ANP  Vol.4 No.2 , May 2015
Microwave-Hydrothermal Synthesis of Ferric Oxide Doped with Cobalt
Ferric oxides have drawn significant interest due to their unique properties, relatively low cost, and due to their potential applications in different fields. In this work, cobalt (Co) doped iron oxide (Fe2O3) powders, with crystalline size 36.97 nm were successfully prepared using a microwave- hydrothermal process for the first time and characterised using different techniques. The morphology of the samples was characterised by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive analysis of X-ray spectroscopy (EDAX), Fourier transform infrared (FT-IR) spectroscopy and ultraviolet-visible (UV-Vis) spectroscopy. The images show monodispersed particles with a sharp-edged square morphology. It was found that the average size was about 33.3 nm for Fe2O3 and 36.97 nm for Co-Fe2O3. The Co atomic percentage dopants were approximately 5.73%. The nanosized synthesised materials in this study may find an application in the areas of removal of toxic metal and dyes research.

Cite this paper
Alzahrani, E. , Sharfalddin, A. and Alamodi, M. (2015) Microwave-Hydrothermal Synthesis of Ferric Oxide Doped with Cobalt. Advances in Nanoparticles, 4, 53-60. doi: 10.4236/anp.2015.42007.
[1]   Jain, T.K., Morales, M.A., Sahoo, S.K., Leslie-Pelecky, D.L. and Labhasetwar, V. (2005) Iron Oxide Nanoparticles for Sustained Delivery of Anticancer Agents. Molecular Pharmaceutics, 2, 194-205.

[2]   Jordan, A., Scholz, R., Wust, P., Fahling, H. and Felix, R. (1999) Magnetic Fluid Hyperthermia (MFH): Cancer Treatment with AC Magnetic Field Induced Excitation of Biocompatible Superparamagnetic Nanoparticles. Journal of Magnetism and Magnetic Materials, 201, 413-419.

[3]   Chertok, B., Moffat, B.A., David, A.E., Yu, F.Q., Bergemann, C., Ross, B.D. and Yang, V.C. (2008) Iron Oxide Nanoparticles as a Drug Delivery Vehicle for MRI Monitored Magnetic Targeting of Brain Tumors. Biomaterials, 29, 487-496.

[4]   Suresh, R., Prabu, R., Vijayaraj, A., Giribabu, K., Stephen, A. and Narayanan, V. (2012) Facile Synthesis of Cobalt Doped Hematite Nanospheres: Magnetic and Their Electrochemical Sensing Properties. Materials Chemistry and Physics, 134, 590-596.

[5]   Zboril, R., Mashlan, M. and Petridis, D. (2002) Iron (III) Oxides from Thermal Processes Synthesis, Structural and Magnetic Properties, Mossbauer Spectroscopy Characterization, and Applications. Chemistry of Materials, 14, 969-982.

[6]   Chirita, M., et al. (2009) Fe2O3—Nanoparticles, Physical Properties and Their Photochemical and Photoelectrochemical Applications. Chemical Bulletin of Politehnica, University of Timisoara, Romania, 54,

[7]   Chen, M., et al. (2008) Preparation of Akaganeite Nanorods and Their Transformation to Sphere Shape Hematite. Journal of Nanoscience and Nanotechnology, 8, 3942-3948.

[8]   Hiremath, V.A. and Venkataraman, A. (2003) Dielectric, Electrical and Infrared Studies of γ-Fe2O3 Prepared by Combustion Method. Bulletin of Materials Science, 26, 391-396.

[9]   Hyeon, T., Lee, S.S., Park, J., Chung, Y., and Na, H.B. (2001) Synthesis of Highly Crystalline and Monodisperse Maghemite Nanocrystallites without a Size-Selection Process. Journal of the American Chemical Society, 123, 12798- 12801.

[10]   Huang, J.Y., et al. (2010) In Situ Observation of the Electrochemical Lithiation of a Single SnO2 Nanowire Electrode. Science, 330, 1515-1520.

[11]   Chakrabarti, S., Mandal, S. and Chaudhuri, S. (2005) Cobalt Doped γ-Fe2O3 Nanoparticles: Synthesis and Magnetic Properties. Nanotechnology, 16, 506-511.

