JPEE  Vol.3 No.6 , June 2015
Power Quality Study of an Isolated Northwest Grid of Saudi Arabia with PV and Storage
Abstract: One main concern of power quality is harmonics because the distorted waveforms of current and voltage have a huge effect on electrical equipment. Due to the continuous increase of grid connected photovoltaic (PV) and nonlinear loads, as a result of the fast development and growth of power electronics application, power quality becomes more important since it introduces harmonics to the power system. This paper presents a power quality study to the isolated northwest grid of Saudi Arabia in presence of PV system and battery storage. Moreover, the study includes nonlinear loads for more analysis regarding harmonics penetration and the design procedure for passive filters to eliminate the harmonics.
Cite this paper: Albalawi, H. and Makram, E. (2015) Power Quality Study of an Isolated Northwest Grid of Saudi Arabia with PV and Storage. Journal of Power and Energy Engineering, 3, 54-64. doi: 10.4236/jpee.2015.36006.

[1]   Rao, R.N. (2013) Harmonic Analysis of Small Scale Industrial Loads and Harmonic Mitigation Techniques in Industrial Distribution System. International Journal of Engineering Research and Applications, 3, 1511-1540.

[2]   Fauri, M. (1997) Harmonic Modeling of Non-Linear Load by means of Crossed Frequency Admittance Matrix. IEEE Transactions on Power Systems, 12, 1632-1638.

[3]   Yazdani, A. and Dash, P.P. (2009) A Control Methodology and Characterization of Dynamics for Photovoltaic (PV) System Interfered with a Distribution Network. IEEE Transactions on Power Delivery, 24, 1538-1551.

[4]   Mahmood, F., Yanfretti, L. and Hooshyar, H. (2014) Modeling of a Detailed Photovoltaic Generation System for EMT-Type Simulation. IEEE International Energy Conference, Cavtat, 13-16 May 2014, 916-921.

[5]   Jiang, S. (2012) Battery Component in PSCAD/EMTDC. Manitoba HVDC Research Centre, Winnipeg.

[6]   Tremblay, O., Dessaint, L.A. and Dekkiche, A.I. (2007) A Generic Battery Model for the Dynamic Simulation of Hybrid Electric Vehicles. IEEE Vehicle Power and Propulsion Conference, Arlington, 9-12 September 2007, 284-289.

[7]   Clarke, A., Bihani, H., Makram, E. and Corzine, K. (2013) Fault Analysis on an Unbalanced Distribution System in the Presence of Plug-In Hybrid Electric Vehicles. Clemson Power System Conference, March 2013.

[8]   Balaraju, U.P., Kethineni, B., Shewale, R. and Grourishetti, S. (2012) Harmonic Effects and Its Mitigation Techniques for a Nonlinear Load. International Journal of Advanced Technology & Engineering Research, 2, 122-127.

[9]   Badrzadeh, B., Smith, K. and Wilson, R.C. (2011) Designing Passive Harmonic Filters for an Aluminum Smelting Plant. IEEE Transactions on Industry Application, 47, 973-983.

[10]   Wakileh, G.J. (2001) Power System Harmonics: Fundamental, Analysis and Filter Design. Springer, New York.

[11]   Gonen, T. (2008) Electrical Power Distributed System Engineering. 2nd Edition, CRC Press, New York.

[12]   Sankaran, C. (2008) Power Quality. CRC Press, New York.

[13]   McGranaghan, M. (1988) Overview of the Guide for Applying Harmonic Limits on Power Systems—IEEE P519A. 8th International Conference on Harmonics and Quality of Power Proceeding, Athens, 14-18 October 1998, 462-469.