JMMCE  Vol.3 No.5 , September 2015
Physico-Chemical Characterization of Novel Epoxy Matrix System Reinforced with Recycled Short Milled Carbon Fibre
ABSTRACT
As received recycled short milled carbon fiber (SMCF) reinforced diglycidal ether of bisphenol-A (DGEBA) epoxy matrix materials have been developed by ultra-sonication mixing of SMCF in epoxy then curing at room temperature for nine days. The SMCF with mean diameter 7.5 μm, and length 100 - 300 μm, was used at different loadings i.e. 1, 2, 3, 5 and 10 wt%. Elemental analysis, surface chemistry and crystallography of SMCF were examined using X-ray fluorescence, X-ray photoelectron spectroscopy and X-ray diffraction. Fourier Transform IR spectroscopy confirmed that both in unmodified and SMCF-modified epoxies, 99% curing was achieved. Surface microhardness study showed a slight increase with 5% and 10% SMCF addition. Raman study confirms no structural change in SMCF after incorporation in epoxy. Also, a numerical modelling is implemented to correlate the density of the modified epoxy and SMCF volume fraction/distribution uniformity.

Cite this paper
Cholake, S. , Moran, G. , Bai, Y. , Raman, R. , Zhao, X. , Rizkalla, S. and Bandyopadhyay, S. (2015) Physico-Chemical Characterization of Novel Epoxy Matrix System Reinforced with Recycled Short Milled Carbon Fibre. Journal of Minerals and Materials Characterization and Engineering, 3, 373-389. doi: 10.4236/jmmce.2015.35040.
References
[1]   Shivamurthy, B., Udaya Bhat, K. and Anandhan, S. (2013) Mechanical and Sliding Wear Properties of Multi-Layered Laminates from Glass Fabric/Graphite/Epoxy Composites. Materials & Design, 44, 136-143. http://dx.doi.org/10.1016/j.matdes.2012.07.059

[2]   Myers, J.J. (2007) External Strengthening of Structures Using Fibre-Reinforced Polymer Composites In: Karbhari, V., Ed., Durability of Composites for Civil Structural Applications, Woodhead Publishing Limited, Cambs, 247-283. http://dx.doi.org/10.1533/9781845693565.2.247

[3]   Hollaway, L.C. (2010) A Review of the Present and Future Utilisation of FRP Composites in the Civil Infrastructure with Reference to Their Important In-Service Properties. Construction and Building Materials, 24, 2419-2445. http://dx.doi.org/10.1016/j.conbuildmat.2010.04.062

[4]   Dawood, M. and Rizkalla, S. (2010) Environmental Durability of a CFRP System for Strengthening Steel Structures. Construction and Building Materials, 24, 1682-1689.
http://dx.doi.org/10.1016/j.conbuildmat.2010.02.023

[5]   Bandyopadhyay, S. (1990) Review of the Microscopic and Macroscopic Aspects of Fracture of Unmodified and Modified Epoxy Resins. Materials Science and Engineering: A, 125, 157-184.
http://dx.doi.org/10.1016/0921-5093(90)90167-2

[6]   Low, I.M., Mai, Y.W., Bandyopadhyay, S. and Silva, V.M. (1987) New Toughened-Hybrid Epoxies. Materials Forum, 10, 6.

[7]   Wetzel, B., Rosso, P., Haupert, F. and Friedrich, K. (2006) Epoxy Nanocomposites—Fracture and Toughening Mechanisms. Engineering Fracture Mechanics, 73, 2375-2398.
http://dx.doi.org/10.1016/j.engfracmech.2006.05.018

[8]   Buggy, M., Farragher, L. and Madden, W. (1995) Recycling of Composite Materials. Journal of Materials Processing Technology, 55, 448-456. http://dx.doi.org/10.1016/0924-0136(95)02037-3

[9]   De Marco, I., Legarreta, J.A., Laresgoiti, M.F., Torres, A., Cambra, J.F., Chomón, M.J., Caballero, B. and Gondra, K. (1997) Recycling of the Products Obtained in the Pyrolysis of Fibre-Glass Polyester SMC. Journal of Chemical Technology & Biotechnology, 69, 187-192. http://dx.doi.org/10.1002/(SICI)1097-4660(199706)69:2<187::AID-JCTB710>3.0.CO;2-T

[10]   Pickering, S.J. (2006) Recycling Technologies for Thermoset Composite Materials—Current Status. Composites Part A: Applied Science and Manufacturing, 37, 1206-1215.
http://dx.doi.org/10.1016/j.compositesa.2005.05.030

[11]   Yang, S.M. (2009) Investigation into Recycling Carbon Fibre (Honours Project). University of Plymouth, Plymouth.

