This work studies the mechanical properties of the soil cement brick and soil cement brick mixed with fly ash from the east of Thailand, Rayong province. The purpose is to develop the new low cost materials used in the local area of Thailand. Results show that the average of the compressive strength and the modulus of rupture (MOR) of soil cement brick mixed with Eastern Rayong fly ash are lower than those of non-fly ash soil cement brick. Also both properties values increase with increasing cured time. However, the thermal conductivity shows the decreasing trend with increasing fly ash content. By conclusion, considered by mechanical properties show that soil cement brick mixed with an Eastern Rayong fly ash can efficiently produce as the structural clay load- bearing tile.
 Kumar, S. (2003) Fly Ash-Lime-Phosphogypsum Hollow Blocks for Walls and Partitions. Building and Environment, 38, 291-295. http://dx.doi.org/10.1016/S0360-1323(02)00068-9
 Chiang, K.-Y., Chou, P.-H., Hua, C.-R., Chien, K.-L. and Cheeseman, C. (2009) Lightweight Bricks Manufactured from Water Treatment Sludge and Rice Husks. Journal of Hazardous Materials, 171, 76-82. http://dx.doi.org/10.1016/j.jhazmat.2009.05.144
 Xu, L.L., Guo, W., Wang, T. and Yang, N.R. (2005) Study on Fired Bricks with Replacing Clay by Fly Ash in High Volume Ratio. Construction and Building Materials, 19, 243-247. http://dx.doi.org/10.1016/j.conbuildmat.2004.05.017
 Cultrone, G. and Sebastian, E. (2009) Fly Ash Addition in Clayey Materials to Improve the Quality of Solid Bricks. Construction and Building Materials, 23, 1178-1184. http://dx.doi.org/10.1016/j.conbuildmat.2008.07.001
 Demirboga, R. and Gul, R. (2003) The Effects of Expanded Perlite Aggregate, Silica Fume and Fly Ash on the Thermal Conductivity of Lightweight Concrete. Cement and Concrete Research, 33, 723-727. http://dx.doi.org/10.1016/S0008-8846(02)01032-3
 Oti, J.E., Kinuthia, J.M. and Bai, J. (2009) Engineering Properties of Unfired Clay Masonry Bricks. Engineering Geology, 107, 130-139. http://dx.doi.org/10.1016/j.enggeo.2009.05.002
 Toledo, R., dos Santos, D.R., Faria Jr., R.T., Carrio, J.G., Auler, L.T. and Vargas, H. (2004) Gas Release during Clay Firing and Evolution of Ceramic Properties. Applied Clay Science, 27, 151-157. http://dx.doi.org/10.1016/j.clay.2004.06.001
 González, I., Galán, E., Miras, A. and Vázquez, M.A. (2011) CO2 Emissions Derived from Raw Materials Used in Brick Factories: Applications to Andalusia (Southern Spain). Applied Clay Science, 52, 193-198. http://dx.doi.org/10.1016/j.clay.2011.01.003
 Alam, S.A. and Starr, M. (2009) Deforestation and Greenhouse Gas Emission Associated with Fuel Wood Consumption of the Brick Making Industry in Sudan. Science of the Total Environment, 407, 847-852. http://dx.doi.org/10.1016/j.scitotenv.2008.09.040
 Koroneos, C. and Dompros, A. (2007) Environmental Assess-ment of Brick Production in Greece. Building and Environment, 42, 2114-2123. http://dx.doi.org/10.1016/j.buildenv.2006.03.006
 Namboonruang, W. (2014) Techno-Eco Assessment and Sustainable Development of a Novel “Muban Chombueng Product” of the Local Industries of Thailand. Advanced Materials Research, 953-954, 1505-1508. http://dx.doi.org/10.4028/www.scientific.net/AMR.953-954.1505
 American Standard Testing and Materials (1996) Standard C117, Standard Test Methods for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot Plate Apparatus. ASTM, West Conshohocken, USA.