[12]   Katsuki, H. and Komarneni, S. (2011) Low Temperature Synthesis of Nano-Sized BaTiO3 Powders by the Microwave-Assisted Process. Journal of the Ceramic Society of Japan, 119, 525-527.

[13]   Katsuki, H. and Komarneni, S. (2001) Microwave-Hydrothermal Synthesis of Monodispersed Nanophase α-Fe2O3. Journal of the American Ceramic Society, 84, 2313-2317.

[14]   Sun, P., Wang, C., Zhou, X., Cheng, P.F., Shimanoe, K., Lu, G.Y. and Yamazoe, N. (2014) Cu-Doped α-Fe2O3 Hierarchical Microcubes: Synthesis and Gas Sensing Properties. Sensors and Actuators B: Chemical, 193, 616-622.

[15]   Morales, A.E., Mora, E.S. and Pal, U. (2007) Use of Diffuse Reflectance Spectroscopy for Optical Characterization of Un-Supported Nanostructures. Revista Mexicana de Fisica Supplement, 53, 18-22.

[16]   D’Souza, L.P., Shree, S. and Balakrishna, G.R. (2013) Bifunctional Titania Float for Metal Ion Reduction and Organics Degradation, via Sunlight. Industrial & Engineering Chemistry Research, 52, 16162-16168.

[17]   Pozan, G.S., Isleyen, M. and Gokcen, S. (2013) Transition Metal Coated TiO2 Nanoparticles: Synthesis, Characterization and Their Photocatalytic Activity. Applied Catalysis B: Environmental, 140, 537-545.

[18]   Liu, J., Liang, C.H., Xu, G.P., Tian, Z.F., Shao, G.S. and Zhang, L.D. (2013) Ge-Doped Hematite Nanosheets with Tunable Doping Level, Structure and Improved Photoelectrochemical Performance. Nano Energy, 2, 328-336.

[19]   Merkle, R.C. (2000) Molecular Building Blocks and Development Strategies for Molecular Nanotechnology. Nanotechnology, 11, 89-99.

[20]   Habibi, M.H. and Habibi, A.H. (2013) Effect of the Thermal Treatment Conditions on the Formation of Zinc Ferrite Nanocomposite, ZnFe2O4, by Sol-Gel Method. Journal of Thermal Analysis and Calorimetry, 113, 843-847.

[21]   Zhou, K.W., Wu, X.H., Wu, W.W., Xie, J., Tang, S.Q. and Liao, S. (2013) Nanocrystalline LaFeO3 Preparation and Thermal Process of Precursor. Advanced Powder Technology, 24, 359-367.

[22]   Linxu, S. and Ping, L. (2010) Preliminary Exploration on Water Pollution from Non-Point Source in Xiang Xi River. Proceedings of the 4th International Conference on Bioinformatics and Biomedical Engineering (iCBBE), Chengdu, 18-20 June 2010, 1-5.

[23]   Wu, J.-M., Zhang, T.-W., Zeng, Y.-W., Hayakawa, S., Tsuru, K. and Osaka, A. (2005) Large-Scale Preparation of Ordered Titania Nanorods with Enhanced Photocatalytic Activity. Langmuir, 21, 6995-7002.

[24]   Pfitzner, A., Dankesreiter, S., Eisenhofer, A. and Cherevatskaya, M. (2013) Heterogeneous Semiconductor Photocatalysis. In: Konig, B., Ed., Chemical Photocatalysis, de Gruyter, Berlin, 211-246.

[25]   Pal, B. and Sharon, M. (2000) Preparation of Iron Oxide Thin Film by Metal Organic Deposition from Fe (III)-Acety- lacetonate: A Study of Photocatalytic Properties. Thin Solid Films, 379, 83-88.

[26]   Devi, L.G., Kottam, N., Murthy, B.N. and Kumar, S.G. (2010) Enhanced Photocatalytic Activity of Transition Metal Ions Mn2+, Ni2+ and Zn2+ Doped Polycrystalline Titania for the Degradation of Aniline Blue under UV/Solar Light. Journal of Molecular Catalysis A: Chemical, 328, 44-52.

[27]   Satheesh, R., Vignesh, K., Suganthi, A. and Rajarajan, M. (2014) Visible Light Responsive Photocatalytic Applications of Transition Metal (M = Cu, Ni and Co) Doped α-Fe2O3 Nanoparticles. Journal of Environmental Chemistry Engineering, 2, 1956-1968.