WJM  Vol.5 No.6 , June 2015
Numerical Modeling of Non-Similar Mixed Convection Heat Transfer over a Stretching Surface with Slip Conditions
ABSTRACT
In this paper, the heat transfer effect on the steady boundary layer flow of a Casson fluid past a stretching surface in the presence of slip conditions was analyzed. The stretching surface is maintained at a constant temperature. The boundary layer conservation equations, which are parabolic in nature, are normalized into non-similar form and then solved numerically with the well-tested, efficient, implicit, stable Keller-box finite difference scheme. The resulting equations are solved numerically by using the Kellerbox finite-difference method, and the expressions for velocity and temperature are obtained. They satisfy all imposed initial and boundary conditions and reduce to some well-known solutions for non-Newtonian fluids. Numerical results for velocity, temperature, skin friction and Nusselt number are shown in various graphs and discussed for embedded flow parameters. It is found that both velocity and temperature decrease with an increase of the Casson fluid parameter.

Cite this paper
Rao, A. , Prasad, V. , Nagendra, N. , Murthy, K. , Reddy, N. and Beg, O. (2015) Numerical Modeling of Non-Similar Mixed Convection Heat Transfer over a Stretching Surface with Slip Conditions. World Journal of Mechanics, 5, 117-128. doi: 10.4236/wjm.2015.56013.
References
[1]   Sakiadis, B.C. (1961) Boundary-Layer Behavior on Continuous Solid Surfaces: I. Boundary-Layer Equations for Two- Dimensional and Axisymmetric Flow. AIChE Journal, 7, 26-28.
http://dx.doi.org/10.1002/aic.690070108

[2]   Sakiadis, B.C. (1961) Boundary-Layer Behavior on Continuous Solid Surfaces: II. Boundary-Layer Equations on a Continuous Flat Surface. AIChE Journal, 7, 221-225.
http://dx.doi.org/10.1002/aic.690070211

[3]   Erickson. L.E., Fan. L.T. and Fox, V.G. (1966) Heat and Mass Transfer on Moving Continuous Flat Plate with Suction or Injection. Industrial Engineering Chemistry Fundamentals, 5, 19-25.

[4]   Gireesha, B.J., Roopa, G.S. and Bagewadi, C.S. (2011) Boundary Layer Flow of an Unsteady Dusty Fluid and Heat Transfer over a Stretching Sheet with Non-Uniform Heat Source/Sink. Scientific Research, 3, 726-735. http://dx.doi.org/10.4236/eng.2011.37087

[5]   Chen, T.S. and Strobel, F.A. (1980) Buoyancy Effects in Boundary Layer Adjacent to a Continuous, Moving Horizontal Flat Plate. Journal of Heat Transfer, 102, 170-172.
http://dx.doi.org/10.1115/1.3244232

[6]   Grubka, L.J. and Bobba, K.M. (1985) Heat Transfer Characteristics of a Continuous, Stretching Surface with Variable Temperature. ASME J. Heat Transfer, 107, 248-250. http://dx.doi.org/10.1115/1.3247387

[7]   Dutta, B.K., Roy, P. and Gupta, A.S. (1985) Temperature Field in Flow over a Stretching Surface with Uniform Heat Flux. International Communications in Heat and Mass Transfer, 12, 89-94.
http://dx.doi.org/10.1016/0735-1933(85)90010-7

[8]   Chen, C.K. and Char, M.I. (1988) Heat Transfer of a Continuous Stretching Surface with Suction or Blowing. Journal of Mathematical Analysis and Applications, 135, 568-580.
http://dx.doi.org/10.1016/0022-247X(88)90172-2

[9]   Karwe, M.V. and Jaluria, Y. (1988) Fluid Flow and Mixed Convection Transport from a Moving Plate in Rolling and Extrusion Processes. ASME J. Heat Transfer, 110, 655-661.
http://dx.doi.org/10.1115/1.3250542

