MSA  Vol.6 No.6 , June 2015
Energy Absorption of Pultruded Hybrid GlassGraphite Epoxy Composites under High Strain-Rate SHPB Compression Loading
ABSTRACT
In this study, the dynamic response and energy absorption characteristics of different combinations of fiber-reinforced pultruded hybrid composites made of unidirectional glass and graphite fiber/epoxy, have been investigated. High strain-rate compression experiments were conducted on cylindrical specimens at an average strain rate of 700 /s using a modified Split Hopkinson Pressure Bar (SHPB). Failure was monitored with a high-speed video camera, and effects of hybridization on the dynamic behavior of pultruded composites were evaluated. It was found that for a given fiber volume fraction, placing glass fibers in the inner core results in a higher ultimate compressive strength, specific energy absorption, and in general a better dynamic performance with lower density.

Cite this paper
Daryadel, S. , Ray, C. , Pandya, T. and Mantena, P. (2015) Energy Absorption of Pultruded Hybrid GlassGraphite Epoxy Composites under High Strain-Rate SHPB Compression Loading. Materials Sciences and Applications, 6, 511-518. doi: 10.4236/msa.2015.66054.
References
[1]   Gibson, R.F. (2007) Principles of Composite Material Mechanics. 2nd Edition, CRC Press, Boca Raton.

[2]   Kumar, S.S. and Mantena, P.R. (1996) Dynamic and Static Torsional Characterization of Pultruded HybridCylindrical Composite Rods. Journal of Composite Materials, 30, 918-932.
http://dx.doi.org/10.1177/002199839603000804

[3]   Vaughan, J.G., Roux, J.A., and Mantena, P.R. (1992) Characterization of Mechanical and Thermal Properties of Advanced Composite Pultrusions. Proceedings of the 1992 NSF Design and Manufacturing Systems Conference, Atlanta, 8-10 January 1992, 1141-1145.

[4]   Mantena, P.R., Vaughan, J.G., Donti, R.P. and Kowsika, M.V. (1992) Influence of Process Variables on the Dynamic Characteristics of Pultruded Graphite-Epoxy Composites. Vibro-Acoustic Characterization of Materials and Structures, ASME, 14, 147-154.

[5]   Mantena, P.R., Vangipuram, R. and Vaughan, J.G. (1994) Dynamic Flexural Properties of Pultruded Glass/Graphite Hybrid Composites. 39th International SAMPE Symposium, Anaheim, 11-14 April 1994, 174-182.

[6]   Nori, C.V., Mantena, P.R. and McCarty, T.A. (1996) Experimental and Finite Element Analysis of Pultruded Glass- Graphite/Epoxy Hybrids in Axial and Flexural Modes of Vibration. Journal of Composite Materials, 30, 1996-2018.
http://dx.doi.org/10.1177/002199839603001803

[7]   Ranganathan, S. and Mantena, P.R. (2003) Axial Loading and Buckling Response Characteristics of Pultruded Hybrid Glass-Graphite/Epoxy Composite Beams. Journal of Reinforced Plastics and Composites, 22, 7671-7679.
http://dx.doi.org/10.1177/073168403024566

[8]   Kowsika, M.V. and Mantena, P.R. (1999) Static and Low-Velocity Impact Response Characteristics of Pultruded Hybrid Glass-Graphite/Epoxy Composite Beams. Journal of Thermoplastic Composite Materials, 12, 121-132.
http://dx.doi.org/10.1177/089270579901200203

[9]   Kowsika, M.V., Mantena, P.R. and Balasubramaniam. (2002) Energy Absorption and Dissipation Characteristics of Pultruded Glass-Graphite/Epoxy Hybrid Composite Beams. Journal of Thermoplastic Composite Materials, 15, 227- 252.
http://dx.doi.org/10.1177/0892705702015003453

[10]   Vinson, J.R. and Woldesenbet, E. (2002) Fiber Orientation Effects on High Strain Rate Properties of Graphite/Epoxy Composite. Journal of Composite Materials, 35, 509-521.
http://dx.doi.org/10.1177/002199801772662136

