MSA  Vol.6 No.5 , May 2015
Optical Properties of Tetrahedral Amorphous Carbon Films and Their Potential for Lab-on-a-Chip
ABSTRACT
In this study, tetrahedral amorphous carbon (ta-C) films with thicknesses between several 100 nm and several micrometers have been deposited onto polished tungsten carbide and steel substrates by pulsed laser deposition (PLD) using an excimer laser (248 nm wavelength). We investigate the optical properties (e.g. the refractive index (n) and extinction coefficient (k) in the visible and near-infrared wavelength range) of these layers in dependence of the used laser ablation fluence on the target. It is shown that n of ~2000 nm thick ta-C films can be tuned, depending on the sp3-content, between n = 2.5 and 2.8 at a wavelength of 632 nm. Besides of this k reduces with the sp3-content and is as low as 0.03 at sp3-contents of more than 75%. We proof that this gives the opportunity to prepare coating with tailored optical properties. Furthermore, it is shown that the ta-C films have low background fluorescence in the wavelengths range of 380 - 750 nm, which make this thin films attractive for certain optical, medical and biotechnological applications. We present for the first time that one possible application is the use in Lab-on-a-Chip-systems (LOC). Within these systems, the ultrasensitive detection of fluorescence markers and dyes is a challenge. In order to increase the signal-to-noise-ratio, a setup was developed, that used the specific optical properties of ta-C films produced by PLD. We used the ta-C film as an integrated reflector that combined low background fluorescence, a low reflectivity at the excitation wavelength and the high reflectivity at the emission wavelength. We prove that this setup improves the detection of fluorescence photons.

Cite this paper
Guenther, K. , Sonntag, F. , Roch, T. and Lasagni, A. (2015) Optical Properties of Tetrahedral Amorphous Carbon Films and Their Potential for Lab-on-a-Chip. Materials Sciences and Applications, 6, 445-455. doi: 10.4236/msa.2015.65048.
References
[1]   (2012) Kohlenstoffschichten-Grundlagen, Schichttypen und Eigenschaften: VDI2840-2012-06, in VDI-Handbuch Pro- duktionstechnik und Fertigungsverfahren, Band 3, Betriebsmittel VDI-Handbuch Werkstofftechnik Verein Deutscher Ingenieure Beuth, Verlag GmbH, Berlin.

[2]   Charitidis, C.A. (2010) Nanomechanical and Nanotribological Properties of Carbon-Based Thin Films: A Review. International Journal of Refractory Metals and Hard Materials, 28, 51-70.
http://dx.doi.org/10.1016/j.ijrmhm.2009.08.003

[3]   Kang, M.C., Tak, H.S., Jeong, Y.K., Lee, H.W. and Kim, J.S. (2010) Properties and Tool Performance of ta-C Films Deposited by Double-Bend Filtered Cathodic Vacuum Arc for Micro Drilling Applications. Diamond and Related Materials, 19, 866-869.
http://dx.doi.org/10.1016/j.diamond.2010.02.002

[4]   Schulz, H., Scheibe, H.-J., Siemroth, P. and Schultrich, B. (2004) Pulsed Arc Deposition of Super-Hard Amorphous Carbon Films. Applied Physics, A78, 675-679.
http://dx.doi.org/10.1007/s00339-003-2280-8

[5]   Neuville, S. and Matthews, A. (2007) A Perspective on the Optimization of Hard Carbon and Related Coatings for Engineering Applications. Thin Solid Films, 515, 6619-6653.
http://dx.doi.org/10.1016/j.tsf.2007.02.011

[6]   Yu, H., Li, P. and Robertson, J. (2011) Fabrication and Bio-Functionalization of Tetrahedral Amorphous Carbon Thin Films for Bio Sensor Applications. Diamond and Related Materials, 20, 1020-1025.
http://dx.doi.org/10.1016/j.diamond.2011.06.005

[7]   Patsalas, P. (2011) Optical Properties of Amorphous Carbons and Their Applications and Perspectives in Photonics. Thin Solid Films, 519, 3990-3996.
http://dx.doi.org/10.1016/j.tsf.2011.01.202

