ENG  Vol.7 No.7 , July 2015
Estimation of Settlement under Shallow Foundation for Different Regions in Iraq Using SAFE Software
Abstract: Foundation design must satisfy limited values of settlement. Settlement is an essential criterion in the design process of shallow foundations. To calculate the settlement under different types of shallow foundations, 79 samples were taken from twenty-three sites distributed in three regions: Mosul, Baghdad and Basrah in the northern, central and southern parts of Iraq. Field and laboratory tests were performed to obtain the strength parameters to calculate the bearing capacity. The results obtained for the bearing capacity were used in SAFE software. The software was used to design and analyze the foundation and to calculate the settlements under two types of foundations (raft and continuous) for the three regions. Average and minimum values of bearing capacity were used. The software used subgrade reaction modules values for the design and analysis. According to the results, the suitable, safe and economical type of foundation to be used in Mosul, Baghdad and Basrah regions for the average value of bearing capacity is the continuous type for the first two regions while the raft type is recommended for Basrah region. In case that the minimum bearing capacity values are used, raft foundation is recommended for Mosul and Baghdad. While deep foundation is the suitable type of foundation for Basrah region.
Cite this paper: Al-Taie, E. , Al-Ansari, N. and Knutsson, S. (2015) Estimation of Settlement under Shallow Foundation for Different Regions in Iraq Using SAFE Software. Engineering, 7, 379-386. doi: 10.4236/eng.2015.77034.

[1]   Shahin, M.A., Jaksa, M.B. and Maier, H.R. (2000) Predicting the Settlement of Shallow Foundations on Cohesionless Soils Using Back-Propagation Neural Networks. Research Report No. R 167, University of Adelaide, Adelaide.

[2]   The CITADEL (2010) CIVL410 Geotechnical Engineering II-Shallow Foundations.

[3]   Salgado, R. (2013) Settlement and Serviceability, Piling Engineering.

[4]   Osman, A.S. and Bolton, M.D. (2004) A New Approach to the Estimation of Undrained Settlement of Shallow Foundations on Soft Clay. Engineering Practice and Performance of Soft Deposits, IS-OSAKA, 93-98.

[5]   Buringh, P. (1960) Soils and Soil Condition in Iraq. Ministry of Agriculture, Baghdad.

[6]   Jassim, S.Z. and Goff, J.C. (2006) Geology of Iraq. Dolin, Prague and Moravian Museum, Brno.

[7]   Al-Taie, E., Al-Ansari, N., Knutsson, S. and Saaed, T.E. (2013) Foundation Assessment in Different Parts of Iraq Using STAAD Pro V8i. Journal of Civil Engineering and Architecture, 7, 273-281.

[8]   Mahmood, R.A., Al-Marsomy, A.H. and Mohammad Ali, A.A. (2011) Study of Gypsum Content of Soils at Selected Sites in Basrah Governorate South of Iraq for Engineering Purposes. Journal of Basrah Researches (Sciences), 37, 10-21.

[9]   Muttashar, W.R. (2010) Some Geotechnical Soil Properties of Western Bank of Khor Al-Zubair Channel Coast at Khor Al-Zubair Port Location, Southern Basrah, Iraq. Mesopotamian Journal and Marian Science, 25, 124-133.

[10]   Al-Taie, E., Al-Ansari, N., Saaed, T.E. and Knutsson, S. (2014) Bearing Capacity Affecting the Design of Shallow Foundation in Various Regions of Iraq Using SAP200 & SAFE Softwares. Journal of Earth Sciences and Geotechnical Engineering, 4, 35-52.

[11]   Das, M.B. (2010) Principle of Geotechnical Engineering. 7th Edition, Cengage Learning, Stamford.

[12]   Key Features and Terminology (2009) SAFE Design of Slabs, Beams and Foundations Reinforced and Post-Tensioned concrete. Computers & Structures, Inc., Berkeley.

[13]   Computers and Structures, Inc. (2013) CSI Analysis Reference Manual. Berkley, California.

[14]   Rajpurohit, V.K., Gore, N.G. and Sayagavi, V.G. (2014) Analysis of Structure Supported on Elastic Foundation. International Journal of Engineering and Advanced Technology (IJEAT), 4, 1-6.