EPE  Vol.7 No.5 , May 2015
Reliable Energy Strategy Based on Incandescent Lighting
Abstract: The artificial lighting used today in home and workplace have confirmed capability to induce skin problems, DNA damage, tumor formation as well as worsening arthritis, migraine and visual fatigue by longer exposure of ultraviolet radiation from discharge lighting sources. In this paper an ignition-angle controller (IAC) is used to demonstrate the reliability of incandescent lamps (ILs) in comparison with discharge lighting feed by switching-mode supplies. Analysis of harmonic of the line-current flow consumed by the ignition-angle controller (IAC) circuit has shown that production of distorted rms currents does not produce hazard, because single harmonic distortion (SHD) values are keeping lower to 50%. As energy policy, the modern artificial lighting must be replaced by economical, stable and nonhazardous incandescent lamps (ILs).
Cite this paper: Baca, R. (2015) Reliable Energy Strategy Based on Incandescent Lighting. Energy and Power Engineering, 7, 174-180. doi: 10.4236/epe.2015.75017.

[1]   Lim, S.R., Kang, D, Ogunseitan, O.A. and Schoenung, J.M. (2014) Potential Environmental Impacts from the Metals in Incandescent, Compact Fluorescent Lamp (CFL), and Light Emitting Diode (LED) Bulbs. Environmental Science Technology, 47, 1040-1047.

[2]   Aman, M.M., Jasmon, G.B., Mokhlis, H. and Bakar, A.H.A. (2013) Analysis of the Performance of Domestic Lighting Lamps. Energy Policy, 52, 482-500.

[3]   Peretto, L., Pivello, E., Tinarell, R. and Emanuel, A.E. (2007) Theoretical Analysis of the Physiologic Mechanism of Luminous Variation in Eye-Brain System. IEEE Transaction on Instrumentations and Measurement, 56, 164-170.

[4]   Diffey, B.L. (2002) Sources and Measurement of Ultraviolet Radiation. Methods, 28, 4-13.

[5]   Klein, R.S., Sayre, R.M., Dowdy, J.C. and Werth, V.P. (2009) The Risk of Ultraviolet Radiation Exposure from Indoor Lamps in Lupus Erythematosus. Autoimmunity Reviews, 8, 320-324.

[6]   Welz, T., Hischier, R. and Hilty, L.M. (2011) Environmental Impacts of Lighting Technologies—Life Cycle Assessment and Sensitivity Analysis. Environmental Impact Assessment Review, 31, 334-343.

[7]   Wuidart, L. (1995) Understanding Power Factor-Application Note. SGS-THOMSON Microelectronics, USA.

[8]   Khan, N. and Abas, N. (2011) Comparative Study of Energy Saving Light Sources. Renewable and Sustainable Energy Reviews, 15, 296-309.

[9]   Durakiewic, T., Sikora Z.J. and Halas, S. (2006) Work Function Variations of Incandescent Filaments during Self- Cooling in Vacuum. Vacuum, 80, 894-898.

[10]   MacIsaac, D., Kanner, G. and Anderson, G. (1999) Basic Physics of the Incandescent Lamp (Lightbulb). The Physics Teacher, 37, 520-525.

[11]   Baliga, B.J. (1992) Modern Power Devices. John Wiley & Sons, New York.

[12]   Sedra, A.S. and Smith, K.C. (1998) Microelectronics Circuits. Oxford University Press, New York.

[13]   Wang, C.S. (2008) Flicker-Insensitive Light Dimmer for Incandescent Lamps. IEEE Transactions on Industrial Electronics, 55, 767-772.

[14]   Rashid, M.H. (1995) Power Electronics Circuits. Devices and Applications. Prentice Hall Inc., New York.

[15]   Baca, R. (2013) Design Method Based on Normalized Functions for a Toroidal Inductor Applied to Power-Quality Evaluation. Energy and Power Engineering, 5, 206-211.