OJFD  Vol.5 No.3 , September 2015
Mechanism of Generation and Collapse of a Longitudinal Vortex System Induced around the Leading Edge of a Delta Wing
Abstract: The purpose of the paper is to clarify the mechanism of generation and collapse of a longitudinal vortex system induced around the leading edge of a delta wing. CFD captured well characteristics of flow structure of the vortex system. It is found that the vortex system has a cone-shaped configuration, and both rotational velocity and vorticity have their largest values at the tip of the vortex and reduce downstream along the vortical axis. This resulted in inducing the largest negative pressure at the tip of the delta wing surface. The collapse of the vortex system was also studied. The system can still remain until the tip angle of 110 degrees. However, between 110 degrees and 120 degrees, the system becomes unstable. Over 120 degrees, the characteristics of the vortex are considered to have converted from the longitudinal vortex to the transverse one.
Cite this paper: Ogawa, S. and Takeda, J. (2015) Mechanism of Generation and Collapse of a Longitudinal Vortex System Induced around the Leading Edge of a Delta Wing. Open Journal of Fluid Dynamics, 5, 265-274. doi: 10.4236/ojfd.2015.53028.

[1]   Lighthill, M.J. (1952) On Sound Generated Aerodynamically I. General Theory. Proceedings of the Royal Society A, 211, 564-587.

[2]   Curle, N. (1955) The Influence of Solid Boundaries upon Aerodynamic Sound. Proceedings of the Royal Society A, 231, 505-514.

[3]   Howe, M.S. (2003) Theory of Vortex Sound: Cambridge Texts in Applied Mathematics. Cambridge University Press, Cambridge.

[4]   Howe, M.S. (2014) Acoustics and Aerodynamic Sound. Cambridge University Press, Cambridge.

[5]   Haruna, S., Nouzawa, T., Kamimoto, I. and Sato, H. (1990) An Experimental Analysis and Estimation of Aerodynamic Noise Using a Production Vehicle. SAE Transactions: Journal of Passenger Cars, 99.

[6]   Nouzawa, T., Li, Y. and Nakamura, T. (2011) Mechanism of Aerodynamic Noise Generated from Front-Pillar and Door Mirror of Automobile. Journal of Environment and Engineering, 6, 615-626.

[7]   Hamamoto,N., Okutsu,Y. and Yanagimoto, K. (2013) Investigation for the Effect of the External Noise Sources onto the Interior Aerodynamic Noise. Proceedings of SAE 2013 World Congress & Exhibition, Detroit, 16-18 April 2013.

[8]   Haruna, S., Hashiguchi, M., Kamimoto, I. and Kuwahara, K. (1992) Numerical Study of Aerodynamic Noise Radiated from a Three-Dimensional Wing. SAE Transactions: Journal of Passenger Cars, 101.

[9]   Takeda, J. and Ogawa, S. (2014) Prediction of Aerodynamic Noise Radiated from a Delta Wing. Proceedings of the 4th International Symposium on Technology for Sustainability, Taipei, 19-21 November 2014.

[10]   Ogawa, S. and Li, Y. (2014) Control of Longitudinal Vortex Generated around Front Pillar of Vehicles, Based on Clarification of the Vortex Generation Mechanism Using a Delta-Wing. Proceedings of the 12th International Conference on Motion and Vibration Control, Hokkaido, 3-7 August 2014.

[11]   Jacobi, A.M. and Shah, R.K. (1995) Heat Transfer Surface Enhancement through the Use of Longitudinal Vortices, A Review of Recent Progress. Experimental Thermal and Fluid Science, 11, 295-309.

[12]   Iwasaki, M., Hara, J. and Honda, I. (2014) Development of Vortex Generator for EGR Cooler. Proceedings of FISITA 2014 World Automotive Congress, Maastricht, 2-6 June 2014.

[13]   Ogawa, S. (1995) Aerodynamic Noise of a Body with Separated and Reattached Flow by Longitudinal Vortices. PhD Thesis, University of Tokyo, Tokyo.

[14]   Ogawa, S. (1995) Generation Mechanism of Aerodynamic Noise by Interference between Longitudinal Vortex and Body. Proceedings of the Japan National Congress for Applied Mechanics, 44, 215-220.