Patent, No.7469527B2.

[6]   MDI (Moteur Development International).

[7]   Knowlen, C., Williams, J., Mattick, A.T., et al. (2002) Quasi-Isothermal Expansion Engines for Liquid Nitrogen Automotive Propulsion.

[8]   Ordonez, C.A. (2000) Liquid Nitrogen Fueled, Closed Brayton Cycle Cryogenic Heat Engine. Energy Conversion and Management, 41, 331-341.

[9]   Tokhi, M.O., Al-Miskiry, M. and Brisland, M. (2001) Real Time Control of Air Motors Using a Pneumatic H-Bridge. Control Engineering Practice, 9, 449-457.

[10]   Xu, Q.Y., Cai, M.L. and Shi, Y. (2014) Dynamic Heat Transfer Model for Temperature Drop Analysis and Heat Exchange System Design of the Air-Powered Engine System. Energy, 68, 877-885.

[11]   Chen, P.L., Yu, X.L. and Liu, L. (2009) Simulation and Experimental Study Electro-Pneumatic Valve Used in Air- Powered Engine. Journal of Zhejiang University-SCIENCE A, 10, 377-383.

[12]   Shen, Y.T. and Hwang, Y.R. (2009) Design and Implementation of an Air-Powered Motorcycles. Applied Energy, 86, 1105-1110.

[13]   Huang, C.H., Hu, C.K., Yu, C.J., et al. (2013) Experimental Investigation on the Performance of a Compressed-Air Driven Piston Engine. Energies, 6, 1731-1745.

[14]   Cai, M.L., Kawashima, K. and Kagawa, T. (2006) Power Assessment of Flowing Compressed Air. Journal of Fluids Engineering, 128, 402-405.

[15]   Xu, Q.Y., Shi, Y., Yu, Q.H., et al. (2014) Virtual Prototype Modeling and Performance Analysis of the Air-Powered Engine. Journal of Mechanical Engineering Science, 228, 2642-2651.