IJCCE  Vol.4 No.2 , May 2015
Simulation of Ash Deposition Behavior in an Entrained Flow Coal Gasifier
Author(s) Xijia Lu*, Ting Wang
ABSTRACT
Fly ash deposition is an important phenomenon associated with ash/slag handling and discharge in the entrained-flow coal gasification process. Fouling and slagging inside the gasifier may cause reliability and safety problems because they can impose strong negative effects on the gasifier wall in the way of heat transfer and chemical corrosion. For these reasons, this study focuses on investigating the ash deposition distribution inside of a two-stage entrained-flow gasifier. The computational model is developed in order to simulate the gasification process with a focus on modeling ash formation, fly ash, and ash deposition. The Eulerian-Lagrangian approach is applied to solve the reactive thermal-flow field and particle trajectories with heterogeneous reactions. The governing equations include the Navier-Stokes equations, twelve species transport equations, and ten global chemical reactions consisting of three heterogeneous reactions and seven homogeneous reactions. The coal/ash particles are tracked with the Lagrangian method. The effects of different coal/ash injection schemes and different coal types on ash deposition have been investigated. The results show that the two-stage fuel feeding scheme could distribute the ash throughout a larger gasifier’s volume and, hence, could reduce the peak ash deposition rate and make the ash distribution more uniform inside the gasifier. Gasification of a high-ash coal results in a high ash deposition rate, low syngas higher heating value (HHV), and low carbon conversion rate. The result of ash deposition rate in this study can be used as a boundary condition to provide ash particle influx distribution for use in slagging models.

Cite this paper
Lu, X. and Wang, T. (2015) Simulation of Ash Deposition Behavior in an Entrained Flow Coal Gasifier. International Journal of Clean Coal and Energy, 4, 43-59. doi: 10.4236/ijcce.2015.42005.
References
[1]   Sahu, P. (2010) Characterization of Coal Combustion By-products (CCBs) for Their Effective Management and Utilization. Thesis, Department of Mining Engineering, National Institute of Technology, Rourkela, Orissa.

[2]   Chen, L., Yong, S. and Ghoniem, A. (2012) Modeling the Slag Behavior in Three Dimensional CFD Simulation of a Vertically-Oriented Oxy-Coal Combustor. The 37th International Technical Conference on Clean Coal & Fuel Systems, Clearwater, 3-7 June 2012.

[3]   Beér, J. (2000) Combustion Technology Developments in Power Generation in Response to Environmental Challenges. Progress in Energy and Combustion Science, 26, 301-27. http://dx.doi.org/10.1016/S0360-1285(00)00007-1

[4]   Feng, J., Shen, Y. and Yang, R. (2003) Principles and Calculations of Boilers. 3rd Edition, Science Press, Beijing.

[5]   Shao, Y. (2011) Investigation of Ash Deposition during Co-Firing Biomass/Peat with Coal in a Pilot-scale Fluidized-Bed Reactor. Ph.D. Thesis, University of Western Ontario London, Ontario.

[6]   Couch, G. (1994) Understanding Slagging and Fouling in pf Combustion. IEA Coal Research, London.

[7]   Xu, L., Lee, J. and Kim, H. (2007) Comparison of Low Temperature Ash Deposition Determined by Theoretical and Experimental Method in Coal Gasifier Condition. World of Coal Ash (WOCA), 7-10 May 2007, Northern Kentucky.

[8]   Barroso, J., Ballester, J., Ferrer, L. and Jiménez, S. (2006) Study of Coal Ash Deposition in an Entrained Flow Reactor: Influence of Coal Type, Blend Composition and Operating Conditions. Fuel Processing Technology, 87, 737-752. http://dx.doi.org/10.1016/j.fuproc.2006.02.004

[9]   Fernandez-Turiel, J., Georgakopoulos, A., Gimeno, D., Papastergios, G. and Kolovos, N. (2004) Ash Deposition in a Pulverized Coal-Fired Power Plant after High-Calcium Lignite Combustion. Energy & Fuels, 18, 1512-1518. http://dx.doi.org/10.1021/ef0400161

[10]   Cao, Z., Sun, L., Cao, X. and He, Y. (2011) Study on Fly Ash Adhesion Characteristics and Deposition Mechanism in Shell Coal Gasification Process. Advanced Materials Research, 233-235, 789-793.

[11]   Ahmadi, G., Mazaheri, A., Liu, C. and Gamwo, I. (2002) Computer Modeling of Flow, Thermal Condition and Ash Deposition in a Hot-Gas Filtration Device. Proceedings of the 5th International Symposium on Gas Cleaning at High Temperatures, Morgantown, 17-20 September 2002.