[10]   Karwe, M.V. and Jaluria, Y. (1991) Numerical Simulation of Thermal Transport Associated With a Continuously Moving Flat Sheet in Materials Processing. ASME J. Heat Transfer, 113, 612-619.
http://dx.doi.org/10.1115/1.2910609

[11]   Patil, P.M., Roy, S. and Pop, I. (2010) Unsteady Mixed Convection Flow over a Vertical Stretching Sheet in a Parallel Free Stream with Variable Wall Temperature. International Journal of Heat and Mass Transfer, 53, 4741-4748. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2010.06.018

[12]   Rajeswari, V., Kumari, M. and Nath, G. (1993) Unsteady Three-Dimensional Boundary Layer Flow Due to a Stretching Surface. Actamechanica, 98, 123-141.

[13]   Ali, M. and Al-Yousef, F. (2002) Laminar Mixed Convection Boundary Layers Induced by a Linearly Stretching Permeable Surface. International Journal of Heat and Mass Transfer, 45, 4241-4250.
http://dx.doi.org/10.1016/S0017-9310(02)00142-4

[14]   Partha, M.K., Murthy, P.V.S.N. and Rajasekhar, G.P. (2005) Effect of Viscous Dissipation on the Mixed Convection Heat Transfer from an Exponentially Stretching Surface. Heat and Mass Transfer, 41, 360-366. http://dx.doi.org/10.1007/s00231-004-0552-2

[15]   Schowalter, W.R. (1978) Mechanics of Non-Newtonian Fluids. Pergamon Press, New York.

[16]   Rana, P. and Bhargava, R. (2012) Flow and Heat Transfer of a Nanofluid over a Nonlinearly Stretching Sheet: A Numerical Study. Communications in Nonlinear Science and Numerical Simulation, 17, 212-226. http://dx.doi.org/10.1016/j.cnsns.2011.05.009

[17]   Nazar, M., Fetecau, C., Vieru, D. and Fetecau, C. (2010) New Exact Solutions Corresponding to the Second Problem of Stokes for Second Grade Fluids. Nonlinear Analysis: Real World Applications, 11, 584-591. http://dx.doi.org/10.1016/j.nonrwa.2008.10.055

[18]   Fetecau, C., Hayat, T., Zierep, J. and Sajid, M. (2011) Energetic Balance for the Rayleigh—Stokes problem of an Oldroyd-B fluid. Nonlinear Analysis: Real World Applications, 12, 1-13.
http://dx.doi.org/10.1016/j.nonrwa.2009.12.009

[19]   Wang, S.W. and Tan, W.C. (2008) Stability Analysis of Double-Diffusive Convection of Maxwell Fluid in a Porous Medium Heated from Below. Physics Letters A, 372, 3046-3050.
http://dx.doi.org/10.1016/j.physleta.2008.01.024

[20]   Tan, W.C. and Xu, M.Y. (2004) Unsteady Flows of a Generalized Second Grade Fluid with the Fractional Derivative Model between Two Parallel Plates. Acta Mechanica Sinica, 20, 471-476.

[21]   Zhang, Z.Y., Fu, C.J., Tan, W.C. and Wang, C.Y. (2007) On Set of Oscillatory Convection in a Porous Cylinder Saturated with a Viscoelastic Fluid. Physics of Fluids, 19, 98-104.

[22]   Rashidi, M.M., Chamkha, A.J. and Keimanesh, M. (2011) Application of Multi-Step Differential Transform Method on Flow of a Second Grade Fluid over a Stretching or Shrinking Sheet. American Journal of Computational Mathematics, 6, 119-128. http://dx.doi.org/10.4236/ajcm.2011.12012

[23]   Ali, N., Hayat, T. and Asghar, S. (2009) Peristaltic Flow of Maxwell Fluid in a Channel with Compliant Walls. Chaos, Solitons & Fractals, 39, 407-416. http://dx.doi.org/10.1016/j.chaos.2007.04.010

[24]   Attia, H.A. and Seddeek, M.A. (2007) On the Effectiveness of Uniform Suction or Injection on Two Dimensional Stagnation-Point Flow towards a Stretching Surface with Heat Generation. Chemical Engineering Communications, 194, 553-564. http://dx.doi.org/10.1080/00986440600992537

[25]   Hussain, M., Hayat, T., Asghar, S. and Fetecau, C. (2010) Oscillatory Flows of Second Grade Fluid in a Porous Space. Nonlinear Analysis: Real World Applications, 11, 2403-2414.
http://dx.doi.org/10.1016/j.nonrwa.2009.07.016

[26]   Casson, N. (1959) In Reheology of Dipersed System. Peragamon Press, Oxford.

