MSA  Vol.6 No.5 , May 2015
Performance Evaluation of One-Way Concrete Slabs Reinforced with New Developed GFRP Bars
ABSTRACT
The incorporation of fiber-reinforced-polymer (FRP) bars in construction as a replacement to steel bars provides a superior material which is capable to overcome corrosion problems. However, serviceability requirements are important issues to be considered in the design of concrete elements reinforced with glass-FRP (GFRP) bars which are known to have larger deflections and wider crack widths as well as weaker bond compared with steel reinforced concrete. As a solution to this problem, square GFRP bars are proposed. This paper presents the results of an experimental investigation that was performed, in which newly developed square and circular GFRP bars were fabricated in the lab. Also, the GFRP bars were tested and used to reinforce concrete slabs. A total of nine full-scale GFRP-reinforced concrete (RC) one-way slabs were constructed, tested and analyzed, considering the most influencing parameters such as the cross sectional shape of GFRP bars, reinforcement ratio, the concrete characteristics strength, and adding polypropylene fibers to the concrete mixture. The test results were showed that, the tested slabs with GFRP square bars improved the deflection and cracking behavior as well as the ultimate load.

Cite this paper
Ali, A. , Afifi, M. , Abdulsalam, B. , Haggag, H. , Hashimy, A. , El-Sayed, T. and Mohamed, H. (2015) Performance Evaluation of One-Way Concrete Slabs Reinforced with New Developed GFRP Bars. Materials Sciences and Applications, 6, 420-435. doi: 10.4236/msa.2015.65046.
References
[1]   Rizkalla, S., Hassan, T. and Hassan, N. (2003) Design Recommendations for the Use of FRP for Reinforcement and Strengthening of Concrete Structures. Journal of Progress in Structural Engineering and Materials, 50, 16-28.
http://dx.doi.org/10.1002/pse.139

[2]   El-Salakawy, E., Benmokrane, B. and Desgagné, G. (2003) FRP Composite Bars for the Concrete Deck Slab of Wotton Bridge. Canadian Journal of Civil Engineering, 30, 861-870.
http://dx.doi.org/10.1139/l03-055

[3]   Benmokrane, B., El-Salakawy, E., El-Ragaby, A. and Lackey, T. (2006) Designing and Testing of Concrete Bridge Decks Reinforced with Glass FRP Bars. Journal of Bridge Engineering, 11, 217-229.
http://dx.doi.org/10.1061/(ASCE)1084-0702(2006)11:2(217)

[4]   Benmokrane, B., El-Salakawy, E., El-Ragaby, A. and El-Gamal, S. (2007) Performance Evaluation of Innovative Concrete Bridge Deck Slabs Reinforced with Fibre-Reinforced Polymer Bars. Canadian Journal of Civil Engineering, 34, 298-310.
http://dx.doi.org/10.1139/l06-173

[5]   Fish, K.E. (1992) Development Length of Fiber-Composite Concrete Reinforcement. Master’s Thesis, Iowa State University, Ames, 129 p.

[6]   Mosley, C.P., Tureyen, A.K. and Frosch, R.J. (2008) Bond Strength of Nonmetallic Reinforcing Bars. ACI Structural Journal, 105, 634-642.

[7]   Pay, A.C., Canbay, E. and Frosch, F.J. (2014) Bond Strength of Spliced Fiber-Reinforced Polymer Reinforcement. ACI Structural Journal, 111, 257-266.

[8]   Xue, W., Wang, X. and Zhang, S. (2014) Bond Strength of Spliced Fiber-Reinforced Polymer Reinforcement. ACI Materials Journal, 105, 11-19.

[9]   Tighiouart, B., Benmokrane, B. and Mukhopadhyaya, P. (1999) Bond Strength of Glass FRP Rebar Splices in Beams under Static Loading. Construction and Building Materials Journal, 13, 383-392.
http://dx.doi.org/10.1016/S0950-0618(99)00037-9

[10]   Masmoudi, R., Theriault, M. and Benmokrane, B. (1998) Flexural Behavior of Concrete Beams Reinforced with Deformed Fiber Reinforced Plastic Reinforcing Rods. ACI Structural Journal, 95, 665-676.

[11]   Yost, J.R., Gross, S.P. and Dinehart, D.W. (2003) Effective Moment of Inertia for Glass Fiber-Reinforced Polymer- Reinforced Concrete Beams. ACI Structural Journal, 100, 732-739.

[12]   Kassem, C., Farghaly, A.S. and Benmokrane, B. (2011) Evaluation of Flexural Behavior and Serviceability Performance of Concrete Beams Reinforced with FRP Bars. Journal of Composites for Construction, ASCE, 15, 682-695.
http://dx.doi.org/10.1061/(ASCE)CC.1943-5614.0000216

[13]   ASTM (2003) Standard Test Method for Compositional Analysis by Thermogravimetry. ASTM E1131, West Conshohocken.

[14]   CSA (Canadian Standards Association) (2010) Specification for Fibre Reinforced Polymers. CAN/CSA S807-10, Toronto.

[15]   ACI (American Concrete Institute) (2008) Specification for Carbon and Glass Fiber-Reinforced Polymer Bar Materials for Concrete Reinforcement. ACI 440.6M-08, Farmington Hills.

[16]   ASTM (2011) Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars. ASTM D7205, West Conshohocken.

 
 
Top