MSA  Vol.6 No.8 , August 2015
Study of Structural and Morphological Properties of Vacuum Coated Copper (Cu) Metal Thin Film
ABSTRACT
This study presented a technique to deposit high strength and highly conductive copper thin films on glass substrates at room temperature. In this work, Cu thin films with thicknesses ~500 nm have been deposited on glass substrate by thermal evaporation technique at room temperature. After deposition, these films have been annealed at 200°C for 10 - 40 minutes. The thickness and annealing effect on the structural and morphological properties were studied by X-ray diffraction (XRD) and scanning electron microscopy (SEM) respectively. The results showed that by increasing thickness the copper films crystallinity in (111) direction had been increased. Also by varying the annealing time the significant changes were observed in the films crystallinity and surface morphology.

Cite this paper
Alam, M. , Mia, M. , Hasan, R. , Shahinuzzaman, M. , Islam, M. and Uddin, K. (2015) Study of Structural and Morphological Properties of Vacuum Coated Copper (Cu) Metal Thin Film. Materials Sciences and Applications, 6, 753-759. doi: 10.4236/msa.2015.68077.
References
[1]   Arnaud, L., Tartavel, G., Berger, T., Mariolle, D., Gobil, Y. and Touet, I. (2000) Microstructure and Electromigration in Copper Damascene Lines. Microelectronics Reliability, 40, 77-86.
http://dx.doi.org/10.1016/S0026-2714(99)00209-7

[2]   Koetter, T.G., Wendrock, H., Schuehrer, H., Wenzel, C. and Wetzig, K. (2000) Relationship between Microstructure and Electromigration Damage in Unpassivated PVD Copper Damascene Interconnects. Microelectronics Reliability, 40, 1295-1299.
http://dx.doi.org/10.1016/S0026-2714(00)00140-2

[3]   Singh, J. and Wolfe, D.E. (2005) Review Nano and Macro-Structured Component Fabrication by Electron Beam-Physical Vapor Deposition (EB-PVD). Journal of Materials Science, 40, 1-26.
http://dx.doi.org/10.1007/s10853-005-5682-5

[4]   Ustinov, A.I., Movachan, B.A. and Polishchuk, S.S. (2004) Formation of Nanoquasicrystalline Al-Cu-Fe Coatings at Electron Beam Physical Vapour Deposition. Scripta Materialia, 50, 533-537.
http://dx.doi.org/10.1016/j.scriptamat.2003.10.025

[5]   Cullity, B.D. and Stock, S.R. (2001) Elements of X-Ray Diffraction. 3rd Edition, Prentice-Hall, Englewood Cliffs, 169.

[6]   Yeganeh, M. and Saremi, M. (2011) Deposition of Thin Film Copper Nanostructures by Electron Beam Physical Vapor Deposition Technique on SIO2/p-Type Si(100) and Study of Its Oxidation Behavior. International Journal of Modern Physics B, 25, 2567-2574.
http://dx.doi.org/10.1142/S0217979211101867

[7]   Jiang, H., Klemmer, T.J., Barnard, J.A., Doyle, W.D. and Payzant, E.A. (1997) Epitaxial Growth of Cu(111) Films on Si(110) by Magnetron Sputtering: Orientation and Twin Growth. Thin Solid Films, 315, 13-16.
http://dx.doi.org/10.1016/S0040-6090(97)00954-1

[8]   Smith, D. (1995) Thin Film Deposition: Principles and Practice. McGraw-Hill, Inc., New York.

 
 
Top