Theoretical Modeling for Predicting the Optimum Twist Angle of Cotton Fiber Movement on OE Yarn Made by Rotor Spinning Machine
Abstract: This paper presents theoretical modeling for predicting the optimum twist angle on yarn made by open end rotor spinning machine in textile industry. Fiber movement on yarn can be used for predicting the optimum twist angle which can be used to reduce yarn breaking in spinning process. In this research the twist angle has been found and the result of this research shows the twist angle around 45°; and the theoretical result of the ratio of rotor diameter to fiber length is .
Cite this paper: Putra, V. and Rosyid, M. (2015) Theoretical Modeling for Predicting the Optimum Twist Angle of Cotton Fiber Movement on OE Yarn Made by Rotor Spinning Machine. Journal of Applied Mathematics and Physics, 3, 623-630. doi: 10.4236/jamp.2015.35074.
References

[1]   Rohlena, V., et al. (1975) Open-End Spinning. Elseiver Scientific Publishing Company, New York.

[2]   Lawrence, C.A. (2003) Fundamentals of Spun Yarn Technology. CRC Press, New York.

[3]   Hearle, J.W.S. and Grosberg, P. (1969) Structural Mechanics of Fibres, Yarns and Fabrics. Wiley-Interscience, USA.

[4]   Furter, R. (2009) Measurement and Significance of Yarn Twist. Uster Technology AG, Switzerland.

[5]   Musa, K. and Ayse, O. (2006) Relationships between Yarn Diameter/Diameter Variation and Strength. Fibres and Textiles in Eastern Europe, 14, 84-87.

[6]   Penava, Z. and Oreskovic, V. (1997) Analysis of the Coincidence between Thin Places and Breaking Points in a Yarn. Journal of the Textile Institute, 88, 21-32.

[7]   Prendzova (2000) International Journal of Polymeric Materials, 47, 701-707.

[8]   Trommer, G. (1995) Rotor Spinning. Deutscher Fachverlag, Frankfurt.

Top