[12]   Ushikoshi, K., Nobuyuki, K. and Morihiko, S. (1995) Recycling of CFRP by Pyrolysis Method. Journal of the Society of Materials Science, Japan, 44, 428-431. http://dx.doi.org/10.2472/jsms.44.428

[13]   Chand, N. and Naik, A.M. (2008) Development and High Stress Abrasive Wear Behavior of Milled Carbon Fiber-Reinforced Epoxy Gradient Composites. Polymer Composites, 29, 736-744.
http://dx.doi.org/10.1002/pc.20450

[14]   Vasconcelos, P.V., Lino, F.J., Magalhaes, A. and Neto, R.J.L. (2005) Impact Fracture Study of Epoxy-Based Composites with Aluminium Particles and Milled Fibres. Journal of Materials Processing Technology, 170, 277-283. http://dx.doi.org/10.1016/j.jmatprotec.2005.05.006

[15]   Chand, N. and Nigrawal, A. (2008) Investigations on d.c. Conductivity Behaviour of Milled Carbon Fibre Reinforced Epoxy Graded Composites. Bulletin of Materials Science, 31, 665-668.
http://dx.doi.org/10.1007/s12034-008-0105-2

[16]   Cholake, S., Mada, M., Raman, R., Bai, Y., Zhao, X., Rizkalla, S. and Bandyopadhyay, S. (2014) Quantitative Analysis of Curing Mechanisms of Epoxy Resin by Mid- and Near-Fourier Transform Infra Red Spectroscopy. Defence Science Journal, 64, 314-321. http://dx.doi.org/10.14429/dsj.64.7326

[17]   Mcnally, T., Boyd, P., Mcclory, C., Bien, D., Moore, I., Millar, B., Davidson, J. and Carroll, T. (2008) Recycled Carbon Fiber Filled Polyethylene Composites. Journal of Applied Polymer Science, 107, 2015-2021.
http://dx.doi.org/10.1002/app.27253

[18]   Scheinbeim, J.I., Newman, B.A. and Sen, A. (1986) Field-Induced Crystallization in Highly Plasticized Poly(Vinylidene Fluoride) Films. Macromolecules, 19, 1454-1458. http://dx.doi.org/10.1021/ma00159a029

[19]   Benedetti, A., Cocco, G., Fagherazzi, G., Locardi, B. and Meriani, S. (1983) X-Ray Diffraction Methods to Determine Crystallinity and Preferred Orientation of Lithium Disilicate in Li-Zn-Silicate Glass-Ceramic Fibres. Journal of Materials Science, 18, 1039-1048. http://dx.doi.org/10.1007/BF00551972

[20]   Liu, Y., Xue, J.S., Zheng, T. and Dahn, J.R. (1996) Mechanism of Lithium Insertion in Hard Carbons Prepared by Pyrolysis of Epoxy Resins. Carbon, 34, 193-200.
http://dx.doi.org/10.1016/0008-6223(96)00177-7

[21]   Krumova, M., Klingshirn, C., Haupert, F. and Friedrich, K. (2001) Microhardness Studies on Functionally Graded Polymer Composites. Composites Science and Technology, 61, 557-563.
http://dx.doi.org/10.1016/S0266-3538(00)00228-1

[22]   Xie, Y. and Sherwood, P.M.A. (1990) X-Ray Photoelectron-Spectroscopic Studies of Carbon Fiber Surfaces. 11. Differences in the Surface Chemistry and Bulk Structure of Different Carbon Fibers Based on Poly(Acrylonitrile) and Pitch and Comparison with Various Graphite Samples. Chemistry of Materials, 2, 293-299. http://dx.doi.org/10.1021/cm00009a020

[23]   Jiang, G., Pickering, S.J., Lester, E.H., Turner, T.A., Wong, K.H. and Warrior, N.A. (2009) Characterisation of Carbon Fibres Recycled from Carbon Fibre/Epoxy Resin Composites Using Supercritical n-Propanol. Composites Science and Technology, 69, 192-198. http://dx.doi.org/10.1016/j.compscitech.2008.10.007

[24]   Jiang, G., Pickering, S.J., Walker, G.S., Wong, K.H. and Rudd, C.D. (2008) Surface Characterisation of Carbon Fibre Recycled Using Fluidised Bed. Applied Surface Science, 254, 2588-2593.
http://dx.doi.org/10.1016/j.apsusc.2007.09.105

[25]   Zhao, F. and Huang, Y. (2011) Grafting of Polyhedral Oligomeric Silsesquioxanes on a Carbon Fiber Surface: Novel Coupling Agents for Fiber/Polymer Matrix Composites. Journal of Materials Chemistry, 21, 3695. http://dx.doi.org/10.1039/c0jm03128c

