MSCE  Vol.3 No.8 , August 2015
Extraction and Modelling of Oil from Eucalyptus camadulensis by Organic Solvent
ABSTRACT
This work was conducted to study the extraction of eucalyptus oil from natural plants (Eucalyptus camadulensis leaves) by organic solvents. the effects of the main operating parameters were studied; type of solvent (n-hexane and ethanol), time to reach equilibrium, the temperature (45&degC to 65&degC) for n-hexane and (45&degC to 75&degC) for ethanol, solvent to solid ratio (5:1 to 8:1 (v/w)), agitation speed (0 to 900 rpm) and the particle size (0.5 to 2.5 cm) of fresh leaves to find the best processing conditions for the achieving maximum oil yield. The concentration of eucalyptus oil in solvent was measured by using UV-spectrophotometer. The results (for n-hexane) showed that the agitation speed of 900 rpm, temperature 65&degC with solvent to solid ratio 7:1 (v/w) of particle size 0.5 cm for 210 minute give the highest value of oil (68.5 wt%). Similar conditions for ethanol with the exception of the temperature (75&degC) give the highest yield of oil (65.07 wt%).

Cite this paper
Abed, K. , Kurji, B. and Abdul-Majeed, B. (2015) Extraction and Modelling of Oil from Eucalyptus camadulensis by Organic Solvent. Journal of Materials Science and Chemical Engineering, 3, 35-42. doi: 10.4236/msce.2015.38006.
References
[1]   Abdul-Majeed, B.A., Hassan, A.A. and Kurji, B.M. (2013) Extraction of Oil from Eucalyptus Camadulensis Using Water Distillation Method. Iraqi Journal of Chemical and Petroleum Engineering, 14, 7-12.

[2]   Sadlon, A.E. and Lamson, D.W. (2010) Immune-Modifying and Antimicrobical Effects of Eucalyptus Oil and Simple Inhalation Devices. Alternative Medicine Review, 15, 33-47.

[3]   Handa, S., Khanuja, S.P., Longo, G. and Rakesh, D.D. (2008) Extraction Technologies for Medicinal and Aromatic Plants. United Nations Industrial Development Organization and the International Centre for Science and High Technology, 260 p.

[4]   Jiangxi Province Jishui County Hongda Natural Perfume Co. (2010) Data sheet of Eucalyptol.

[5]   Coulson, J.M. and Richardson, J.F. (2002) Chemical Engineering. 5th Edition.

[6]   http://en.wikipedia.org/wiki/Fragrance_extraction

[7]   Sayyar, S., Abidin, Z.Z., Yunus, R. and Muhammad, A. (2009) Extraction of Oil from Jatropha Seeds-Optimization and Kinetics. American Journal of Applied Sciences, 6, 1390-1395.
http://dx.doi.org/10.3844/ajassp.2009.1390.1395

[8]   Abdul-Nabi, M. (2011) Extraction of Valuable Metals from Spent Hydrodesulfurization Catalyst by Two Stage Leaching Method. MSc. Thesis, Chemical Engineering Department of the College of Engineering, University of Baghdad, Baghdad.

[9]   Saxena, D.K., Sharma, S.K. and Sambi, S.S. (2011) Comparative Extraction of Cottonseed Oil by N-Hexane and Ethanol. ARPN Journal of Engineering and Applied Sciences, 6, 84-89.

[10]   Mindaryani, A. and Rahayu, S. (2007) Essential Oil from Extraction and Steam Distillation Ocimum Basillicum. Jour- nal of WCECS.

 
 
Top