[27]   Nakamura, M. and Sawada, T. (1988) Numerical Study on the Flow of a Non-Newtonian Fluid through an Axisymmetric Stenosis. Journal of Biomechanical Engineering, 110, 137-143.
http://dx.doi.org/10.1115/1.3108418

[28]   Samir Kumar, N. (2013) Analytical Solution of MHD Stagnation-Point Flow and Heat Transfer of Casson Fluid over a Stretching Sheet with Partial Slip. ISRN Thermodynamics, 2013, Article ID: 108264.

[29]   Keller, H.B. (1970) A New Difference Method for Parabolic Problems. In: Bramble, J., Ed., Numerical Methods for Partial Differential Equations, Academic Press, New York, 327-350.

[30]   Prasd, V.R., Vasu, B. and Beg, O.A. (2011) Thermo-Diffusion and Diffusion-Thermo Effects on Boundary Layer Flows. LAP Lambert Academic Publishing GmbH & Co. KG, Saarbrücken.

[31]   Rao, A.S., Prasad, V.R., Reddy, N.B. and Bég, O.A. (2013) Heat Transfer in a Casson Rheological Fluid from a Semi-infinite Vertical Plate with Partial Slip. Heat Transfer-Asian Research, 44, 272-291.
http://dx.doi.org/10.1002/htj.21115

[32]   Bég, O.A., Prasad, V.R., Vasu, B., Reddy, N.B., Li, Q. and Bhargava, R. (2011) Free Convection Heat and Mass Transfer from an Isothermal Sphere to a Micropolar Regime with Soret/Dufour Effects. International Journal of Heat and Mass Transfer, 54, 9-18.
http://dx.doi.org/10.1016/j.ijheatmasstransfer.2010.10.005

[33]   Prasad, V.R., Rao, A.S., Reddy, N.B., Vasu, B. and Beg, O.A. (2013) Modelling Laminar Transport Phenomena in a Casson Rheological Fluid from a Horizontal Circular Cylinder with Partial Slip. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 227, 309-326. http://dx.doi.org/10.1177/0954408912466350

[34]   Cebeci, T. and Bradshaw, P. (1984) Physical and Computational Aspects of Convective Heat Transfer. Springer, New York. http://dx.doi.org/10.1007/978-3-662-02411-9

[35]   Merkin, J.H. (1977) Free Convection Boundary Layers on Cylinders of Elliptic Cross Section. Journal of Heat Transfer, 99, 453-457. http://dx.doi.org/10.1115/1.3450717

[36]   Prasad, V.R., Vasu, B., Prashad, D.R. and Bég, O.A. (2012) Thermal Radiation Effects on Magneto-Hydrodynamic Heat and Mass Transfer from a Horizontal Cylinder in a Variable Porosity Regime. Journal of Porous Media, 15, 261- 281. http://dx.doi.org/10.1615/JPorMedia.v15.i3.50

[37]   B′eg, O.A. and Makinde, O.D. (2011) Viscoelastic Flow and Species Transfer in a Darcian High-Permeability Channel. Journal of Petroleum Science and Engineering, 76, 93-99.
http://dx.doi.org/10.1016/j.petrol.2011.01.008

[38]   Kairi, R.R. and Murthy, P.V.S.N. (2012) Effect of Melting on Mixed Convection Heat and Mass Transfer in a Non-Newtonian Fluid Saturated Non-Darcy Porous Medium. Journal of Heat Transfer, 134, Article ID: 042601.

 
 
Top