[12]   Schulze, K., Scharler, R. and Obernberger, I. (2011) Development of an Advanced CFD Model for Ash Deposit and Aerosol Formation in Biomass Fired Boilers. Proceedings of the 9th European Conference on Industrial Furnaces and Boilers, Estoril, 26-29 April 2011.

[13]   Yong, S., Gazzino, M. and Ghoniem, A. (2012) Modeling the Slag Layer in Solid Fuel Gasification and Combustion— Formulation and Sensitivity Analysis. Fuel, 92, 162-170. http://dx.doi.org/10.1016/j.fuel.2011.06.062

[14]   Yong, S. and Ghoniem, A. (2012) Modeling the Slag Layer in Solid Fuel Gasification and Combustion—Two-Way Coupling with CFD. Fuel, 97, 457-466. http://dx.doi.org/10.1016/j.fuel.2012.02.063

[15]   Lu, X. and Wang, T. (2013) Water-Gas Shift Modeling in Coal Gasification in an Entrained-Flow Gasifier, Part 1: Development of Methodology and Model Calibration. Fuel, 108, 629-638.

[16]   Lu, X. and Wang, T. (2013) Water-Gas Shift Modeling in Coal Gasification in an Entrained-Flow Gasifier, Part 2: Gasification Application. Fuel, 108, 620-628.

[17]   DOE/NETL Report (2011) Cost and Performance Baseline for Fossil Energy Plants Volume 3a: Low Rank Coal to Electricity: IGCC Cases. National Energy Technology Laboratory.

[18]   Chen, C., Horio, M. and Kojima, T. (2000) Numerical Simulation of Entrained Flow Coal Gasifiers. Chemical Engineering Science, 55, 3861-3833. http://dx.doi.org/10.1016/S0009-2509(00)00030-0

[19]   Westbrook, C.K. and Dryer, F.L. (1981) Simplified Reaction Mechanisms for the Oxidation of Hydrocarbon Fuels in Flames. Combustion Science and Technology, 27, 31-43. http://dx.doi.org/10.1080/00102208108946970

[20]   Jones, W.P. and Lindstedt, R.P. (1988) Global Reaction Schemes for Hydrocarbon Combustion. Combustion and Flame, 73, 233-249. http://dx.doi.org/10.1016/0010-2180(88)90021-1

[21]   Benyon, P. (2002) Computational Modelling of Entrained Flow Slagging Gasifiers. Ph.D. Thesis, School of Aerospace, Mechanical & Mechatronic Engineering, University of Sydney, Sydney.

[22]   Silaen, A. and Wang, T. (2010) Effect of Turbulence and Devolatilization Models on Gasification Simulation. International Journal of Heat and Mass Transfer, 53, 2074-2091. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2009.12.047

[23]   Lu, X. and Wang, T. (2014) Investigation of Low Rank Coal Gasification in a Two-Stage Downdraft Entrained-Flow Gasifier. International Journal of Clean Coal and Energy, 3, 1-12. http://dx.doi.org/10.4236/ijcce.2014.31001

[24]   Lu, X. and Wang, T. (2013) Investigation of Radiation Models in Entrained-flow Coal Gasification Simulation. International Journal of Heat and Mass Transfer, 67, 377-392.

[25]   Li, A., and Ahmadi, G. (1992) Dispersion and Deposition of Spherical Particles from Point Sources in a Turbulent Channel Flow. Aerosol Science and Technology, 16, 209-226. http://dx.doi.org/10.1080/02786829208959550

[26]   Saffman, P. (1965) The Lift on a Small Sphere in a Slow Shear Flow. Journal of Fluid Mechanics, 22, 385-400. http://dx.doi.org/10.1017/S0022112065000824

[27]   Kallio, G. and Reeks, M. (1989) A Numerical Simulation of Particle Deposition in Turbulent Boundary Layers. International Journal of Multiphase Flow, 15, 433-446.

[28]   Talbot, L., Cheng, R., Schefer, R. and Willis, D. (1980) Thermophoresis of Particles in a Heated Boundary Layer. Journal of Fluid Mechanics, 101, 737-758. http://dx.doi.org/10.1017/S0022112080001905

[29]   Energy Laboratory at Brigham Young University (2014) Ash Fusion Temperature. http://www.et.byu.edu/~larryb/Ash%20Fusion%20Temperatures_1.html

 
 
Top