MSA  Vol.6 No.6 , June 2015
Determination of Some Physical and Mechanical Properties of the Wood-Based Panels Modified by Acrylic Textile Fiber
ABSTRACT
In this research, a series of wood-based panels were produced by using wood chips [beech (Fagus Sylvatica L.) and Scotch pine (Pinus sylvestris L.)] as wastes of wood-working workshops and acrylic fibers as wastes of textiles factory. Four kinds of different panels (Eltapan I, II, III and IV) were obtained by mixing these components in different composition (0%, 25% and 50%). Some physical and mechanical properties of the samples taken from these panels were determined in accordance with ASTM D1037-12 and ASTM-C 1113. The values were compared to properties of industrially produced chipboard. As a result, the textile fibers used as additive material reduced density, thermal conductivity and bending resistance of wood panel and increased dimensional stability of wood panel.

Cite this paper
Altunok, M. , Kureli, I. and Pulat, M. (2015) Determination of Some Physical and Mechanical Properties of the Wood-Based Panels Modified by Acrylic Textile Fiber. Materials Sciences and Applications, 6, 519-526. doi: 10.4236/msa.2015.66055.
References
[1]   10th Annual Forestry, Wildlife and Natural Resources Research Review “Critical Natural Resource Issues Affecting Minnesota Forests”, Natural Resources Research Institute, Cloquet Forestry Center January 16, 2013.

[2]   Stueben, K. (1970) Part I, High Polymers Series Vol. XXIV. In: Leonard, E.C., Ed., Vinyl and Diene Monomers, Wiley-Interscience, New York, Chapt. 1, 181.

[3]   Palit, S.R., Guha, T., Das, R. and Konar, R.S. (1965) Vol. 2. In: Bikales, N.M., Ed., Encyclopedia of Polymer Science and Technology, John Wiley & Sons, Inc., New York, 229.

[4]   Capone, G.J. and Masson, J.C. (2004) Encyclopedia of Polymer Science and Technology, Acrylic Fibers. John Wiley & Sons, Inc., Vol. 9, 1-39.
http://dx.doi.org/10.1002/0471440264

[5]   Knudsen, J.P. (1963) The Influence of Coagulation Variables on the Structure and Physical Properties of an Acrylic Fiber. Textile Research Journal, 33, 13-20.

[6]   Karakisla, M. and Sacak, M. (1998) Grafting of Ethyl Acrylate onto Monofilament Polyester Fibers Using Benzoyl Peroxide. Journal of Applied Polymer Science, 70, 1701-1705.
http://dx.doi.org/10.1002/(SICI)1097-4628(19981128)70:9<1701::AID-APP7>3.0.CO;2-K

[7]   Sacak, M. and Celik, M. (1996) Hydrogen Peroxide Initiated Grafting of Acrylamide onto Poly(ethylene terephthalate) Fibers in Benzyl Alcohol. Journal of Applied Polymer Science, 59, 1191-1194.

[8]   Ongun, N., Karakisla, M., Aksu, L. and Sacak, M. (2004) Graft Polymerization of Methacrylamide onto Poly(ethylene terephthalate) Fibers with Benzoyl Peroxide as Initiator and their Characterization. Macromolecular Chemistry and Physics, 205, 1995-2001.
http://dx.doi.org/10.1002/macp.200400178

[9]   Velosa, J., Fanguerio, R., Martins, N., Fernandes, M. and Soutinho, F. (2013) Waste Fiber Reinforced Composite Materials: Production and Mechanical Properties. Materials and Science Forum, 730-732, 665-670.
http://dx.doi.org/10.4028/www.scientific.net/MSF.730-732.665

[10]   Berkel, A. (1970) Wood Material Technology. Istanbul University, Forest Faculty, 319.

[11]   Güler, C. and Subasi, S. (2011) Carbon and Glass Fiber Reinforced Laminated Scots Pine (Pinus sylvestris L.), I. Ulusal Akdeniz Orman ve Cevre Sempozyumu, 26-28 Ekim.

[12]   ASTM C1113/C1113M-09 (2013) Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique).

[13]   Fiorelli, J. and Dias, A. (2006) Fiberglass-Reinforced Glulam Beams: Mechanical Properties and Theoretical Model. Materials Research, 9, 263-269.
http://dx.doi.org/10.1590/S1516-14392006000300004

[14]   Acik, C. and Tutus, A. (2012) Effects of Various Synthetic Surface Coatings on Thermal Conductivity of Fiberboard. Ormancilik Dergisi, 8, 1-8.

[15]   Kadolph, S.J., Langford, A.L., et al. (1998) Textiles. 8th Edition, Prentice-Hall, Inc. imon & Schuster/A Viacom Company, New Jersey, 118, 121.

[16]   Synthetic Fiber/Physical and Chemical Properties of Acrylic.
http://textilefashionstudy.com/synthetic-fiber-physical-and-chemical-properties-of-acrylic

[17]   ASTM-D 143–83 (1983) Standard Methods of Testing Small Clear Specimens of Timber.

[18]   ASTM D1037-12 (2012) Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials.

 
 
Top