[11]   Woldesenbet, E. and Vinson, J.R. (1999) Specimen Geometry Effects on High-Strain-Rate Testing of Graphite/Epoxy Composites. AIAA Journal, 37, 1102-1106.
http://dx.doi.org/10.2514/2.820

[12]   Harding, J. (1993) Effect of Strain Rate and Specimen Geometry on the Compressive Strength of Woven Glass- Reinforced Epoxy Laminates. Composites, 24, 323-332.
http://dx.doi.org/10.1016/0010-4361(93)90042-7

[13]   Asprone, D., Cadoni, E., Prota, A. and Manfredi, G. (2009) Strain-Rate Sensitivity of a Pultruded E-Glass/Polyester Composite. Journal of Composites for Construction, 13, 558-564.
http://dx.doi.org/10.1061/(ASCE)CC.1943-5614.0000036

[14]   Hosur, M.V., Alexander, J., Vaidya, U.K. and Jeelani, S. (2001) High Strain Rate Compression Response of Carbon/ Epoxy Laminate Composites. Composite Structures, 52, 405-417.
http://dx.doi.org/10.1016/S0263-8223(01)00031-9

[15]   Hsiao, H. M., and Daniel, I. M. (1998) Strain Rate Behavior of Composite Materials. Composites Part B: Engineering, 29, 521-533.
http://dx.doi.org/10.1016/S1359-8368(98)00008-0

[16]   Hsiao, H.M., Daniel, I.M. and Cordes, R.D. (1998) Dynamic Compressive Behaviour of Thick Composite Materials. Experimental Mechanics, 38, 172-180.
http://dx.doi.org/10.1007/BF02325740

[17]   Huang, Z., Nie, X. and Xia, Y. (2004) Effect of Strain Rate and Temperature on the Dynamic Tensile Properties of GFRP. Journal of Materials Science, 39, 3479-3482.
http://dx.doi.org/10.1023/B:JMSC.0000026956.45427.68

[18]   Sierakowski, R.L. (1997) Strain Rate Effects in Composites. Applied Mechanics Review, 50, 741-761.
http://dx.doi.org/10.1115/1.3101860

[19]   El-Habak, A.M.A. (1993) Compressive Resistance of Unidirectional GFRP under High Rate of Loading. Journal of Composites, Technology and Research, 15, 311-317.
http://dx.doi.org/10.1520/CTR10384J

[20]   Okoli, I. (2001) The Effect of Strain Rate and Failure Modes on the Failure Energy of Fiber Reinforced Composites. Composite Structures, 54, 299-303.
http://dx.doi.org/10.1016/S0263-8223(01)00101-5

[21]   Tay, T.E., Ang, H.G. and Shim, V.P.W. (1995) An Empirical Strain Rate-Dependent Constitutive Relationship for Glass- Fibre Reinforced Epoxy and Pure Epoxy. Composite Structures, 33, 201-210.
http://dx.doi.org/10.1016/0263-8223(95)00116-6

[22]   Yokoyama, T., Nakai, K. and Odamura, T. (2007) High Strain-Rate Compressive Characteristics of a Unidirectional Carbon/Epoxy Composite: Effect of Loading Directions. In: Gdoutos, E.E., Ed., Experimental Analysis of Nano and Engineering Materials and Structures, Springer Netherlands, 681-682.

[23]   H. Koerber, Camanho, P.P. (2011) High Strain Rate Characterization of Unidirectional Carbon-Epoxy IM7-8552 in Longitudinal Compression. Composites Part A: Applied Science and Manufacturing, 42, 462-470.
http://dx.doi.org/10.1016/j.compositesa.2011.01.002

[24]   Alghamdi, A.A.A. (2001) Collapsible Impact Energy Absorbers: An Overview. Thin-Walled Structures, 39, 189-213.
http://dx.doi.org/10.1016/S0263-8231(00)00048-3

[25]   Lu, G. and Yu, T. (2003) Energy Absorption of Structures and Materials. Woodhead Publishing Limited, Sawston, 144-173.

[26]   Kolsky, H. (1949) An Investigation of the Mechanical Properties of Materials at Very High Rates of Loading. Proceedings of the Physical Society. Section B, 62, 676-700.
http://dx.doi.org/10.1088/0370-1301/62/11/302

 
 
Top