[26]   Yip, H.L.H., Pickering, S.J. and Rudd, C.D. (2002) Characterisation of Carbon Fibres Recycled from Scrap Composites Using Fluidised Bed Process. Plastics, Rubber and Composites, 31, 278-282.
http://dx.doi.org/10.1179/146580102225003047

[27]   Semoto, T., Tsuji, Y., Tanaka, H. and Yoshizawa, K. (2013) Role of Edge Oxygen Atoms on the Adhesive Interaction between Carbon Fiber and Epoxy Resin. The Journal of Physical Chemistry C, 117, 24830-24835. http://dx.doi.org/10.1021/jp407835d

[28]   Kreling, S., Fischer, F., Delmdahl, R., Gabler, F. and Dilger, K. (2013) Analytical Characterization of CFRP Laser Treated by Excimer Laser Radiation. Lasers in Manufacturing, 41, 282-290.
http://dx.doi.org/10.1016/j.phpro.2013.03.080

[29]   Peijs, A.J.M., Catsman, P., Govaert, L.E. and Lemstra, P.J. (1990) Hybrid Composites Based on Polyethylene and Carbon Fibres Part 2: Influence of Composition and Adhesion Level of Polyethylene Fibres on Mechanical Properties. Composites, 21, 513-521.
http://dx.doi.org/10.1016/0010-4361(90)90424-U

[30]   Ko, Y.S., Forsman, W.C. and Dziemianowicz, T.S. (1982) Carbon Fiber-Reinforced Composites: Effect of Fiber Surface on Polymer Properties. Polymer Engineering and Science, 22, 805-814.
http://dx.doi.org/10.1002/pen.760221304

[31]   Hüttinger, K.J., Krekel, G. and Zielke, U. (1994) Evidence for Chemical Bond Formation between Surface Treated Carbon Fibres and High Temperature Thermoplastics. Journal of Applied Polymer Science, 51, 737-742. http://dx.doi.org/10.1002/app.1994.070510420

[32]   Gonzlez, M., Carlos, J. and Baselga, J. (2012) Applications of FTIR on Epoxy Resins—Identification, Monitoring the Curing Process, Phase Separation and Water Uptake. In: Theophile, D.T., Ed., Infrared Spectroscopy—Materials Science, Engineering and Technology, InTech, Rijeka, 261-284.
http://dx.doi.org/10.5772/36323

[33]   Smith, R.E., Larsen, F.N. and Long, C.L. (1984) Epoxy Resin Cure. II. FTIR Analysis. Journal of Applied Polymer Science, 29, 3713-3726. http://dx.doi.org/10.1002/app.1984.070291207

[34]   Finzel, M.C., Delong, J. and Hawley, M.C. (1995) Effect of Stoichiometry and Diffusion on an Epoxy-Amine Reaction Mechanism. Journal of Polymer Science Part A: Polymer Chemistry, 33, 673-689.
http://dx.doi.org/10.1002/pola.1995.080330409

[35]   Chike, K.E., Myrick, M.L., Lyon, R.E. and Angel, S.M. (1993) Raman and Near-Infrared Studies of an Epoxy Resin. Applied Spectroscopy, 47, 1631-1635. http://dx.doi.org/10.1366/0003702934334714

[36]   Nikolic, G., Zlatkovic, S., Cakic, M., Cakic, S., Lacnjevac, C. and Rajic, Z. (2010) Fast Fourier Transform IR Characterization of Epoxy GY Systems Crosslinked with Aliphatic and Cycloaliphatic EH Polyamine Adducts. Sensors (Basel), 10, 684-696. http://dx.doi.org/10.3390/s100100684

[37]   Poisson, N., Lachenal, G. and Sautereau, H. (1996) Near- and Mid-Infrared Spectroscopy Studies of an Epoxy Reactive System. Vibrational Spectroscopy, 12, 237-247. http://dx.doi.org/10.1016/0924-2031(96)00027-6

[38]   Strehmel, V. and Scherzer, T. (1994) Structural Investigation of Epoxy Amine Network by Mid and near Infra-Red Spectroscope. European Polymer Journal, 30, 361-368. http://dx.doi.org/10.1016/0014-3057(94)90300-X

[39]   Lapique, F. and Redford, K. (2002) Curing Effects on Viscosity and Mechanical Properties of a Commercial Epoxy Resin Adhesive. International Journal of Adhesion and Adhesives, 22, 337-346.
http://dx.doi.org/10.1016/S0143-7496(02)00013-1

[40]   Bandyopadhyay, S. (1982) A Study of the Volumetric Setting Shrinkage of Some Dental Materials. Journal of Biomedical Materials Research, 16, 135-144. http://dx.doi.org/10.1002/jbm.820160206

