WJM  Vol.1 No.3 , June 2011
An Investigation into the Effect of Porous Medium on Performance of Heat Exchanger
ABSTRACT
In this paper, a detailed numerical investigation of two-dimensional laminar forced convection in a porous channel with inlet and outlet slot is presented. A uniform heat flux is applied on one wall of channel and another wall is isolated. The flow in the porous medium is modeled using the Brinkman-Forchheimer-extended Darcy model in which the inertia and boundary effects are taken into consideration and thermal dispersion effects are not included in the energy equation. Parametric studies are conducted to evaluate the effects of particle diameter, Reynolds number on the heat transfer and friction factor. Nusselt number and friction factor are developed for efficient design of a porous heat exchanger based on the present configuration. In order to solve this problem Fluent software was used.

Cite this paper
nullH. Dehghan and P. Aliparast, "An Investigation into the Effect of Porous Medium on Performance of Heat Exchanger," World Journal of Mechanics, Vol. 1 No. 3, 2011, pp. 78-82. doi: 10.4236/wjm.2011.13011.
References
[1]   M. L. Hunt and C. L. Tien, “Effect of Thermal Dispersion on Forced Convection in Fibrous Media,” International Journal of Heat Mass Transfer, Vol. 31, No. 2, 1988, pp. 301-309. doi:10.1016/0017-9310(88)90013-0

[2]   T. M. Kuzay, J. T. Collins and A. M. Khounsary, “Enhanced Heat Transfer with Metal-Wood-Filled Tubes,” Proceedings of ASME/JSEM Thermal Engineering Conference, 1991, pp. 451-459.

[3]   G. J. Hwang and C. H. Chao, “Heat Transfer Measurement and Analysis for Sintered Porous Channels,” Journal of Heat Transfer, ASME Transactions, Vol. 116, No. 2, 1994, pp. 456-464. doi:10.1115/1.2911418

[4]   A. Hadim, “Forced Convection in a Porous Channel with Localized Heat Sources,” Journal of Heat Transfer, ASME Transactions, Vol. 116, No. 2, 1994, pp. 465-472. doi:10.1115/1.2911419

[5]   K. Vafai, “Analysis of Forced Convection Enhancement in a Channel Using Porous Block,” AIAA Journal of Thermophysics and Heat Transfer, Vol. 8, pp. 563-573.

[6]   M. Sozen and K. Vafai, “Longitudinal Heat Dispersion in Porous Beds,” AIAA Journal of Heat Transfer, pp. 153-157.

[7]   H. Chen and A. Hadim, “Numerical Study of Non-Darcy Forced Convection in a Packed Bed Saturated with Power –Law Fluid,” Journal of Porous Media, Vol. 1, No. 2, 1998, pp. 147-157.

[8]   K. C. Leong, H. Y. Li, L. W. Jin and J. C. Chai, “Numerical and Experimental Study of Forced Convection in Graphite Foams,” Thermal Engineering, Vol. 30, No. 5, 2010, pp. 520-532. doi:10.1016/j.applthermaleng.2009.10.014

[9]   M. B. Saito and M. J. S. de Lemos, ”Laminarheat Transfer in a Porous Channel Simulated with a Two-Energy Equation Model,” International Communications in Heat and Mass Transfer, Vol. 36, No. 10, 2009, pp. 1002- 1007. doi:10.1016/j.icheatmasstransfer.2009.07.008

 
 
Top