AJIBM  Vol.5 No.4 , April 2015
Innovative Mining Equipment: Key Factors for Successful Implementation
Abstract: With increasing social pressures over the past two decades, mining companies have become more concerned with occupational health and safety (OHS). This change in mentality has had an impact on the choice of new equipment introduced underground. Introduction of innovative mining equipment must now meet the double challenge of improving both productivity and OHS. However, innovative equipment does not by itself ensure success. The aim of this study is to identify the key factors that underlie successful introduction of new equipment in underground mines. We used a multi-attribute decision-aid tool, namely the dominance-based rough-set approach. Ten innovative equipment projects carried out in an underground mine in Quebec were analysed. The tool allowed simultaneous identification of the most relevant factors and critical thresholds thereof to establish levels of performance based on four indicators, namely cost per meter drilled, cost per hour of use, availability ratio and accident rate. Two factors were found most relevant to all four indicators of performance: the skill requirement and acceptance of the equipment by the operators. Seat quality was identified as a contributor to improving accident rate, while standardisation of the new equipment relative to the old contributed to productivity. Taking into consideration these key factors and their critical threshold values will help the directors of the participating mine to meet with success in terms of both productivity and OHS in future introduction of innovative equipment projects.
Cite this paper: Boudreau-Trudel, B. , Nadeau, S. and Zaras, K. (2015) Innovative Mining Equipment: Key Factors for Successful Implementation. American Journal of Industrial and Business Management, 5, 161-171. doi: 10.4236/ajibm.2015.54018.

[1]   Bartos, P. (2007) Is Mining a High-Tech Industry? Investigations IntoInnovation and Productivity Advance. Resources Policy, 32, 149-158.

[2]   Vallières, M. (1989) Mines and Men: History of the Mineral Industry from Quebec—Des Mines et des Hommes: Histoire de l’Industrie Minérale Québécoise. Les Publications du Québec, Québec.

[3]   Groupe de Travail sur le Permis Social (2010) Report on the Performance of the Mining Sector 1998-2009—Rapport sur la Performance du Secteur Minier 1998-2009. Conférence des ministres de l’énergie et des mines de 2010.

[4]   Upstill, G. and Hall, P. (2006) Innovation in the Minerals Industry: Australia in a Global Context. Resources Policy, 31, 137-145.

[5]   Dhillon, B.S. (2010) Mine Safety: A Modern Approach. Springer, London.

[6]   CEMI (Center for Excellence in Mining Innovation) (2013) Mine Automation—A Vision of Our Future. Ultra-Deep Mining Workshop, Sudbury, 12-13 June 2013.

[7]   Ural, S. and Demirkol, S. (2008) Evaluation of Occupational Safety and Health in Surfaces Mines. Safety Science, 46, 1016-1024.

[8]   Kecojevic, V., Komljenovic, D., Groves, W. and Radomsky, M. (2007) An Analysis of Equipment-Related Fatal Accidents in U.S. Mining Operations: 1995-2005. Safety Science, 45, 864-874.

[9]   Smets, M., Eger, T.R. and Grenier, S. (2010) Whole-Body Vibration Experienced by Haulage Truck Operators in Surface Mining Operations: A Comparison of Various Analysis Methods Utilized in the Prediction of Health Risks. Applied Ergonomics, 41, 763-770.

[10]   Ruff, T., Coleman, P. and Martini, L. (2011) Machine-Related Injuries in the US Mining Industry and Priorities for Safety Research. International Journal of Injury Control and Safety Promotion, 18, 11-20.

[11]   Trudel, B., Nadeau, S., Zaras, K. and Deschamps, I. (2012) The Impact of Technological Innovation on Productivity and OHS Performance in Mining. Proceedings of the 2012 Conference of the Nordic Ergonomics Society (NES2012), Stockholm, 19-22 August 2012, 90.

[12]   Greco, S., Matarazzo, B. and Slowinski, R. (2001) Rough Sets Theory for Multi-Criteria Decision Analysis. European Journal of Operational Research, 129, 1-47.