[8]   Mathioudakis, C., Kopidakis, G., Patsalas, P. and Kelires, P.C. (2007) Disorder and Optical Properties of Amorphous Carbon. Diamond and Related Materials, 16, 1788-1792.
http://dx.doi.org/10.1016/j.diamond.2007.08.009

[9]   Schultrich, B. (2011) Modeling of ta-C Growth: Influence of the Technological Parameters. Diamond and Related Materials, 20, 785-792.
http://dx.doi.org/10.1016/j.diamond.2011.03.035

[10]   Tay, B.K., Shi, X., Cheah, L.K. and Flynn, D.I. (1997) Optical Properties of Tetrahedral Amorphous Carbon Films Determined by Spectroscopic Ellipsometry. Thin Solid Films, 308-309, 268-272.
http://dx.doi.org/10.1016/S0040-6090(97)00425-2

[11]   Panwar, O.S., Khan, M.A., Bhattacharjee, B., Pal, A.K., Satyanarayana, B.S., Dixit, P.N., Bhattacharyya, R. and Khan, M.Y. (2006) Reflectance and Photoluminescence Spectra of as Grown and Hydrogen and Nitrogen Incorporated Tetrahedral Amorphous Carbon Films Deposited Using an S Bend Filtered Cathodic Vacuum Arc Process. Thin Solid Films, 515, 1597-1606.
http://dx.doi.org/10.1016/j.tsf.2006.05.024

[12]   Panwar, O.S., Khan, M.A., Kumar, M., Shivaprasad, S.M., Satyanarayana, B.S., Dixit, P.N., Bhattacharyya, R. and Khan, M.Y. (2008) Effect of High Substrate Bias and Hydrogen and Nitrogen Incorporation on Filtered Cathodic Vacuum Arc Deposited Tetrahedral Amorphous Carbon Films. Thin Solid Films, 516, 2331-2340.
http://dx.doi.org/10.1016/j.tsf.2007.09.024

[13]   Panwar, O.S., Khan, M.A., Kumar, S., Basu, A., Mehta, B.R. and Kumar, S. (2010) Effect of High Substrate Bias and Hydrogen and Nitrogen Incorporation of Spectroscopic Ellipsometric and Atomic Force Microscopic Studies of Tetrahedral Amorphous Carbon Films. Surface and Coatings Technology, 205, 2126-2133.
http://dx.doi.org/10.1016/j.surfcoat.2010.08.119

[14]   WeiBmantel, S., ReiBe, G. and Rost, D. (2004) Preparation of Super-Hard Amorphous Carbon Films with Low Internal Stress. Surface and Coatings Technology, 188-189, 268-273.
http://dx.doi.org/10.1016/j.surfcoat.2004.08.070

[15]   Materne, E.-M., Maschmeyer, I.J., Lorenz, A.K., Horland, R., Schimek, K.M.S., Busek, M., Sonntag, F., Lauster, R. and Marx, U. (2015) The Multi-Organ Chip—A Microfluidic Platform for Long-Term Multi-Tissue Coculture. Journal of Visualized Experiments, 98, e52526.
http://dx.doi.org/10.3791/52526

[16]   Maschmeyer, I., Lorenz, A.K., Schimek, K., Hasenberg, T., Ramme, A.P., Hübner, J., Lindner, M., Drewell, C., Bauer, S., Thomas, A., Sambo, N.S., Sonntag, F., Lauster, R. and Marx, U. (2015) A Four-Organ-Chip for Interconnected Long-Term Co-Culture of Human Intestine, Liver, Skin and Kidney Equivalents. In: Lab on a Chip.

[17]   Schmieder, F., Schmieder, S., Eger, R., Friedrich, S., Werner, A., Danz, N., Marx, U. and Sonntag, F. (2012) Automated Universal Chip Platform for Fluorescence Based Cellular Assays. Biomedical Engineering/Biomedizinische Technik, 57, 340-343.
http://dx.doi.org/10.1515/bmt-2012-4319

[18]   Pedrotti, F., Pedrotti, L., Bausch, W. and Schmidt, H. (2008) Optik für Ingenieure. Springer, Berlin.

[19]   Günther, K. (2014) Erzeugung und Anwendungspotential von mit dem PLD-Verfahren Hergestellten Superharten Amorphen Kohlenstoffschichten. PhD Dissertation, Shaker-Verlag, Maastricht.

 
 
Top