OJMetal  Vol.5 No.2 , June 2015
Corrosion Behaviour of TiC-Reinforced Hadfield Manganese Austenitic Steel Matrix In-Situ Composites
The corrosion behaviour of Hadfield manganese austenitic steel matrix composite reinforced with the varying amount of TiC and unreinforced Hadfield manganese austenitic steel matrix alloy has been evaluated in 3.5% NaCl aqueous solution with the pH value of 6 by the potentiodynamic polarization curves and linear polarization resistance measurements at a scan rate of 1 mV/s at room temperature (25°C ± 2°C). The corrosion rate of the composites is higher than that of their unreinforced matrix alloy and it increases with the increasing volume fraction of TiC. The poor corrosion resistance of the composites can be attributed to the galvanic effects between the matrix and reinforcement.

Cite this paper
Srivastava, A. and Das, K. (2015) Corrosion Behaviour of TiC-Reinforced Hadfield Manganese Austenitic Steel Matrix In-Situ Composites. Open Journal of Metal, 5, 11-17. doi: 10.4236/ojmetal.2015.52002.
[1]   Rai, V.K., Srivastava, R., Nath, S.K. and Ray, S. (1999) Wear in Cast Titanium Carbide Reinforced Ferrous Composites under Dry Sliding. Wear, 231, 265-271.

[2]   Vallauri, D., Atías Adrián, I.C. and Chrysanthou, A. (2008) TiC-TiB2 Composites: A Review of Phase Relationships, Processing and Properties. Journal of the European Ceramic Society, 28, 1697-1713.

[3]   Wang, H.Y., Jiang, Q.C., Ma, B.X., Wang, Y. and Zhao, F. (2005) Reactive Infiltration Synthesis of TiB2-TiC Particulates Reinforced Steel Matrix Composites. Journal of Alloys and Compounds, 391, 55-59.

[4]   Wang, Y., Zhang, Q., Wang, Y., Ma, B.X. and Jiang, Q.C. (2006) Effect of Fe Content in Fe-Ti-B System on Fabricating TiB2 Particulate Locally Reinforced Steel Matrix Composites. Materials Science and Engineering, 422, 339-345.

[5]   Trueman, A., Schweinsberg, D.P. and. Hope, G.A (1997) The Matrix Corrosion of Tungsten Carbide/Carbon Steel Metal Matrix Composites. Corrosion Science, 39, 1153-1164.

[6]   Lo, K.H., Kwok, C.T., Cheng, F.T. and Man, H.C. (2003) Corrosion Resistance of Laser-Fabricated Metal-Matrix Composite Layer on Stainless Steel 316L. Journal of Laser Applications, 15, 107-114.

[7]   Pagounis, E. and Lindroos, V.K. (1998) Processing and Properties of Particulate Reinforced Steel Matrix Composites. Materials Science and Engineering, 246, 221-234.

[8]   Debata, M. and Upadhyaya, G.S. (2001) Corrosion Behavior of Powder Metallurgy Y2O3 Dispersed Iron-and Nickel-Base Superalloys. Journal of Materials Engineering and Performance, 10, 602-607.

[9]   Stearn, M. (1958) The Mechanism of Passivating—Type Inhibitors. Journal of the Electrochemical Society, 105, 638- 647.

[10]   Nath, D. and Namboodhirt, T.K.G. (1989) Corrosion Science 29, 1215-1229.

[11]   Nunes, P.C.R. and Ramanathan, L.V. (1995) Some Corrosion Characteristics of Aluminium-Mica Particulate Composites. Corrosion, 51, 610-617.

[12]   Shimizu, Y., Nishimura, T. and Matsushima, I. (1995) Corrosion Resistance of Al-Based Metal Matrix Composites. Materials Science and Engineering, 198, 113-118.