[13]   Zaras, K. (2004) Rough Approximation of a Preference Relation by a Multi-Attribute Dominance for Deterministic, Stochastic and Fuzzy Decision Problems. European Journal of Operational Research, 159, 196-206.

[14]   Chadwick, J. (2008) Moving Ore Efficiently. International Mining, 38-46.

[15]   Horberry, T., Burgess-Limerick, R. and Steiner, L. (2011) Human Factors for the Design, Operation, and Maintenance of Mining Equipment. CRC Press, New York.

[16]   Karmis, M. (2001) Mine Health and Safety Management. Society for Mining, Metallurgy, and Exploration, Inc., Littleton.

[17]   Coleman, P.J. and Kerkering, J.C. (2007) Measuring Mining Safety with Injury Statistics: Lost Workdays as Indicators of Risk. Journal of Safety Research, 38, 523-533.

[18]   MSHA (Mine Safety and Health Administration) (2013) Mine Injury and Worktime, Quarterly. Yearly Reports, January-June 2013 (Preliminary).

[19]   Dessureault, P.C. and Doucet, M. (2003) Evaluation of the Thermal Constraint Indicators in Deep Mining— évaluationdes Indices de Contrainte Thermique en Mines Profondes. R-350, Institut de Recherche Robert-Sauvé en Santé et en Sécurité du Travail, Montréal.

[20]   Trudel, B., Nadeau, S., Zaras, K. and Deschamps, I. (2014) Introduction of Innovative Equipment in Mining: Impact on Productivity. American Journal of Industrial and Business Management, 4, 31-39.

[21]   Trudel, B., Nadeau, S., Zaras, K. and Deschamps, I. (2014) Introduction of Innovative Equipment in Mining: Impact on OHS. Open Journal of Safety Science and Technology, 4, 49-58.

[22]   Laboratory of Intelligent Decision Support Systems (LIDSS) (2014) Software jMAF. Institute of Computing Science, Poznan University of Technology.

[23]   Wilde, G.J.S. (1982) The Theory of Risk Homeostasis: Implications for Safety and Health. Risk Analysis, 2, 209-225.

[24]   Wilde, G.J.S. (1988) Risk Homeostasis Theory and Traffic Accidents: Propositions, Deductions and Discussion of Dis-sension in Recent Reactions. Ergonomics, 31, 441-468.

[25]   Wilde, G.J.S. (1998) Risk Homeostasis Theory: An Overview. Injury Prevention: Journal of the International Society for Child and Adolescent Injury Prevention, 4, 89-91.

[26]   Lynas, D. and Horberry, T. (2011) Human Factor Issues with Automated Mining Equipment. The Ergonomics Open Journal, 4, 74-80.

[27]   Dhillon, B.S. (2009) Mining Equipment Safety: A Review, Analysis Methods and Improvement Strategies. International Journal of Mining, Reclamation and Environment, 23, 168-179.

[28]   Eger, T., Stevenson, J., Boileau, P.-E. and Salmoni, A., Vibration Research Group (2008) Predictions of Health Risks Associated with the Operation of Load-Haul-Dump Mining Vehicles: Part 2—Evaluation of Operator Driving Postures and Associated Postural Loading. International Journal of Industrial Ergonomics, 38, 801-815.

[29]   Roque, N., Nadeau, S. and Badri, A. (2014) Preliminary Ergonomics of a Bolting Machine and a Drill Used in Underground Mining. Proceedings of the Gesellschaftfür Arbeitswissenschaft (GFA2014), Munich, 12-14 March 2014, 339-341.

[30]   Christensen, M. (1992) Exploring the Limits of the Technology S-Curve, Part I: Components Technologies. Production and Operations Management, 1, 334-357.

[31]   Groves, W.A., Kecojevic, V.J. and Komljenovic, D. (2007) Analysis of Fatalities and Injuries Involving Mining Equipment. Journal of Safety Research, 38, 461-470.