[41]   Tuinstra, F. (1970) Raman Spectrum of Graphite. The Journal of Chemical Physics, 53, 1126.
http://dx.doi.org/10.1063/1.1674108

[42]   Montes-Morán, M.A. and Young, R.J. (2002) Raman Spectroscopy Study of High-Modulus Carbon Fibres: Effect of Plasma-Treatment on the Interfacial Properties of Single-Fibre—Epoxy Composites. Carbon, 40, 857-875. http://dx.doi.org/10.1016/S0008-6223(01)00207-X

[43]   Darmstadt, H., Sümmchen, L., Ting, J.M., Roland, U., Kaliaguine, S. and Roy, C. (1997) Effects of Surface Treatment on the Bulk Chemistry and Structure of Vapor Grown Carbon Fibers. Carbon, 35, 1581-1585. http://dx.doi.org/10.1016/S0008-6223(97)00116-4

[44]   Kudin, K.N., Ozbas, B., Schniepp, H.C., Prud’homme, R.K., Aksay, I.A. and Car, R. (2008) Raman Spectra of Graphite Oxide and Functionalized Graphene Sheets. Nano Letters, 8, 36-41.
http://dx.doi.org/10.1021/nl071822y

[45]   Bal, S. (2010) Experimental Study of Mechanical and Electrical Properties of Carbon Nanofiber/Epoxy Composites. Materials & Design, 31, 2406-2413. http://dx.doi.org/10.1016/j.matdes.2009.11.058

[46]   Rajan, A.S., Sampath, S. and Shukla, A.K. (2014) An in Situ Carbon-Grafted Alkaline Iron Electrode for Iron-Based Accumulators. Energy & Environmental Science, 7, 1110.
http://dx.doi.org/10.1039/c3ee42783h

[47]   Mahanandia, P., Schneider, J.J., Engel, M., Stuhn, B., Subramanyam, S.V. and Nanda, K.K. (2011) Studies towards Synthesis, Evolution and Alignment Characteristics of Dense, Millimeter Long Multiwalled Carbon Nanotube Arrays. Beilstein Journal of Nanotechnology, 2, 293-301.
http://dx.doi.org/10.3762/bjnano.2.34

[48]   Kumar, V., Sonkawade, R.G., Chakarvarti, S.K., Singh, P. and Dhaliwal, A.S. (2012) Carbon Ion Beam Induced Modifications of Optical, Structural and Chemical Properties in PADC and PET Polymers. Radiation Physics and Chemistry, 81, 652-658. http://dx.doi.org/10.1016/j.radphyschem.2012.02.027

[49]   Mallick, B., Behera, R.C., Tiwari, T.N., Panigrahi, S. and Samal, S.K. (2008) X-Ray Diffraction and Raman Scattering Studies of Proton-Induced, Modified Polyethylene Terephthalate Microfiber. Radiation Effects and Defects in Solids, 163, 149-159. http://dx.doi.org/10.1080/10420150701640066

[50]   Khalaf, H.A., Mansour, S.E. and El-Madani, E.A. (2011) The Influence of Sulfate Contents on the Surface Properties of Sulfate-Modified Tin(IV) Oxide Catalysts. Journal of the Association of Arab Universities for Basic and Applied Sciences, 10, 15-20. http://dx.doi.org/10.1016/j.jaubas.2011.06.003

[51]   Manna, U., Richardson, R.M., Fukuda, A. and Vij, J.K. (2010) X-Ray Diffraction Study of Ferroelectric and Antiferroelectric Liquid Crystal Mixtures Exhibiting de Vries SmA*-SmC Transitions. Physical Review E, 81, Article ID: 050701.

[52]   Veeresh Kumar, G.B., Rao, C.S.P., Selvaraj, N. and Bhagyashekar, M.S. (2010) Studies on Al6061-SiC and Al7075- Al2O3 Metal Matrix Composites. Journal of Minerals & Materials Characterization & Engineering, 9, 43-55.

[53]   Baltá-Calleja, F.J.F.S. (2007) Microhardness of Polymers. Cambridge University Press, Cambridge.

[54]   Krumova, M., Fakirov, S., Calleja, F.J.B. and Evstatiev, M. (1998) Structure Development in PET/PA6 Microfibrillar- Reinforced Composites as Revealed by Revealed by Microhardness. Journal of Materials Science, 33, 2857-2868. http://dx.doi.org/10.1023/A:1017594021634

[55]   Balta Calleja, F.J., Santa Cruz, C., Sawatari, C. and Asano, T. (1990) New Aspects of the Microstructure of Polyethylene-Isotactic Polypropylene Gel Blends as Revealed by Microhardness: Influence of Composition. Macromolecules, 23, 5352-5355. http://dx.doi.org/10.1021/ma00228a008

 
 
Top