OJSST  Vol.5 No.2 , June 2015
The Analysis of Process Accidents Due to Risks in the Petrochemical Industries— The Case Study of Radiation Intensity Determination Proportional to Distance from Tank Level
Abstract: Today, one of the basic methods in engaging the decision making of senior managers for securing the organizations regarding assessing risks that the industries face, is the analysis of outcomes of processing accidents. The development of process industries is always associated with an increased risk of accidents. Therefore, paying attention to this case is a priority for the safety units in the oil refineries and petrochemical plants. The aim of this study was to investigate safe distance between the storage tanks of gasoline tanks in the petrochemicals of South Pars Region; comparisons to the American petroleum institute were studied. The maximum of length of flame and the ratio of length to radius of flame were measured 20 m and 2.6 m respectively. If occurrence of leakage and pool fire in one of these tanks, the maximum intensity of thermal radiation was equal to 13.7kw/m2. Hence, there is a possibility to control of fire at a distance of 15 meters from the tanks to heat radiation due to a pool fire, thereby, domino effect does not occur in the event of fire.. The fire is controllable but in case of leakages aggregation and creation of flammable ponds around these tanks, the gathered radiator intensities have immediate explosion potential in the tanks. So, it is proposed, besides increasing the distance between the storage tanks, other measures like quality and safety inspection planning of the connections and controlling instruments of the tanks, inspection of the fire lighting equipment like hydrants, monitors, fire hose reels are done and performance of reaction maneuvers in emergency conditions can take place and be documented and planned.
Cite this paper: Ebrahemzadih, M. , Maleki, A. , Darvishi, E. , Abadi, M. and Dehestaniathar, S. (2015) The Analysis of Process Accidents Due to Risks in the Petrochemical Industries— The Case Study of Radiation Intensity Determination Proportional to Distance from Tank Level. Open Journal of Safety Science and Technology, 5, 21-26. doi: 10.4236/ojsst.2015.52003.

[1]   SFPE (2006) Engineering Guide: Fire Risk Assessment. Society of Fire Protection Engineers.

[2]   Robin, T. and Pitblado, R., Eds. (1996) Risk Assessment in the Process Industries. IChemE, New York.

[3]   Gupta, K. (2010) Design of District Emergency Operations Centres, and the Case Study of Indian Oil Corporation Jaipur Depot Explosion. International Journal of Emergency Management, 7, 221-232.

[4]   CCPS (2000) Guideline for Chemical Process Quantitative Risk Analysis. 2nd Edition, Center for Chemical Process Safety, New York.

[5]   Casal, J. (2008) Evaluation of the Effects and Consequences of Major Accidents in Industrial Plants. Industrial Safety Series, Elsevier, Amsterdam.

[6]   (1994) Draft British Standard Code of Practice for the Application of Fire Safety Engineering Principles to Fire Safety in Building, BSI.

[7]   Advisory Committee on Major Hazards (1984) The Control of Major Hazards. Third Report. Her Majesty’s Stationery Office, London, 1984.

[8]   Levy, J.K. and Gopalakrishnan, C. (2010) Promoting Ecological Sustainability and Community Resilience in the US Gulf Coast after the 2010 Deepwater Horizon Oil Spill. Journal of Natural Resources Policy Research, 2, 297-315.

[9]   Greenstone, M. and Hanna, R. (2011) Environmental Regulations, Air and Water Pollution, and Infant Mortality in India (No. w17210). National Bureau of Economic Research, Cambridge.

[10]   Lev, Y. (1991) Water Protection of Surfaces Exposed to Impinging LPG Jet Fires. Journal of Loss Prevention in the Process Industries, 4, 252-259.

[11]   Mizner, G.A. and Eyre, J.A. (1982) Large-Scale LNG and LPG Pool Fires. EFCE Publication Series, European Federation of Chemical Engineering.

[12]   Cowley, L.T. (1989) The Thermal Impact of LPG (Torch) Fires. Proceedings of the LPGITA Seminar on Fire Protection of LPG Storage Vessels, Solihull, October 1989, 123-131.

[13]   Lees, F.P. (1980) Loss Prevention in the Process Industries. Butterworth-Heinemann, Oxford.

[14]   Green Book (1989) Methods for the Determination of Possible Damage. Rep CPR 16E, Voorburg.

[15]   Chamberlain, G.A. (1997) Development in Design Method for Predicting Thermal Radiation from Flares. Chemical Engineering Research and Design, 65, 299-309.

[16]   Yellow Book (1997) Methods for the Calculation of Physical Effects. 3rd Edition, Part 2, Rep CPR 14E, Voorburg.

[17]   Hubert, P. and Pages, P. (1989) Risk Management for Hazardous Materials Transportation: A Local Study in Lyons. Risk Analysis, 9, 445-451.

[18]   Amir-Heidari, P., Ebrahemzadih, M., Farahani, H. and Khoubi, J. (2014) Quantitative Risk Assessment in Iran’s Natural Gas Distribution Network. Open Journal of Safety Science and Technology, 4, 59-72.

[19]   NFPA15: Standard for Water Spry Fixed System for Fire Protection, 1996.